metapen Pencil D1 Touch Pen User Manual
- June 13, 2024
- metapen
Table of Contents
metapen Pencil D1 Touch Pen User Manual
Packing List
- 1* Metapoem Pencil D1
- 1* Type-C Cable
- 1* User Manual
- 1″ Pen Tip
Customer Service
Website: www.metapen.com
Email: support@metapen.com
Compatible Devices
- iPad Pro 12.9-inch (3rd, 4th, 5th and 6th Gen)
- iPad Pro 11-inch (1st, 2nd, 3rd and 4th Gen)
- iPad Air (3rd, 4th, and 5th Gen)
- iPad Mini (5th, and 6th Gen)
- iPad (6th, 7th, 8th, 9th and 10th Gen) For
- iPad 2018 and later, all iPad models need to be updated to iOS 12.2 or later.
- If your iPad was previously paired with an Apple Pencil, please unpair it before using the D1.
Quick Guide
Hotkey and LED Guide
| Hotkey Function | Actions | LED Status |
|---|---|---|
| Turn on Dl | Press once | LED stays white for 3s |
| Turn off DI | Press for 2s | LED stays red for 3s |
| Wait to connect( Dl auto enters paring mode once it’s on) | LED blinks red |
and white alternately
Disconnect Dl| Press for 5s until the LED Rashes red and white alternately
Hotkey Functions (Default Template)
- Only available after pairing the DI with the iPad via Bluetooth.
- You can also customize hotkey function in metapoem app.
Undo last step| Press once| LED stays off
Return to the home screen page| Press twice| LED stays off
Take photos| Press 3 times| LED stays off
LED Indicator Guide
/| Plug to charge| LED stays red
/| Fully charged| LED stays white
/| Low battery reminder| Red light flashes when the
battery is below 20%
Note:
- D1 will automatically turn off after 5 minutes of inactivity.
- Pairing mode takes 30 seconds each time. Check the “How to Pair D1 with iPad part”.
- Taking photos only works when Camera is on.
How to Pair with D1
Enable Bluetooth →→ Tap the Hotkey once to activate D1 →> Search “Pencil D1” in the device -> Pair “Pencil D1”.
Battery Power Display
Long press the empty space on the home screen ->Click “+” ->Find the “Battery”, choose your preferred display.
Replace the tip
Please unscrew the old tip counterclockwise, then screw the new tip clockwise. Do not directly pull it out.
Specification
| Item name | Metapen Pencil Dl |
|---|---|
| Model Number | ME-APP452 |
| Battery Type | 90mAh lithium battery |
| Charging Method | Type-C Fast Charge |
| Charging Time | 30 minutes |
| Using Time | 8 hours when full charged |
| Standby Time | 365 days |
| Package Size | 19*6.2’1.7cm |
Warning
-
Choking hazard – Small parts. Children should use the device under adult supervision.
Built-in non-removable battery, any improper usage may cause battery safety hazards and lead to safety problems. -
Please use the device within 0°C-35°C, and store it within -20°C-45°C. Too high or low temperature may cause malfunction.
-
Do not use the device in wet places or near strong magnetic Fifield’s.
Correct Disposal of This Product
Waste Electrical & Electronic Equipment)
This Marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this
product or their local government office, for details of where and hew they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.
UK: REP
Name: Seamed Accounting Ltd
Address: Electric Avenue Vision 25, London, Enfield EN3 7GD
Contact Person : Billy Han
E-mail: info@seamew.net
EC: REP
Name: Sea &Mew Consulting GmbH Address: Mitten Huber Strafe
4,92318 Newmark
Contact Person: Yuan Li
E-mail: Compliance.EU@outlook.com
IC statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Transmitting frequency band(s):
Maximum allowed transmitting power in the frequency band(s) in which the radio
equipment operates
FCC statement :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
FCC Caution:
Any Changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
“This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an eFCC ID: 2AYOTME-APP452xperienced radio/TV technician for help.”
FCC ID: 2AYOTME-APP452