4DRC 4D-V2 Mini Drone Instruction Manual

4DRC 4D-V2 Mini Drone Instruction Manual

Thank you for purchasing our product. In order to use it correctly and make sure safety, please read the instruction book carefully before using. For your further reference please keep it well.

IMPORTANT NOTICE

1. Quadcopter is not a toy. There is still some risks exist. Please be sure to correctly use strictly in accordance with the safety notes and instructions. Any modification or improper use of the product may cause unexpected danger or accident. Please do not overlook.
2. This product is not suitable for users under 14 years old. Please ensure the product is operated under safe environment. Manufacturer and dealer assume no liability for accidental damages by abnormal wear of parts, improper assembly, or operation in unsafe manners.
3. This RC drone requires high flying skills. Any demages caused by wrong operations of disassemble and usage, can not be replaced, returned and exchanged under the warranty. If issues with usage, operation and maintenance happened, our company or distributors will provide you technical guidance and spare parts supply at special prices.
4. This RC drone is dangerous for beginners to fly. It should fly away from people, especial for beginner pilots. Improper assembly, demaged parts, wrong operations may cause unforeseen accidents such as injuries resulting from the losing control of the flight, etc. The pilots must pay attention to the flying safety and well know his/her flying ability for any accidents by his/her negligence.
5. This RC drone can fly indoor and outdoor. Do not fly it in unsafe places, such as nearing heat sources, high-voltage power cables, and forbidden flying drones.

INTRODUCTION OF AIRCRAFT:

PARTS OF THE CONTROLLER

1. Emergency Stop (Short press)/ One-key adjustment (Press and hold)

2. One-key take off (Short press)
   One-key landing (Press and hold)

3. One-key return (Press and hold) Headless mode (Short press)

4. One-key rotation I One-key hovering

5. 3 levels of speed

6. Throttle / left and right controlling stick

7. Backward trimming

8. Forward trimming

9. Right trimming

10. Left trimming

11. Power

12. Flips

13. Forward & backward I left & right side fly controlling stick

Battery Installation of the Controller

The method of installing the batteries:
Open the battery cover on the back of the controller , according to the polarity instruction on the battery box, loaded 2 AAA batteries correctly.( Batteries are not included.)

CAUTION:

1. Make sure the battery and its polarity in the battery compartment should be correct. Please don’t load the batteries upside down.
2. Please don’t mix the old batteries with the new ones.
3. Please don’t mix using batteries of different types.

THE INSTRUCTION OF LITHIUM BATTERY CHARGING

Insert the USS plug into the computer or a power supply with a socket, voltage 3.7V, current less than 2A, and then plug the other end into the module battery. When charging, the red indicator light of the product does not light, indicating that charging is in progress, and the charging saturation indicator lights up! Charging time is about 60 minutes.

As the product is a high-end product, the design only supports the use of computers or chargers less than 3.7v for charging. It is strictly prohibited to use other non-standard chargers to charge the battery!

WARNING
If you do not want to play this quadcopter, disconnect the module battery from the aircraft.

Attention:

1. Make sure the voltage of the adapter fits the local electricity supply.
2. The Charging plug will overheat while overcharged. Please stop charging immediately for it could cause serious damage to the battery.
3. Do not leave the battery aside when charging.
4. When the aircraft has just finished flying, the battery temperature is higher. It is best to wait for about 30 minutes until the battery is cooled before charging the lithium battery, otherwise the battery will be damaged.
5. Recharge the battery 30 minutes later after flying.because the battery temperature could be too high when flying and charging immediately could damage the battery.
6. Do not throw the battery into fire in consideration of safety.
7. Do not short circuit the battery. Do not leave the battery together with tiny medal parts in consideration of safety.

OPERATIONAL APPROACH

NOTICE: If the rudder lever is not pushed during the flight and the aircraft is still flying sideways in the air, the rudder fine-tuning button can be adjusted.

Caution : When the quadrocopter ascends to 30cm high, it will affected by the blade vortex made by itself, and become unstable. This is “ground effect”. The lighter the quadrocopter, the greater the effect.

READY TO FLY

3D Flips and Rolls Flight

When the basic functions can be skillful operated, you can play some adventurous tumblings. Flying the quadrocopter above the ground more than 3 meters, hovering,then push the tumbling button (key@)on the controller.At this moment,when you can hear a beep from the controller, please push the direction panel. If you push forward, the quadrocopter will tumble forward; if you push backward, the quadrocopter will tumble backward. Every time you want to complete a tumble, you need to push the tumbling button. Continuous tumbling can be done if familiar.

