BMAX MB01 Tablet PC User Manual
- June 6, 2024
- BMAX
Table of Contents
BMAX MB01 Tablet PC
Caution:
Thank you for purchasing the BMAX product. Please read this manual carefully before using the product to gain maximum benefits.
- The new battery is only able to achieve the best performance after two to three times fully charge and discharge.
- To prevent data loss. it is recommended to backup important personal data regularly especially before performing a firmware upgrade. We are not responsible for any losses caused by data loss.
- Please don’t disassemble the device by yourself as it has high precision.
- Please avoid strong bea1 and splashing water drop on the device as it will cause physical damages.
- Please avoid using the device In the following environments: high temperature, low temperature, humid, dusty, powerful magnetic field and long-term exposure under sunlight. We recommend that you use this product in an M environment of 3000 meters above sea level, o•c to 35″C, and humidity of 5% to 95%.
- Please only use the battery. charger and accessories which safety is approved by the manufacturer. It will b,e violate the warranty regulations or maybe dangerous if you use any other unqualified accessories.
Tips:
- Please note the nominal battery duration refers to the longest time can be achieved with minimum power consumption. There real-time power duration might be varied in different usage scenarios.
- Volume calculation:
- This volume calculation is different between hardware manufacturer( lMB= lOOOKB)but operating system{lM8′>1024KB) Such as a 8GB product. software read the capacity s•1000MB’ 1000KB” 10006/1024MB/1024KB/1024B”-‘7.45GB, there will be 0.55GB difference.The larger e,;pacity,the bigger difference
- Android system occupies some of the disk space The nominal battery capaicity is count calculating the actual charge amount during charging and discharging, deviation exist by using third-party tools to detect the battery capacity.
Appearance Introduction:
‘Anti Finger Print: The Anti finger print technology m3 the TP has good light transmission. smoother feeling, and , its not easy!
Charger specification
- Output voltage range; SV-5.2V
- Output current range:2.0A-3A
- Please only use the charger that meets the above specification.
- Please do a fully recharge per 3 months if you don’t use it for a long time.
- The charging status will be shown after 30mins if you don’t use it for a long time.
Power button:
Virtual button bar
- HOME button dick to return to the main screen
- Backbuttondick to return to the previous screen
- Background button click to view, switch and close background apps
- Menu button click to pull out menu
- Screen shot button click to save a screenshot of the current screen
- volume+ increase volume
- Volume – decrease volume
Pull-down notificati
- Auto brightness: dick to quickly turn on or off the auto brightness function
- Do not disturb: you can set the time of none-disturbing
- Eye protection mode: you can quickly open the eye protection mode
- Power saving mode: you can quickly turn on the power-saving modeon bar
- User clicks to switch local user accounts
- Settings click to access to system settings
- Battery click to access battery settings
- Wi-Fi dick to turn on/off Wi-Fi
- Bluetooth click to turn on/off Bluetooth
- Flight mode click to turn on/off Hight mode
- Auto-rotation click to turn on/off auto-relation
- GPS click to turn on/off GPS
- Screenshot: you can use screenshot function.
Fingerprint recognition
- For the first time entering the system, you can see the screen lock (using the fingerprint unlock) option in th<> settings After emerging, you can set it according to the instructions.
- After entering the fingerprint, touch the fingerprint sensor. then you can unlock the screen.
- The fingerprint sensor also has the following features: Double-dick the sensor to switch the list of background programs. Long press.s the sensor 3 seconds to achieve Home key function. Click the sensor in the camera mode to take a photo.
Eye mode
- Settings–Display–MiraVision.Click logo on the top-left to find Blulight defender ,then choose turn on /off by the button on the top-right. You can also adjust the level by removing the bottom bar.
- You can also find this function from Pull Down Menus.
Color temperature
Enter MiraVision and click the logo on the top-left , then choose picture mode –User mode –click the logo on the top-left –Color temperature. You can adjust the level by removing the bottom bar.
Adaptive brightness
Settings–display–adaptive brightness, you can also find this option from “Pull Down Menus”.
App permissions
Settings–Apps click the setting logo on the top-right App permissions.
Ultra-battery saver
You can find this function from Pull-Down Menus.
Beauty Function
You can download beauty Apks to take nice photos.
Software Management
Use this program to prevent APK automatic booting during power on.
- Click the mark on tl1e top right to get more Apk management.
- New Apks : You can disable recently installed Apks.
- The third-party Apks: You can disable the third-party Apks.
- All Apps: You can disable all Apks.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the nterference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement:
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types: TP SERIES (FCC ID: 2AWWW-MB01) has also been tested against this
SAR limit. The highest SAR value reported under this standard during product
certification for body-worn operation is 0.719W/kg and Simultaneous
Transmission on the body is 1.060W/kg.
This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 0mm must be maintained
between the user’s body and the handset, including the antenna. Third-party
belt-clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>