artika GB390L-HDBL Essence Glow Box LED Wall Light Instruction Manual

artika GB390L-HDBL Essence Glow Box LED Wall Light

Customer service
Monday to Friday
9 a.m. – 5 p.m. EST

1-866-661-9606
support@artika.com
www.artika.com

INCLUDED

+ 1 extra

| Hex-L key| × 1
| Mounting bracket Support| × 1
| Rubber washer| × 2
| LED wall light with glass diffuser| × 1

WARRANTY

Artika For Living Inc. is proud to offer you a three-year (3) limited warranty on manufacturing defects from the date of purchase for residential use only. The warranty is extended to the original owner in USA, Canada, Mexico, UK, Iceland, France and Spain and is non-transferable. It does not apply to retailers, commercial applications or establishments. The original sales receipt is required for all warranty claims. The remedy under this limited warranty shall be product or part replacement at Artika’s discretion as provided herein and cannot exceed the original purchase price.

This warranty is valid only on products installed in accordance with the building code and laws effective in the region where the unit is being used, as well as in accordance with the provided instruction manual. It does not cover products installed incorrectly or subjected to abnormal use. Product(s) or component part(s) may be required to be returned for inspection and verifi cation.

Normal wear and tear, misuse, negligence, vandalism, improper maintenance (surface damage due to chemical interaction or cleaning agents including, but not limited to, scouring pads, use of cleaners containing abrasives, alcohol or other organic solvents) improper handling, accident, abuse, fire, flood, theft, acts of God, neglect, or alteration of the product will not be covered under this limited warranty. It excludes any accessories that accompany the product including, but not limited, to bulbs or batteries.

The warranty does not cover handling, labour, transportation, or any other cost associated with the installation or replacement of the product. This limited warranty is valid in the country of purchase and by Artika authorized retailers only.

Artika for Living Inc. will not be held responsible for any direct or consequential damages or injuries related to the use of this product arising from improper use or installation of this product.
Please visit www.artika.com to discover more about Artika for Living Inc.

USA (FCC)

WARNING:
Changes or modifi cations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device does not cause harmful interference, and
2. this device must accept any interference received,including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WHAT YOU WILL NEED…

WARNING:
Risk of electrical shock. Turn off breaker at the panel.
Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.

CAUTION: If using a dimmer, it must be LED compatible.

IMPORTANT
The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty.

We recommend that this product be installed by a certifi ed electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certifi ed electrician, according to the electrical and building codes effective in the region where the unit is used.

REPLACEMENT PARTS

Description: Hardware kit
Artika # TRIA-BL/KIT

TO ORDER REPLACEMENT PARTS, PLEASE CONTACT CUSTOMER SERVICE.
(Service available only in the USA and Canada).

Operation is subject to the following two conditions:

1. this device does not cause interference, and
2. this device must accept any interference received, including inteference that may cause undesired operation.

FOR OUTSIDE INSTALLATION:
Apply sealant to seal the sides and top of the light fixture to the wall. TO ALLOW MOISTURE TO DRAIN, DO NOT SEAL BOTTOM SIDE OF THE BACKPLATE (fi g. 3).

MINIMUM CLEARANCE:
Please ensure there is a minimum clearance of 1.2 m between the floor and the bottom of the light fixture (fig. 1).

STEP-BY-STEP INSTALLATION

1. Turn off the power at the circuit breaker and the light switch. Ensure the power is off before removing the old light fi xture.

2. Remove the mounting bracket from the light fi xture by unscrewing the mounting screws.

3. Install the mounting bracket to the junction box. Ensure that the two screw threads are pointing away from the wall and are in a horizontal position.

4. Attach the hook to the mounting bracket.

5. Connect the white neutral wire (N) from the light fi xture to the white supply wire (N) from the junction box using a wire connector. Connect the black supply wire (L) from the light
   fixture to the black supply wire (L) from the junction box using a wire connector. Connect the ground wire (G) from the light fi xture to the ground wire (G) from the junction box using a wire connector.

6. Push the wires into the junction box. Mount the light fixture onto the screw threads and secure it with the washers and decorative nuts. (fig. 2)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>