Soundcore Life P2 Mini Wireless Earbuds Manual: Controls & Pairing
- June 6, 2024
- Soundcore
Table of Contents
The Soundcore Life P2 Mini Wireless Earbuds are a compact and convenient way to enjoy your music or take calls on the go. This user manual provides detailed instructions on how to use and care for your earbuds, including charging, wearing, powering on/off, Bluetooth pairing, and controls. The earbuds come with five pairs of EarTips to help you find the most comfortable and secure fit. The manual also includes information on how to reset the earbuds if you experience any connectivity problems or function issues. With a battery life of up to 8 hours and a charging case that provides an additional 32 hours of playtime, these earbuds are perfect for long commutes or workouts. The Soundcore Life P2 Mini Wireless Earbuds are designed with a 10mm driver size and a frequency response of 20 Hz – 20 kHz, ensuring that you get high- quality sound with well-balanced bass and clear mid-frequencies. With an IPX5 waterproof rating, these earbuds are resistant to sweat and rain, making them ideal for outdoor activities. Whether you’re listening to music or taking calls, the Soundcore Life P2 Mini Wireless Earbuds provide a seamless and enjoyable experience.
soundcore Life P2 Mini Wireless Earbuds
Charging
- Fully dry off the earbuds and the USB port before charging.
- Use a certified USB-C charging cable and charger to prevent any damage.
- Fully charge both the earbuds and the charging case before the first use.
- Place the earbuds in the charging case and close it.
- Connect the charging case to the power supply by using a USB-C charging cable.
- The LED indicator on the charging case indicates the charging status.
Wearing
- Choose the EarTips that fit your ears best.
- Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.
Your earbuds come with 5 pairs of EarTips, among which Medium-sized are pre-
installed.
Powering On/Off
- Open the charging case, the earbuds will automatically power on.
- To power off, place the earbuds in the charging case and close it.
- The earbuds will automatically power off after 10 minutes if no device is connected.
- To manually power on, press and hold the touchpad on earbuds for 3 seconds.
- To manually power off, press and hold the touchpad on earbuds for 8 seconds.
Bluetooth Pairing
- Tear off the insulation sticker on the earbuds before first use.
- Place the earbuds in the charging case and close it.
- Open the charging case (no need to take out the earbuds), the earbuds will automatically enter Bluetooth pairing mode. The 3 LED indicators on the charging case will flash white in sequence continuously.
- Select “Soundcore Life P2 Mini” on your device’s Bluetooth list to connect. When successfully connected, the 3 LED indicators will turn white for 3 seconds and then turn off.
- Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the charging case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
- Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
- Mono mode: When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the chaging case and closing it.
- When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
- When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.
Controls
Stereo Mode MUSIC
| Play/Pause | Tap twice (R/L) |
|---|---|
| Next track | Press and hold for 2 seconds (R) |
| Previous track | Press and hold for 2 seconds (L) |
Switch EQ in sequence: Signature (Default) / Bass Booster / Podcast| Tap three times (R)
Quickly tap the touch button on the right earbud three times to cycle through Soundcore Signature (default), Bass Booster, and Podcast modes. You will hear a tone for each successful switch.
- Soundcore Signature: Default EQ mode with well-balanced sound.
- Bass Booster: Enhances low-frequency sound.
- Podcast: Focus on mid-frequency for clearer voices.
CALL
| Answer a call | Tap twice (R/L) |
|---|---|
| End/Reject a call | Press and hold for 2 seconds (R/L) |
MIC
- Activate Siri or other voice assistant software
- Press three times (L)
Mono Mode
| Play/Pause | Tap twice |
|---|---|
| Next track | Press and hold for 2 seconds |
| Answer a call | Tap twice |
| End/Reject a call | Press and hold for 2 seconds |
| Activate Siri or other voice assistant software | Tap three times |
Reset
You might need to reset the earbuds if you experience any connectivity problems or function issues.
