Ulacici B087 Wireless Active Noise Cancelling Headset User Manual

June 6, 2024
Ulacici

Ulacici B087 Wireless Active Noise Cancelling Headset

Ulacici B087 Wireless Active Noise Cancelling Headset

Introduction

Overall introduction

  1. . Great active noise canceling (ANC) effect to reduce the low-frequency noise.
  2. This product is an overhead and lightweight headset that adopts Bluetooth technology guarantees the finest sound quality and clear voice chat.
  3. The transmitting & receive distance exceeds 15 meters (straight line) in the open-air condition.
  4. The headphone is foldable to carry around and comfortable to wear.
  5. High-performance Li-ion battery supports approx. 20 hours working time with ANC function.

Product Application

  1. For PC with Bluetooth function, this product is an audio system to have the automatic wireless connection used for music play.
  2. That compatible the varied communicate/ Chat platform with clear voice.
  3. Compatible with most Bluetooth-enabled mobile phones for wide-ranging use.
  4. Also compatible with USB Dongle for non-blue tooth functions devices.

Product Descrtptlon

Feature Summary

  1. Comfortable and light weight headset design to meet the MM IC Man Machine Interface) engineering such as soft flexible headband design.
  2. Bluetooth wireless technology to provide the stable and good connection without cable.
  3. Exceed 10 meters wireless transmit and receive distance.
  4. Ear cup can have the 6 degrees rotation in left, right, up and down direction to make more comfortable.
  5. Concealed Microphone design with higher sensitivity.
  6. Remote call connection and disconnection and more operation functions of Bluetooth.
  7. High performance and longer use life battery to make sure the working time.
  8. Active noise cancelling function to make sure you can focus on music and work.
  9. Aux-in function to make this headphone can be used to device like PC and headphone by 3.5mm audio jack.

User interface

Ulacici B087 Wireless Active Noise Cancelling Headset
fig1

  1. Power On/Off
  2. Charging Indicator
  3. Microphone
  4. USB Charging port
  5. Volume Down
  6. Volume Up
  7. Port Aux-In Socket
  8. ANC ON/OFF
  9. ANC Indicator

Getting start with B087

  1. To get started using headphone, firstly you need to charge it fully. After you power it on, you can pair it with your Bluetooth-enabled phone, tablet or laptop. Once headphone is paired, you can immediately start listening to music.
  2. Charge the battery: Connect the USB cable to the usb port on B087, and the other end to a charger (Green).

Function operation

Ulacici B087 Wireless Active Noise Cancelling Headset
fig2 Ulacici B087 Wireless Active Noise
Cancelling Headset fig3 Ulacici B087 Wireless Active Noise Cancelling Headset
fig4 Ulacici B087 Wireless Active Noise
Cancelling Headset fig5 Ulacici B087 Wireless Active Noise Cancelling Headset
fig6 Ulacici B087 Wireless Active Noise
Cancelling Headset fig7

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals