meitrack T633L 4G Truck GPS Tracker User Guide

4G Truck GPS Tracker T633L

User Guide

Change History

2021-04-02
Subproject| User Guide| Total Pages| 16
Version| V1.3| Confidential| External Documentation

1. Copyright and Disclaimer

Copyright © 2021 MEITRACK. All rights reserved.
meitrack and are trademarks that belong to Meitrack Group.

The user manual may be changed without notice.
Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.

Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality to use the product or documentation.

2 Product Introduction

2.1 Product Overview
The T633L is a brand new 4G vehicle tracker with multiple RS232 and RS485 interfaces. This unit can connect to multiple accessories: RFID card reader, camera and LED Nixie Tube Display. At the same time, the T633L has a CAN interface, which support to monitor the CANBUS data of the vehicle. In addition, it supports driving behavior analysis, fuel level monitoring and temperature monitoring and its performance has been significantly improved.

2.2 Product Functions

2.2.1 Position Tracking

• GPS + LBS positioning
• Real-time location query
• Track by time interval
• Track by distance
• Cornering report
• Track by mobile phone

2.2.2 Anti-Theft

• SOS alert
• GPS antenna cut-off alert
• External power supply cut-off alert
• GPS blind spot alert
• Remote vehicle fuel/power cut-off
• Engine or vehicle door status alert
• Towing alert
• Geo-fence alert

2.2.3 Monitoring

• Harsh acceleration and braking detection
• Idling detection
• Fatigue driving reminder and monitoring
• Speeding reminder and monitoring
• Driver authorization detection
• Fuel level monitoring
• Temperature monitoring
• Vehicle CANBUS data monitoring
• Harsh cornering detection
• Impact detection
• Rollover detection

2.2.4 Other Functions

• SMS/GPRS (TCP/UDP) communication (Meitrack protocol)
• Built-in 8 MB buffer for recording driving routes (Store 4,096 GPRS cache records, 64 SMS cache records, and 65,536 GPS logs)
• Mileage report
• Low power alert for internal battery
• Build-in 3-axis accelerometer
• Over-the-Air (OTA) update

2.2.5 Functions of Optional Accessories

2.3 Product Features
2.3.1 Analysis of driver driving behavior
The analysis of driving behavior includes Idle Overtime detection, Fatigue Driving detection, Overspeed detection, Harsh Braking detection, Harsh Acceleration detection and Harsh Cornering detection, etc

Idle Overtime detection: If the speed is less than 5km/h for 180 seconds, the alarm will be activated, parameters can be modified by the B14 command or Meitrack Manager.
Fatigue Driving detection: If the vehicle has been driving for 240 minutes, the fatigue driving alarm will be activated, parameters can be modified by the B15 command or Meitrack Manager.
Overspeed detection: Disabled by default, parameters can be modified by the B07 command or Meitrack Manager.

Harsh Braking, Harsh Acceleration and Harsh Cornering detection: the alert results vary according to the device installation, vehicle model, vehicle weight, and driving behaviors. After the device has been installed properly, you can use the BBD command,BC6 command and Meitrack Manager software to adjust the harsh acceleration and braking alert values.

2.3.2 Emergency Alarm Detection

SOS Emergency Alarm: After the SOS button is pressed, the SOS alarm alarm will be triggered
Vehicle Impact Detection Emergency Alarm: The alert results vary according to the device installation, vehicle model and vehicle weigh. After the device has been installed properly, you can use the CB4 command and Meitrack Manager software to adjust the Impact Detection alert values.

Vehicle Rollover Detection Emergency Alarm: When the rollover Angle is greater than 45° and lasts for 10 seconds, there will be a Rollover Alarm. The CC7 command can be used to calibrate the horizontal plane of the vehicle

2.3.3 Maximize I/O flexibility
T633L Offer outstanding configuration flexibility to cater to a wide variety of requirements and support at most 9 digital inputs, 8 outputs, 4 AD ports:.

2.3.4 Maximize Peripheral Interface

T633L supports 2 RS232 peripheral extension interfaces and 4 RS485 peripheral extension interfaces

All above are the peripheral that T633L already supported. If necessary, Meitrack is capable of customizing any peripherals like cameras, ultrasonic fuel sensor, LED display connected to T633L as long as they support RS232/RS485.

