Guangdong Yuxing Technoligy Industry 13106 Building Block Instruction Manual
- June 5, 2024
- Guangdong Yuxing Technoligy Industry
Table of Contents
Guangdong Yuxing Technology Industry 13106 Building Block
Product Summary
Smart creative module.
Product Description
Remate Control
Method Of Operation
On/Off
- Turn on the power switch key and turn on the indicator when stating. Press the power switch for more than 3 seconds. The indicator lights out and the main module closes.
- When the main module is successfully connected with the remote controller, the indicator lights on.
- The remote control A key controls the main module A port. the remote control B key controls the main module B port, and so on.
- When the E-key of the remote controller is pressed, the B-key of the remote controller fails. and then the A-key controls the A-port and B-port. When the F-key of the remote controller is pressed, the C-key of the remote controller fails, and then the A-key controls the A-port. B-port and C-port.
Remote Control
Operation
- Remote control operation installs the battery before using it the indicator light will flash. then the indicator will light Long bright (AA Battery 2)
- Direction button control Each power hole
- Switch the direction of power hole control. For example, when the direction control key of A power hole is pressed at the same time when the prompt lamp flashes down, the switch is successful.
Link Operation
- First, turn on the power then install the battery. At this time, the remote control light is Long bright, and connected.
- if the power is not turned on for a long time, repeat the installation of the remote battery connection.
FCC Warning Statement
Changes or modifications that did not express y approval by the party responsible for compliance could void the. user’s authority to operate new equipment. ns equipment seen test and Toun to limits are designed to provide reasonable protect I on against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, it is not common i cations. However, there is no guarantee that interference will not occur in a particular installation i. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equ pment oft and on, the user 1s encouraged to try to correct tHe interterence Dy one or more of the towns measures
- Reorient or relocate the receIVing antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver 1s connected.
- Consult the dealer or an experienced radio/TV technician for help. his devIce compies with part 15 or the F Rules. Operation 1s subject to the following two conditions
- 1 his device may not cause harmful interterence, and (2this device must accept any interference received, including interference that may cause undesired operation.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interterence, and
- This device must accept any interterence received, Including interterence that may cause undesired operation.
Download and install
APP Operational Instructions
Using app control, it can connect up to three modules at the same time. Before opening the app connection. you want to Connect multiple modules are opened, and the mode of module flash is the same. All the lights flash out. Module boot-up. default module is module one; after boot-up. quickly press two power supplies. the lamp becomes two. Secondary flash. indicating module is defined as module 2. Press the power button three times quickly and the lamp becomes the last one. Flash, the presentation module is defined as module three. After using the app connection, you can go right through the app interface The module switch button is in the upper corner.
Precautions Smart creative module is not removable and must not subject the product to mechanical shock: Smart creative module contains batteries, away from heat sources, fire sources, and locations above 60 °C: Smart creative module cannot be charged for a long time to avoid danger: The USB charging cable is an electronic component and cannot be used for play: This product contains small parts and is prohibited for use by children under the age of three to avoid the risk of suffocation.
*The remote control function keys vary with the product series.
Documents / Resources
|
Guangdong Yuxing Technoligy Industry 13106 Building
Block
[pdf] Instruction Manual
13106, 2A59K-13106, 2A59K13106, 13106 Building Block, Building Block
---|---