BLACK DECKER BH1607 Portable Desktop Ceramic Heater Instruction Manual

BLACK DECKER BH1607 Portable Desktop Ceramic Heater

SPECIFICATIONS

• Voltage: 120V, 60Hz
• Power Consumption: 1500W
• Unit Size (WxDxH): 7.6 x 7.6 x 10.2

PRODUCT INFORMATION
The BLACK+DECKER Portable Desktop Ceramic Heater is designed to provide efficient heating in a compact size. With a power consumption of 1500W, this ceramic heater can quickly warm up your space. It features multiple settings including high and low power modes, a timer function, and adjustable fan speed for personalized comfort.

PRODUCT USAGE INSTRUCTIONS

Safety Information
Before using the heater, read and understand all safety instructions provided in the manual to prevent any hazards or injuries.

Place the heater on a flat, stable surface away from any flammable materials. Ensure there is proper ventilation around the unit.

• Power Settings
  Use the power switch to select between high and low heating modes based on your comfort level.

• Fimer Function
  Set the timer to automatically turn off the heater after a specified duration, providing convenience and energy savings.

• Fan Speed
  Adjust the fan speed to control the airflow and distribute heat evenly in the room.

FAQ
Q: Can I use an extension cord with this heater?
A: No, always plug the heater directly into a wall outlet to prevent overheating and ensure safety.

PORTABLE DESKTOP CERAMIC HEATER

INSTRUCTION MANUAL
CATALOG NUMBER
BH1607

Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER purchase, go to www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call 844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. – Fri. to speak with an agent. Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

SPECIFICATIONS

• Voltage: 120V, 60Hz
• Power Consumption: 1500W
• Unit Size (WxDxH): 7.6” x 7.6” x 10.2”

PRODUCT REGISTRATION

Thank you for purchasing our BLACK+DECKER product. This easy-to-use manual will guide you in getting the best use of your heater.
Remember to record the model and serial numbers. They are on a label on the rear.
Staple your receipt to your manual.

You will need it to obtain warranty service.

• Model number
• Serial number
• Date of purchase

SAFETY INFORMATION

• DANGER – Immediate hazards which WILL result in severe personal injury or death
• WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death
• CAUTION – Hazards or unsafe practices which COULD result in minor personal injury

IMPORTANT SAFETY INSTRUCTIONS

WARNING
When using electrical appliances, basic safety precautions should be followed, including the following

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using this heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least feet (0.9m) from the front of the heater and keep them away from the sides and rear.
3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
4. Always unplug heater when not in use.
5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
6. Do not use outdoors.
7. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into bathtub or other water container.
8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
9. To disconnect heater, first turn controls to off, then remove plug from outlet.
10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
12. A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.
13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
14. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
15. This heater draws 12.5 amps during operation. To prevent overloading a circuit, plug it into a dedicated power outlet.
16. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
17. Don’t leave the heater on unattended.

SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY

ELECTRICAL REQUIREMENTS

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

• WARNING: Do not attempt to modify the plug in any way.
• NOTE: Neither BLACK+DECKER nor the dealer can accept any liability for damage to the product or personal injury resulting from failure to observe the electrical connection procedures.
• WARNING: To reduce the risk of electric shock, do not use with an extension cord.

WARNING – RISK OF FIRE
It is important the plug fits tightly into the wall outlet.
If the plug does not fit securely and appears loose, it should not be used. Have a licensed electrician replace the receptacle.

SAFETY INFORMATION

OVERHEAT SAFETY FEATURE
The heater is equipped with a overheat safety feature. When the Heater’s internal components reach certain temperature that could cause overheating and the unit will automatically shut off. The heater can be reset by unplugging it from the wall outlet. After it has cooled down [approximately 30 minutes], plug the unit back in and turn it back on. In certain cases the over heating could cause possible fire, the heater will automatically shut off. If this should occur, please contact our customer Satisfaction center at 844-299-0879.

WARNING
It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.

TIP-OVER SAFETY FEATURE
This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To continue operation, turn heater back on.

SET UP & USE

PARTS & FEATURES

OPERATING INSTRUCTIONS

Place the heater on a firm, level surface and plug the unit directly into a 120V AC electrical outlet.
Turning the Heater ON/OFF: Turn ON the power switch, located on the back of the unit, and then press button. Press once to On position the heater will start, press again to OFF (00), so the heater goes to standby mode. To Shut the unit completely Power off the switch located on back of the unit.
NOTE: The unit will default to previously set temperatures when it is turned ON after  first time use.

Selecting the heat level: Once the unit is On, press the Mode button.

• Press once to select Fan mode and a LED light next to the Fan feature is illuminated on the control panel to show the unit is in fan mode.
• Press twice to select Low heat setting (750 Watts), and a LED light next to the Low feature is illuminated on the control panel to show the unit is operating at Low Heat.
• Press thrice to select High heat setting (1500 Watts), and a LED light next to the High feature is illuminated on the control panel to show the unit is operating at High Heat.

Selecting the Heat Level Manually
You can select the heat level manually by setting the Thermostat temperature from 59 degrees to 99 degrees (set temperature will display on LED panel), by pressing the UP and Down buttons located on the control Panel.
Note: if the set temperature is lower the prevailing room temperature the heater will
stop automatically and will begin to blow cool air. To constantly run the heater without thermostat setting just select high or low heat by pressing mode button.

Setting the Timer
You can set the timer on the heater to select the number of hours you want the unit to operate. Press the Timer button once and a LED light blinks next to the timer feature on the control panel, then press the UP and Down buttons to adjust the shut Off timer between 1 to12 Hrs.

Remote Control:
The Heater can be completely controlled by the remote. One CR 2025 3V battery is needed (Battery not included).