- Place the earbuds in the charging case and make sure they are being charged.
- Press and hold the button on the case for 10 seconds until the 3 LED indicators flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful and your earbuds can be connected normally.
Specifications
Specifications are subject to change without notice.
| Input | 5V ⎓ 0.6A |
|---|---|
| Rated output power | 5 mW |
| Battery capacity | 60 mAh x 2 (earbuds); 540 mAh (charging case) |
| Charging time | 2 hours |
| Playtime (Varies by volume level and content) | Up to 8 hours (Total 32 hours |
with the charging case)
Driver size| 10 mm
Frequency response| 20 Hz – 20 kHz
Impedance| 16 Ω
Waterproof level (Earbuds)| IPX5
Bluetooth version| 5.2
Bluetooth range| 10 m / 33 ft
FAQS
How do I charge the Soundcore Life P2 Mini Wireless Earbuds?
Fully dry off the earbuds and the USB port before charging. Use a certified USB-C charging cable and charger to prevent any damage. Fully charge both the earbuds and the charging case before the first use. Place the earbuds in the charging case and close it. Connect the charging case to the power supply by using a USB-C charging cable. The LED indicator on the charging case indicates the charging status.
How do I wear the Soundcore Life P2 Mini Wireless Earbuds?
Choose the EarTips that fit your ears best. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.
How do I power on/off the Soundcore Life P2 Mini Wireless Earbuds?
Open the charging case, the earbuds will automatically power on. To power off, place the earbuds in the charging case and close it. The earbuds will automatically power off after 10 minutes if no device is connected. To manually power on, press and hold the touchpad on earbuds for 3 seconds. To manually power off, press and hold the touchpad on earbuds for 8 seconds.
How do I pair my Soundcore Life P2 Mini Wireless Earbuds?
Tear off the insulation sticker on the earbuds before first use. Place the earbuds in the charging case and close it. Open the charging case (no need to take out the earbuds), the earbuds will automatically enter Bluetooth pairing mode. The 3 LED indicators on the charging case will flash white in sequence continuously. Select “Soundcore Life P2 Mini” on your device’s Bluetooth list to connect. When successfully connected, the 3 LED indicators will turn white for 3 seconds and then turn off.
How do I switch between stereo and mono mode on my Soundcore Life P2 Mini Wireless Earbuds?
When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the charging case and closing it. When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one. When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.
How do I control my music and calls on my Soundcore Life P2 Mini Wireless Earbuds?
In stereo mode, tap twice on either earbud to play/pause, press and hold for 2 seconds to skip to the next or previous track, and tap three times on the right earbud to switch EQ modes. In call mode, tap twice on either earbud to answer a call, press and hold for 2 seconds to end/reject a call, and press three times on the left earbud to activate Siri or other voice assistant software. In mono mode, tap twice to play/pause, press and hold for 2 seconds to skip to the next track, tap twice to answer a call, and press and hold for 2 seconds to end/reject a call. Press three times on the left earbud to activate Siri or other voice assistant software.
How do I reset my Soundcore Life P2 Mini Wireless Earbuds?
Place the earbuds in the charging case and make sure they are being charged. Press and hold the button on the case for 10 seconds until the 3 LED indicators flash white 3 times and then flash white in sequence continuously. This confirms that the reset was successful and your earbuds can be connected normally.
What are the specifications of the Soundcore Life P2 Mini Wireless Earbuds?
The input is 5V ⎓ 0.6A, rated output power is 5 mW, battery capacity is 60 mAh x 2 (earbuds); 540 mAh (charging case), charging time is 2 hours, playtime varies by volume level and content and can last up to 8 hours (total 32 hours with the charging case), driver size is 10 mm, frequency response is 20 Hz – 20 kHz, impedance is 16 Ω, waterproof level (Earbuds) is IPX5, Bluetooth version is 5.2, and Bluetooth range is 10 m / 33 ft.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>