Headless Mode instructions

Since the flight direction is consist with the operating direction of the controller, there is no need to worry about too far to recognize the flight direction of the quadrocopter. So that the operation is more convenience and easier (Figure 1).

Headless Mode Operation:
When staring up and adjusting frequency, the controller should directly facing the tail of the quadrocopter (Figure 2). In normal flight, you can hear a beep when you push the headless mode button(Refer to page 2 “Parts of the controller”), that means the quadrocopter is already on headless mode and the navigational light is flashing. When you push the headless button again, you can hear a beep again, that means the quadrocopter drop out of the headless mode. In headless mode, the quadrocopter should stay directly in front of the controller. When you pushing the direction lever forward, that means flying forward. When you pushing the direction lever backward, that means flying backward. Push to the left means left side flight; push to the right means right side flight.

ONE KEY AUTOMATIC RETURN FUNCTION

When quadrocopter flies too far, we can call the quadcipter back by one key automatic return function.

Operational Approach
When the aircraft flies too far, the one key automatic return function can help to recall the quadrocopter(Refer to page 2 “Parts of the controller”). In flight, you can hear a beep when push the one key automatic return button, then the aircraft will enter one key return mode and  fly back automatically. And you can remove the return mode by handling the lever randomly.

CAUTIONS:
One key automatic return function only can work when you use it at the place you turned it on.

PROBLEMS AND SOLUTIONS

PRECAUTIONS:

1. The remote controlled distance will be shorten when the battery power of the quarocopter/ transmitter is insufficient.
2. When the power of the aircraft is insufficient, the quadrocopter would have trouble to take off or unable to fly high.
3. Please repair the quadrocopter in time when it is damaged. Don’t fly the quadrocopter when it is seriously damaged (rotor wing breakage), or it might lead to injury.
4. Please remove the batteries to avoid the damage to the product caused by batteries leakage if you do not use the transmitter for a long time.
5. Don’t crash the quadrocopter from high altitude or crash it seriously, or might shorten the lifetime of the quadrocoptor.
6. Once the accessories was damaged, should be replaced by the accessories produced by our company, or the flight and safety performance would be effected.

INSTRUCTIONS FOR REMOTE CONTROL

STARTING THE QUADCOPTER

BAROMETRIC PRESSURE HOVERING AND ALTITUDE-HOLD FUNCTION
Use the left control stick (throttle) to control the quadcopter’s ascent/descent. When you let go of the left control stick (throttle), the quadcopter would remain hovering at the altitude it was at when the left control stick (throttle) was let go.

TURNING OFF THE QUADCOPTER
Pull the lever on the left (throttle) to the lowest point. After a few seconds, the propeller of the quadcopter will stop rotating.

ONE-KEY LANDING
When the quadcopter is flying high in the air, press the “One-key Landing” key once and the quadcopter would land slowly. At this time, you can move the quadcopter to a certain spot by using the direction-change or left control stick. The quadcopter’s propellers would then stop rotating

EMERGENCY STOP
In case of emergency during the flight, press the emergency stop button to stop the aircraft so as not to cause harm.

1. Install the drone’s app

1. Search “HT-FPV” in APP store or in Google Play to get the app 2. Scan the QR code to dO\mload the app .

ASSEMBLY INSTRUCTIONS

Pull out the plastic parts in alignment with the remote control slot.

• Aim the phone holder at the remote control slot.
• Lift the assembled phone holder up and place the phone at the position of the phone holder.

BOOT PROGRAM

1. Load the battery into the battery tank of the aircraft.
2. Turn on the power switch at the top of the aircraft fuselage (the aircraft’s four LED lights flicker).
3. Turn on the power switch of the remote control
4. Push the left joystick throttle to the highest point, then return to the lowest point (the aircraft’s 4 LED lights are always on), Then complete the aircraft code.

TECHNICAL PARAMETERS
Body Length: 88 mm Width: 99mm
Height: 30mm The Length of Rotor Wing: 42mm

Warnings: In order to ensure the requirements of aviation radio (station) on the electromagnetic environment, it is prohibited to play any kinds of remote controlled products with 5000 meters area by taking airport runway center as the dot radius, it shall be required to stop the use of model toys in the regions during the period of radio control command issued by relevant state departments!

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>