2.3.5 CAN Interface
The device can read CAN bus data of a vehicle that supports the FMS protocol.
The following data can be read: vehicle speed, vehicle control status, accelerator pedal position (%), total fuel consumption, engine rotational speed, total engine run time, total mileage, engine coolant temperature, fuel level, engine torque, ambient temperature, torque at current speed, fuel consumption rate, axle weight, service distance, and instantaneous fuel consumption.
Note:

1. To obtain the preceding data, the vehicle must support the FMS protocol.
2. Install the device based on vehicle types. Connect vehicle’s CANH and CANL wires to tracker’s CANH and CANL connectors respectively.

2.4 Specifications

2.5 T633L and Accessories
T633L and standard accessories:

• T633L tracker
• External 4G antenna
• External GPS antenna
• I/O cable with an SOS button (2 meters)
• CD download card
• USB cable
• CANBUS convertor cable

Optional accessories:

• iButton
• Relay (12 V/24 V)
• A53 fuel level sensor (voltage sensor)
• A52 digital temperature sensor
• RFID reader
• Buzzer
• Camera
• A81 LED Nixie Tube Display
• Speaker and microphone

2.6 About the T633L
2.6.1 Appearance

2.6.2 LED Indicator
Press and hold down the power button for 3–5 seconds to start the device.

2.6.3 I/O Cable
The I/O cable is a 12-pin cable, including the power, analog input, digital temperature sensor input, and negative/positive input and output interfaces.

3. First Use

3.1 Installing the SIM Card

1. Loosen the screws, and remove the front cover of the device.
2. Insert the SIM card into the card slot with its gold-plated contacts facing towards the Printed Circuit Board (PCB).
3. Close the cover, and tighten the screws.

Note:

• Power off the device before installing the SIM card.
• Ensure that the SIM card has sufficient balance.
• Ensure that the phone card PIN lock has been closed properly.
• Ensure that the SIM card in the device has subscribed the caller ID service if you want to use your authorized phone number to call the device.

3.2 Configuring Device Parameters by Meitrack Manager
This section describes how to use Meitrack Manager (version 6.0.2.4 or later) to configure the device on a computer.

Procedure:

1. Install the USB driver and Meitrack Manager.
2. Connect the device to a computer by using the USB cable.
3. Run Meitrack Manager, then the following dialog box will appear:

Turn on the device, then Meitrack Manager will detect the device model automatically and the parameter page will appear accordingly.
For details about Meitrack Manager, see the MEITRACK Manager User Guide.

3.3 Installing GPS and GSM Antennas
Connect the GSM antenna to the connector which is labeled “GSM”. The GSM antenna is non-directional, so you can hide it in any place of a vehicle.
Connect the GPS antenna to the connector which is labeled “GPS”. It is recommended that the antenna is facing up to the sky and the antenna side with words is downwards. Secure the antenna by using double sided tapes.

Note: Do not install the GPS antenna at a metal covered place.

3.4 Device Connection Diagram

3.5 Tracking by Mobile Phone
Call or send the 0000,A00 command by SMS to the device’s SIM card number. The device will reply to an SMS with a map link.

Click the SMS link. The device’s location will be displayed on Google Maps on your mobile phone.

Note: Ensure that the device’s SIM card number has subscribed the caller ID service. Otherwise, the tracking function by mobile phone will be unavailable.

SMS example:
Now, 061314 10:36,V,26,0Km/h,96%, http://maps.meigps.com/?lat=22.513781&lng=114.057183
The following table describes the SMS format:

4. MS03 Tracking System

Visit http://ms03.trackingmate.com, enter the user name and password, and log in to the MS03. (Purchase the login account from your provider.)
For more information about how to add a tracker, see the MEITRACK GPS Tracking System MS03 User Guide (chapter 4 “Getting Started”).
The MS03 supports the following functions:

•  Track by time interval or distance.
• Query historical trips.
• Set polygonal geo-fences.
• Bind driver and vehicle information.
• View various reports.
• Send commands in batches.
• Support OTA updates.

For details, see the MEITRACK GPS Tracking System MS03 User Guide.
If you have any questions, do not hesitate to email us at [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>