Wansview W7 2K Outdoor Security Camera Installation Guide
- June 14, 2024
- Wansview
Table of Contents
W7
Quick Installation Guide
2K Outdoor Security Camera
Product Diagram
Indicator Lights Status
Light status | Camera Status |
---|---|
Red light on | Camera is powered on |
Red and blue light alternately flashing | Waiting to connect now |
Blue light flashing | Connecting to Wi-Fi |
Blue light solid | Wifi connection succeeds |
Red light quickly flashing | 1. Reset camera to factory setting |
2. Camera is upgrading firmware
Warm note : Please make sure your router is connected to Internet
Download APP and Register Account
-
Download and Install APP
Go to the App Store or Google Play to search and download the “Wans view Cloud” APP on your smartphone. Or scan below QR code to get the APP.
https://appstore.ajcloud.net/app/wansviewcloud -
Register Account
Open the “Wansview Cloud” APP and register an account with your email and activate it Tips: Your password must be 8-16 characters, and contains at least the following three categories: numbers, uppercase letters, lowercase letters, or special characters.
And then you will receive an activation code in your e-mail, please enter this code in the APP, and log in.
If you don’t receive the activation code, please contact us with your account
**US**
service@wansview.com**UK**
service3@wansview.com We will help you activate it
Add Device
-
Before Add device on the APP, please be sure that your smartphone is connected to 2.4Ghz WiFi. 5Ghz WiFi is not supported.
And then click “Add Device” or click “+” Select W7 -
Select Model W7
Camera Setup -
Place the camera near the router, within 1 meter.
Power on the camera, wait 1-2 minutes to see if the camera’ s indicator flashes blue and red alternatively? If so, click “Flashing”. WiFi Setup -
Your 2.4Ghz WiFi name is obtained automatically, enter your WiFi password, click “ ” button to check whether the WiFi password is correct, note there shouldn’ t exist space.* If your APP doesn’ t recognize the WiFi name automatically, please activate the GPS and location authorization on the settings of your smartphone. And turn the previous page “Camera Setup” and then click “Flashing” to check whether APP recognize the WiFi name automatically.
-
Place the QR code 3-8 inches in front of the camera lens. If you hear “QR code scanning is successful”, please press “Next”
Wait for Connection
The blue light flashes quickly, meaning the WiFi is connecting.
The blue light flashes slowly, meaning the WiFi is connected.
Until the blue light i solid, meaning the paring is successful.
You can modify the name of the camera and click “OK” to view the live video.
Questions and Answers:
If you can’t find solutions from next, please contact our customer service for
help with a photo of the label (includes a QR code) on the bottom of the
camera:
**US**
service@wansview.com **UK**
service3@wansview.com
Fail to Scan ?
Fail to Connect WiFi ?
Red Light is Steady ? Can' t Reset Successfully ?
(1) Ensure the router is working properly. Reboot the router and camera to see if the camera reconnects after that. (2) If not, reset the camera by holding the Reset button 5-10s and reconnect the camera. (3) The distance between the camera and router should be within 5 meters, so camera can receive good WiFi connection.
Cloud Storage
“Wans view Cloud
APP Can't Recognize the SD Card ?
(1) Make sure the SD card can work properly by testing the write and read files functions on a computer via a SD card reader, then insert the SD card in the camera. (2) Please power off the device before inserting the SD card. (3) The device only supports FAT32 for mate, 128GB Max; please format the SD card into FAT32 format on your computer via a card reader.
After-service E-mail :
**US**
service@wansview.com
**UK**
service3@wansview.com
TEL: +13236863288 Available time: 6 pm – 3 am (PST Time) from Monday to Friday
https://www.facebook.com/WansviewOfficial
https://www.youtube.com/WansviewOfficial
Wans view Official Web: www.wansview.com