Soundcore Liberty 3 Pro Noise Cancelling Earbuds True Wireless Earbuds User Guide
- June 6, 2024
- Soundcore
Table of Contents
Soundcore Liberty 3 Pro
Quick Start Guide
For FAQs and more information, please visit: soundcore.com/support
SUPPORT
For FAQs, detailed user manuals, and more information, please visit www.soundcore.com/support
APP
Download the Soundcore app to create your personal HearlD profile, adjust the equalizer, customize controls, switch ambient sound modes, update firmware, and explore more.
WEARING
Choose the EarTips and EarWings that fit your ears best. Twist the earbuds until the EarWings are wedged against the ridge of your ears.
CHARGING
Fully dry off the earbuds and the USB-C charging port before charging.
Use an original or a certified USB-C charging cable to prevent any damage.
For wireless charging, position the charging case at the center of your
wireless charger.
POWERING ON/OFF
Open the charging case, the earbuds will automatically power on.
To power off, place the earbuds in the charging case and close it. To manually
power on, wear both earbuds, then press and hold the touchpad on both earbuds
for 3 seconds.
AUTOMATIC PAIRING
Open the charging case, the earbuds will automatically enter Bluetooth pairing
mode.
Select “Soundcore Liberty 3 Pro” on your device’s Bluetooth list to
connect.
MANUAL PAIRING
Place the earbuds in the charging case and leave the case open, then press and hold the button on the charging case for 3 seconds until the LED indicators flash white.
CONTROLS
x2: Tap twice
1s: Press and hold for 1 second
2s: Press and hold for 2 seconds
AMBIENT SOUND
You can switch HearlD ANC mode or transparency mode to normal mode in the Soundcore app.
- HearlD ANC: Take the ear canal test and tailor your noise cancellation experience.
- Transparency: Stay aware of your surroundings while listening to music.
LDAC
Use devices powered by Android 8.0 or later to experience LDAC quality sound.
You can enable or disable LDAC using the Soundcore app.
WEARING DETECTION
The playback will automatically pause when removing either earbud and will
resume when wearing it again.
Wear either earbud to automatically answer an incoming call.
MULTIPOINT
The earbuds can connect with two Bluetooth devices at the same time.
To pair with another device, wear the earbuds, then press and hold the
touchpad on both earbuds for 5 seconds simultaneously.
RESET
Reset if the earbuds cannot properly pair with each other or same time. with
other devices.
Delete the pairing history from your Bluetooth device first.
Place the earbuds into the charging case and leave the case open. Press and
hold the button on the case for 10 seconds until the LED indicators rapidly
flash white 3 times.
LED LIGHT GUIDE
Steady white
Flashing white
Breathing white
Light off
Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.
service@soundcore.com
support.mea@soundcore.com (For Middle East
and Africa Only)
+1 (800) 988 7973 (US) Mon – Fri 6:15 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon – Fri 6:00 -17:00 Sat – Sun 6:00 – 14:00
Input: 5V 0.5A
Fast charging: 15-minute charging for 3-hour playtime
Playtime (varies by volume level and contents): Up to 8 hours (Up to 32
hours with the charging case)
Anker Innovations Limited
Room1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
ANKER TECHNOLOGY (UK) LTD
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Model: A3952, A3952L, A3952R 51005003005 V1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>