RaceFit CRW002B1 AI CORE Fitness Training Set User Guide

Quick Start Guide

RaceFit International Company Limited
www.racefitlab.com

Package Content

1. CORE x2
2. CORE holder x2
3. Strap x2
4. USB cable xl

Charging

Please use the cable provided by RaceFit to charge. Please place the two magnetic charging suction cups correctly on the charging port of the CORES, and then plug the USB into the power adapter. The CORE is charging when the red light is on. The CORE is fully charged when the green light is on.

Install App

Please scan the QR code on the left or search for “RaceFit CORE Fitness” in the App Store.

https://sport.racefitlab.com/app/download

Pairing

Please select your RaceFit product in the App, then place the COREs that you would like to pair near the phone.

Install

1. Install the CORE into the CORE holder and make sure that both of their markers are aligned.
2. Pass each end of the strap through the slots on the CORE holder and attach them.

How to remove the CORE? ,

Gently push out the CORE from the bottom of the CORE holder. Please do not try to pull the CORE out from the top of the CORE holder or you might damage the parts.

Maintenance

Please wipe the surface with a clean, damp cloth.
Warning
It is strictly forbidden to disassemble, squeeze, puncture or short-cir-cuit the product. Never place the product in water or fire, nor expose the product to an environment with a temperature higher than 60°C.

FCC Statement
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The device radiates radio frequency energy at a level below the United States FCC radio frequency exposure limits. Nevertheless, this device should be used in such a manner that the potential for human contact during normal operation is minimized. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines when used with accessory that contains no metal. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>