GAMESIRVX VX Adapter Game Adapter User Manual
- June 5, 2024
- GameSir
Table of Contents
- GAMESIRVX VX Adapter Game Adapter PACKAGE CONTENTS
- DEVICE LAYOUT
- CONFIGURATION TUTORIAL
- PAIR WITH COMPATIBLE USB PERIPHERAL
- UPDATE TUTORIAL
- MORE DESCRIPTIONS OF VX ADAPTER INDICATOR
- PLEASE READ THESE PRECAUTIONS CAREFULLY.
- COPYRIGHT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GAMESIRVX VX Adapter Game Adapter PACKAGE CONTENTS
- GameSir-VX Adapter *1
- User Manual *1
REQUIREMENTS
- PS5 console
- WiFi router
- PC (Win 7/10 or above) with a USB port
- Compatible USB peripherals: GameSir VX2 AimBox, GameSir VX2 AimSwitch, Official DualShock, Xbox One, Xbox One X/S, Xbox Series X/S, Xbox Elite Wireless Controller Series 2, Nintendo Switch Pro Controller, etc
DEVICE LAYOUT
CONFIGURATION TUTORIAL
PREPARATION
- Connect the PS5 console to your WiFi router through cable or WiFi.
- Log into your PSN account on the PS5 console.
- ensure the network is working well. Go to Settings > Network > Connection Status > Test Internet Connection on the PS5 console.
- Select Settings > System (Console) > Remote Play > Start Remote Play.
*For first-time use, VX Adapter needs to be set up on the PC (Win 7/10 or above). After successful setup, you can just plug and play every time if both the PSN account and WiFi are not changed.
DOWNLOAD VX ADAPTER CONFIGURATION FILE VIA PC
-
Go to https://www.gamesir.hk/pages/tutorial-vx-adapter, locate the Configuration File for VX Adapter, and download and unzip it.
-
Open the configuration file, then double-click VxAdapter.exe.
-
After opening VxAdapter.exe, it will be shown as below. (You can switch languages by clicking the buttons.)
-
Hold the pairing key when plugging VX Adapter to your PC’s USB port and release until VX Adapter’s indicator is solid white. Then wait driver installation. (If driver installation fails, please turn off your security software and retry.)
-
When it’s showed VxAdapter Found, it means that the driver is installed successfully. Click Configuration to enter the configuration interface
-
Configuration Steps
- Click “Set up your PSN account” to enter into a webpage, then enter the same PSN account and password you used to log into PS5 earlier in the Preparation process. After successful login with redirect displayed on the webpage, copy the full URL.
- After copying the full URL, click below ② and wait 1-2 minutes for the PSN ID to be displayed.
If the PSN ID is not displayed successfully, you can try to obtain the PSN ID manually with the below method.
-
Obtain PSN ID manually
(Use when VX Adapter fails to connect to the console in the case of automatically obtaining the PSN ID.)- Click PSN ID manually to enter into below webpage. Copy the selected URL below.
- enter the copied URL in the search bar to the webpage.
- Enter the same PSN account and password that you used to log into PS5 earlier in the Preparation process. After successful login with redirect displayed on the webpage, copy the full URL.
- return to VX Adapter configuration software, click below ② and wait 1-2 minutes for the PSN ID to be displayed.
- Enter WiFi account and password as required.
- Enter the 8-digit code from PS5 Settings > System > Remote Play > Enable Remote Play > Link Device.
- Click save.
PAIR WITH COMPATIBLE USB PERIPHERAL
-
Connect VX2 AimSwitch / VX2 AimBox / Compatible Controller to VX Adapter.
Connect VX2 AimSwitch to VX Adapter- Plug the USB-A port of VX2 AimSwitch’s receiver to the USB port of VX Adapter.
- Plug VX Adapter to the PS5 back USB port or a power adapter (5V 2A).
- Toggle the power switch of VX2 AimSwitch to and wait for the receiver’s indicator to turn solid blue and the connection status indicator to turn solid green
-
Connect VX2 AimBox to VX Adapter
-
Plug the USB-A port of VX2 AimBox to the USB port of VX Adapter.
-
Plug VX Adapter to the PS5 back USB port or a power adapter (5V 2A).
-
Connect Compatible Controller to VX Adapter
-
Use USB cable to connect the controller to VX Adapter.
