SOLTECH BROADWAY Billboard Lights 10W LED Lights Installation Guide
- June 6, 2024
- SOLTECH
Table of Contents
SOLTECH BROADWAY Billboard Lights 10W LED Lights
SOLTECH Designs and Manufactures Advanced, Solar-Powered
LED Technology.
Introduction
Thank you for purchasing BROADWAY Urban Lighting Products.
Important
Please read these instructions before installation to ensure optimum results
and longevity of your lights. The solar panel should be charged in full
sunlight for 8 to 9 hours before initial first use to provide optimum results.
Features
- Easy Installation—No electrical wiring is required with its integrated design
- Turns on automatically at night and off during the day
- The lights include an ON / OFF switch and built in battery
- Battery can support 2-3 nights with cloudy days once fully charged
- Intelligent power saving mode increases lighting x1.5 times
- IP65 water and dust resistance
How The Solar Panel Works
- During the day, the solar panel converts sunlight into electricity to charge the battery. At night, the lights turn ON automatically using the electricity stored in the battery. The performance of the solar light dependents on the location of the solar panel and weather conditions.
- Install the solar panel in a sunny location to ensure it receives 6–8 hours of sunlight each day. Reduced sunlight will reduce continuous working hours at night.
Please Note
During continuous rainy or cloudy days, run time may be reduced as the battery
will not be fully charged.
Specification
Specifications| B R O A D W A Y 10W|
B R O A D W A Y 20W
---|---|---
LE D Nomina l P o w er| 10W| 20W
S ola r P anel| 5.5V 8W polycrystalline| 5.5V 17W
polycrystalline
L i thiu m Io n B a t t e r
y| 3.7V 17.6AH| 3.7V 35.2AH
C C T| 4,000K, 5,000K| 4,000K, 5,000K
L ume n Output@5000K| 1,000| 2,000
CRI| > 70| > 70
LE D Chip| OSRAM| OSRAM
E PA| 1.05| 2.1
B ea m A ngle| 120°| 120°
W a t erp r oo f R a t e| IP65|
IP65
C as ting| PC & Aluminum| PC & Aluminum
E f ficienc y@5000K| 100 lm/W| 100 lm/W
*** Cha r gin g Time| 8–10 hrs (1000W/m2)| 8–10 hrs
(1000W/m2)
R u n Tim e (@ F ul l P o w
er)| 2–3 Days| 2–3 Days
Ope r atio n Mode**| First 4 hours 100% brightness, 25%
brightness till dawn
| First 4 hours 100% brightness, 25%
brightness till dawn
Ope r atin g T empe r atu r e|
-4 °F to 149 °F| -4 °F to 149 °F
Cha r gin g T empe r atu r e|
32 °F to 113°F| 32 °F to 113°F
- The temperature can impact the battery’s charging and normal operation.
- The solar charge time data is base on 77 degree F ambient temperature with the panel pointed directly at the solar radiation. The standard radiation value is 1000W/m2.
Installation
Wall Mount
- Usually more used for standard Billboards alongside express ways, the Triangle Mount is versatile and can be installed in more traditional signage, this can also be used for commercial establishments and buildings.
- This method only be used when installing BROADWAY 10W.
Long Arm Mount
BROADWAY 10W needs two Long Arm Mounts. If you install BROADWAY 20W, you need
three Long Arm Mounts.
Long Arm Mount accessories not included in standard packaging. Please advise
your SOLTECH sales representative if needed.
For thinner billboards, the Long Arm mount uses a tighten-to-grip system that
securely places the Broadway into place. Perfect for temporary signs that need
illumination for a shorter period of time.
Luminous Distribution
Warranty
FOCUS is covered by a 3 year limited warranty. FOCUS urban light warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 3 years from date of purchase. To obtain warranty service please contact your local distributor or sales rep for further instruction.
SOLTECH Designs and Manufactures Advanced, Solar-Powered LED Technology.
1460 Park Avenue.
Emeryville, CA 94608 USA
www.soltechlighting.com
SOLTECH LLC reserves the right to update all product data sheets at any time.
Consult SOLTECH marketing specialists for publication updates at
hello@soltechlighting.com