GAMESIR X2 Pro-Xbox Mobile Gaming Controller User Manual

October 27, 2023
GameSir

GAMESIR X2 Pro-Xbox Mobile Gaming Controller

PACKAGE CONTENTS

  • GameSir-X2 Pro-Xbox *1
  • Carry Case *1
  • Concave Thumbstick Cap *2
  • Convex Thumbstick Cap *2
  • User Manual *1
  • Thank You & After-sale Service Card *1
  • GameSir Sticker *1
  • Certification *1

REQUIREMENTS

  • Android phone (Android 8.0 or above) with a Type-C port
  • With a length of 110-179 mm
  • OTG On*
    • Android phones such as Huawei, Xiaomi, Samsung and Google have been enabled OTG by default. For other phones, please refer to the requirements of respective phones.

DEVICE LAYOUT

GAMESIR-X2-Pro-Xbox-Mobile-Gaming-Controller-fig2 GAMESIR-X2-Pro-Xbox-Mobile-Gaming-Controller-fig3

INSTALL THE PHONE

GAMESIR-X2-Pro-Xbox-Mobile-Gaming-Controller-fig4

DETACH THE PHONE

GAMESIR-X2-Pro-Xbox-Mobile-Gaming-Controller-fig5

CHARGE THE PHONE THROUGH THE CONTROLLER

GAMESIR-X2-Pro-Xbox-Mobile-Gaming-Controller-fig6

Only some Android phones are supported pass-through charging. Not all Android phones are supported.

SWAP ABXY BUTTON POSITIONS

GAMESIR-X2-Pro-Xbox-Mobile-Gaming-Controller-fig7

BACK BUTTONS SETTINGS

  1. Set M1 / M2 button value: Press the View + Menu + M1 / M2 buttons simultaneously for 3s. When LED 1 & LED 2 flash simultaneously, tap the button you want to map to M1 / M2 button. LED 1 & LED 2 simultaneously flash twice rapidly and go out to indicate M1 / M2 button value is set.
  2. Cancel M1 / M2 button value: Press the View + Menu + M1 / M2 buttons simultaneously for 3s. When LED 1 & LED 2 flash simultaneously, tap M1 / M2 button. LED 1 & LED 2 simultaneously flash twice rapidly and go out to indicate M1 / M2 button value is canceled.

JOYSTICKS & TRIGGERS CALIBRATION

Press the View + LT buttons simultaneously for 3s until LED 1 & LED 2 quickly flash alternately, then release the key. Slowly rotate the joysticks at their maximum angles for 3 times. Then slowly press LT & RT to their maximum travel for 3 times. Finally, press LB+RB simultaneously. LED 1 & LED 2 stop flashing to indicate the calibration is over.

DOWNLOAD GAMESIR APP

Scan below QR code to download GameSir App. After the mobile phone is successfully connected to the controller, you can directly enter GameSir App and use functions such as controller test, button layout settings and firmware upgrade.

https://www.gamesir.hk/pages/ask-for-help
(CUSTOMER SERVICE)

Microsoft, Xbox, Xbox Game Pass, Xbox “Sphere” Design are trademarks of the Microsoft group of companies. All other trademarks are the property of their respective owners.
www.gamesir.hk

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GameSir User Manuals

Related Manuals