PHYn PHYCF009 Smart Water Assistant Instruction Manual
- June 6, 2024
- PHYn
Table of Contents
Onboarding – Installation
| |
---|---|---
| |
---|---|---
| |
---|---|---
| |
---|---|---
| |
---|---|---
| |
---|---|---
| |
---|---|---
| |
---|---|---
| |
---|---|---
FRONT
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and devices
- Connect the equipment to an outlet other than the receiver’s
- Consult a dealer or an experienced radio/TV technician for assistance
Radio Frequency 2.4GHz band operation of this product in the USA is firmware- limited to channels 1 through 11.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body. This device and its
antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter except in accordance with FCC multi-transmitter product
procedures.
Innovation, Science and Economic Development Canada Statement: CAN
ICES-003(B)/NSM-003(B)
Operation is subject to the following two conditions:
- This device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.
Innovation, Science and Economic Development Canada Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi- transmitter product procedures.
Antenna | Model | Gain |
---|---|---|
WiFi Internal | RFA-AP82TA-70B-84 | 2.6 |
WARNING:
This product can expose you to chemicals, including Bisphenol A (BPA), which
are known to the State of California to cause birth defects or other
reproductive harm. For more information, go to
www.P65Warning.ca.gov
FCC STATEMENT INSERT (US/CANADA)
CLIENT: Phyn
BRAND: Phyn
FILE NAME: Phyn_Packaging_FCC_Insert_mech_v3.ai
PROJECT TYPE: Packaging
DIMENSIONS: 77mm x 84 mm
CREATION DATE: 2019.05.30
CREATION AUTHOR: SW
PRINTER: NA
MODIFIED BY:| 2021/04/28
UPC CODE: printer to insert. Note that barcodes are shown for position only
unless otherwise noted
UPC NUMBER: X 22808 XXXXX X
USAGE TERMS: Unlimited, time and usage is granted globally and for all
product, leaves, and flavor inclusion illustrations. Usage includes but is not
limited to all product, merchandising and company related materials for the
stated product for all advertising and media usage. Images can be altered for
color and placement refinements.
• If digital files supplied do not match supplied PDF, contact the Enlisted
Design Production Department.
• For actual color intent, please refer to the current edition of The Pantone®
Formula Guide for color standards.
• Fonts provided are for output of this artwork only.|
---|---|---