WARNING : Danger of explosion if battery is incorrectly replaced.
WARNING : WARNING: DO NOT INGEST BATTERY;

CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body seek immediate medical attention.
• If the coin cell battery contents come into contact with the skin, immediately wash area with mild soap and water. If coin cell battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of an organic solvent and lithium salts.
• Do not incinerate or dispose of tool together with household waste material!Tool that has reached the end of its life must be collected separately and returned to an environmentally compatible recycling facility.

Installing the Battery

1. Using a small Philips Head screwdriver, remove the screw by turning it counter-clockwise until it releases from the remote.
2. Push the button at the base of the battery cover to release the cover. Pull out the battery cover as shown in the diagram.
3. Insert the battery making sure the “+” side is facing up.
4. Once the battery is installed, push the battery cover closed.
5. Again, using the small Philips Head screwdriver, add the screw back by turning clockwise until it is locked in place.

Remote Control Operation

1. Press Power button to turn the unit On and OFF (Standby mode)
2. Press Lock button to lock all the controls on the control Panel
3. Press Timer Button to set the Shut off timer from 1 to 12 hours.
4. Press Mode Button 1 to 3 times to select Fan, Low Heat (750W) and High Heat (1500W) mode.
5. Press UP and Down buttons to choose the desired thermostat setting for 59 degrees to 99 degrees.
6. Press the Mute button to turn off the sound on the unit when the buttons are pressed.

CARE & CLEANING

MAINTENANCE
WARNING: Turn power off before cleaning.

1. Unplug the unit and let it cool completely.

2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
   CAUTION: DO NOT let liquid enter the heater.

3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.

4. DO NOT immerse the heater in water.

5. Wait until the unit is completely dry before use.

STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit.

TROUBLESHOOTING & WARRANTY

BEFORE YOU CALL FOR SERVICE
IF THE HEATER/FAN FAILS TO OPERATE:

• Check to make sure that the heater/fan is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds and plug it in again securely.
• Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be operating properly, test the outlet with another appliance.
• Check if electricity to the main power switch in the back of the unit appears to be working.
• Make sure the heater is in the upright position.

NOTE: For the heater to function properly, the desired temperature on the heater must be set a few degrees higher than the temperature in the room. If the unit seems to not be heating properly, increase the desired temperature on the heater to fully engage the heating elements.

IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE HEATER/FAN YOURSELF.

CUSTOMER SERVICE

IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the BLACK+DECKER Customer Satisfaction Center at 844-299-0879 or service@equitybrands.com
DATED PROOF OF PURCHASE, MODEL # AND SERIAL # REQUIRED FOR WARRANTY SERVICE

LIMITED WARRANTY
Any repair, replacement, or warranty service, and all questions about this product should be directed to BLACK+DECKER at 844-299-0879 from the USA or Puerto Rico. W. Appliance Co. warrants to the original purchaser that the product will be free from defects in material, parts and workmanship for the period designated for this product. The warranty commences the day the product is purchased and covers up to a period of 1 year (12 months) for labor/1 year (12 months) for parts (manufacturing defects only).
BLACK+DECKER agrees that it will, at its option, replace the defective product with either a new or remanufactured unit equivalent to your original purchase during the warranty period.

Exclusions: This warranty does not apply if any of the following conditions exist:

1. The appearance or exterior of the product has been damaged or defaced, or altered or modified in either design or construction.
2. The product’s original serial number has been altered or removed, or cannot be readily determined.
3. Damage is due to a power line surge, or connection to an improper voltage source.
4. Damage is due to general misuse, accidents, or acts of God.
5. Repair attempts were made by unauthorized service providers; parts other than genuine parts were used; or parts were obtained from unauthorized service companies.
6. The product was transferred from the original owner.
7. The product was purchased as refurbished, like new, or second-hand, or with “As-Is” or “Final Sale” terms.
8. The product was used in a commercial or rental setting.
9. The product was used in settings other than ordinary households or used other than in accordance with the provided instructions.
10. Damage is due to improper installation.

The following costs are not covered under this warranty:

1. Transportation and shipping costs associated with the replacement of the unit.
2. Service calls to instruct you how to use your product.
3. Service calls to repair or replace the house fuse, reset a circuit breaker, or correct the wiring in the house.
4. Service calls required due to improper installation.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER; BLACK+DECKER SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THE WARRANTY.
Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. This warranty gives you specific

legal rights and you may also have other rights which vary from state to state. Obtaining Service: To obtain service, product literature, supplies or accessories please call
844-299-0879 to create a ticket for exchange/repair. Please make sure to provide the date of purchase, model number and a brief description of the problem. Our customer service representative
will contact you or send detailed return instructions.

BLACK+DECKER does not warrant that the appliance will work properly in all environmental conditions, and makes no warranty and representation, either implied or expressed, with respect
to the quality, performance, merchantability, or fitness for a particular purpose other than the purpose identified within this user’s manual. BLACK+DECKER has made every effort to ensure that this user’s manual is accurate and disclaims liability for any inaccuracies or omissions that may have occurred. Information in this user’s manual is subject to change without notice and does not represent a commitment on the part of BLACK+DECKER. BLACK+DECKER reserves the right to make improvements to this user’s manual and/or to the products described in this user’s manual at any time without notice. If you find information in this manual that is incorrect, misleading, or incomplete, please contact us at 844-

• 299-0879.
• W Appliance Co.
• 1356 Broadway
• New York, NY 10018

BLACK & DECKER, BLACK+DECKER, los logos BLACK & DECKER y
BLACK + DECKER y los nombres de productos y el esquema de color naranja y negro son marcas comerciales de The Black & Decker Corporation, utilizadas bajo licencia.Todos los derechos reservados.
El producto en esta caja puede diferir levemente de la imagen. No afecta

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>