-
Plug VX Adapter to the PS5 back USB port or a power adapter (5V 2A).
-
Press VX Adapter’s pairing key. The indicator is solid green to show remote play service is successfully connected. Meanwhile, the PS5 monitor shows “connected using Remote”. The configuration process is finished at this time.
INDICATOR | DESCRIPTION |
---|---|
Blinking blue | Connecting to WiFi router |
Blinking green | Connecting remote play service |
Solid green | Configuration finished |
UPDATE TUTORIAL
- Go to https://www.gamesir.hk/pages/tutorial-vx-adapter, locate Update File For VX Adapter and download it to your PC disk.
- Open VxAdapter.exe , then hold the pairing key when plugging VX Adapter into your PC’ s USB port. Don’t release until VX Adapter’s indicator is solid white. Click Upgrade in VxAdapter.exe to enter the upgrade interface.
- Click Select upgrade firmware, then choose the downloaded update.bin file and tap Upgrade.
Notes
- After successful configuration of VX Adapter, you can just plug and play every time if both the PSN account and WiFi are not changed.
- If connection fails, VX Adapter will reconnect automatically. If reconnection fails, please press the pairing key for a manual reconnection.
- When remote play has been enabled and you want to replug VX Adapter after unplugging it, please replug and use it after the monitor shows the remote play is disconnected.
- After successful configuration, VX Adapter can be plugged into any power supply service such as a power adapter and a portable power bank.
- Performance Comparison of PS5 wired and WiFi connection to Router:
MORE DESCRIPTIONS OF VX ADAPTER INDICATOR
MORE DESCRIPTIONS OF VX ADAPTER INDICATOR
INDICATOR| REASON| SOLUTION
Blinking blue 2 times| WiFi information not filled| Use configuration file to
reconfigure
Blinking green 2 times| PSN information not filled| Use configuration file to
reconfigure
Blinking blue & red alternately| WiFi connection failed| Press pairing key to
re-pair
Blinking blue & green alternately| Console not found| Press pairing key to re-
pair
Blinking green & red alternately| Console registration failed| Press pairing
key to re-pair
Blinking red, green & blue alternately| Console connection failed| Press
pairing key to re-pair
Blinking white| Console disconnected or other questions| Press pairing key to
re-pair
Solid green| Connected successfully|
PLEASE READ THESE PRECAUTIONS CAREFULLY.
- DO NOT insert fingers, rods or any other foreign objects to the fan’s exhaust opening to prevent any body damage or property damage.
- DO NOT keep the cooler on when your phone is not in use.
- CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
- DO NOT use the product near fire.
- DO NOT expose to direct sunlight or high temperatures.
- DO NOT leave the product in a humid or dusty environment.
- DO NOT impact the product or cause it to fall due to strong impact.
- DO NOT touch USB port directly or it might cause malfunctions.
- DO NOT strongly bend or pull cable parts.
- Use a soft, dry cloth while cleaning.
- DO NOT use chemicals such as gasoline or thinner.
- DO NOT disassemble, repair or modify.
- DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.
- DO NOT look directly at the optical light. It might damage your eyes.
- If you have any quality concerns or suggestions, please contact GameSir or your local distributor.
COPYRIGHT
© 2022 Guangzhou Chicken Run Network Technology Co., Ltd. All rights reserved.
The information contained in this manual is subject to change without notice.
GameSir and the GameSir logo are registered trademarks of Guangzhou Chicken
Run Network Technology Co., Ltd. Android and Google are trademarks of Google
LLC. Huawei is a trademark of Huawei Technologies Co., Ltd. Xiaomi is a
trademark of Xiaomi Inc. Samsung is a trademark of Samsung Electronics Co.,
Ltd. Xbox is a trademark of Microsoft Corporation. Switch is a trademark of
Nintendo Co., Ltd. All other trademarks, logos and brand names are the
property of their respective owners.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 o the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interferenc to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
- bigeyes.com/dl-list.html
- GameSir | The Global Leading Game Peripheral Brand – GameSir Official Store
- 小鸡手柄|Gamesir|盖世小鸡 - Gaming is Winning._小鸡手柄|Gamesir title_小鸡手柄|Gamesir|小鸡网
- Ask for Help | GameSir – GameSir Official Store
- Manuals-GameSir VX Adapter – GameSir Official Store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>