Shenzhen Nanfang Liancheng Industrial 433MHz WI-Fi Smart Switch Instructions
- June 6, 2024
- Shenzhen Nanfang Liancheng Industrial
Table of Contents
Shenzhen Nanfang Liancheng Industrial 433MHz WI-Fi Smart Switch
WiFi Smart Switch
This instruction include the “RF 433MHz remote control”. according to product
you have.
Parameter:
Power supply: 90V~250V AC Max: Current: 90V~250V AC WiFi: Standard: 2. 4GHz
b/g/n Material: ABS VO
Size: 883822mm
checklist: before using the device Your smart phone or tablet has
connected to a 2. 4G WiFi with internet
Your have the correct WiFi PWD
Your smart phone or tablet must have access to APP Store, Google play.
Your router is MAC-open
User Guide
-
Start with”Smart Life”APP.
-
Register an Intelligent life account.
-
If you have Intelligent life account just log in.
-
Power up.
ON/OFF operating principle
The connected appliances work/stop through live wire power on/off.
- Appliance wiring instruction.
- Celling lamp wiring instruction.
- One wire wiring instruction.
- Appliance wiring instruction.
-
Press and hold the button for about 5 seconds until the WiFi LED blinks fast.
-
Enter the App,tap”+”in the upper right of the page to enter network connection page.
-
There are two network connection methods(Normal mode and AP mode). Normal mode is default. Users could tap the upper right corner to switch the connection method to AP mode.
-
Please make sure the device’s indicator light rapidly flashes(2 times per second),tap to go on to the next step
-
If indicator light is not rapidly flashing, tap”how to set indicator light as rapid flashes”to view operation processes
-
Input your WiFi password.
-
Name your device.
-
the device is online.
RF 433MHz remote control setting (if).
The RF LED is red.
-
Clear function
After push the receiver’s learning button 8 times, the receiver Clear all the remote control data in it’s memory. When the LED flashes for for the few times, it indicates that the clear function is completed.(After cleared the code in the receiver, all the remote control must study from receiver onece again to restart.) -
About receiver’s Working Mode
-
Momentary mode
Press the Remote control button, the receiver’s ralay is ON, release button the receiver’s relay is off. -
Toggle mode
Press Remote control button for 1 time the receiver’s relay is on ; Press button again, the receiver’s relay is OFF. -
Latched mode
Press Remote control button A, the receiver’s relay is ON, Press the transmitter’s button B, the receiver’s relay is OFF
-
-
Receiver operating mode settings
-
Setting momentary Mode
Press the receiver’s Learning button 2 times, The receiver’s RF LED will be lights up red, it comes into Setting state, Press the remote’s button, the receiver’s LED will be flash red twice then come off, Setting successfully. -
Setting Toggle Mode
Press the receiver’s Learning button 3 times, The receiver’s RF LED will be lights up red, it comes into Setting state, Press the remote’s button, the receiver’s LED will be flash red twice then come off, Setting successfully. -
Setting Latched Mode
( Note: When you choose＂Latched Mode＂you need to setting two different buttons on the Remote Control, the first time learn is for “ON”,the second time learn for “OFF” For Example: Button A=ON, Button B=OFF)
Press the receiver’s Learning button 4 times, The receiver’s RF LED will be lights up red, it comes into Setting state. Press the remote’s button A, the receiver’s RF LED will be flash red twice and lights up; Then press the remote’s button B, the receiver’s RF LED will be flash red twice and come off. Setting successfully.
-
-
Note:
- If the RF remote control’s button was learned, the receiver’s RF red LED will not be flash. now need to Clear function, and learn the again.
- every receiver just can learn Ten remote’s buttons. if you will delete the remote’s buttons, you can push the receiver’s learning button 8 times, the receiver Clear all the remote control data in it’s memory, and learn the again.
TROUBLESHOOTING
Q: How to set indicator light as rapid flashing?
- Power on device. power off after10s and then power on.
- hold the reset button for 5s.
- Confirm indicator light is now rapidly flahsing.
Q: How to set indicator light as slow flashing?
- Power on device. power off after 10s and then power on.
- hold the reset button for 5s.
- Confirm indicator light is now rapidly flahsing.
- Hold reset button for 5s until indicator light is slowly flashing.
The new added device needs 1min to connect to WiFi and the Internet if it
stays offline for a long time please judge the problem by the WiFi LED status.
WiFi LED quickly blinks one time every second; Sonoff failed to connect to
your WiFi
- Maybe you have entered wrong WiFi password.
- Sonff is too far away from your WiFi please take it closer.
- Make sure your router is MAC－open. if still failed,try to open a mobile hot apot and add again.
RF 433MHz remote control setting (if). The RF LED is red.
-
Clear function
After push the receiver’s learning button 8 times, the receiver Clear all the remote control data in it’s memory. When the LED flashes for the few times, it indicates that the clear function is completed.
(After cleared the code in the receiver, all the remote control must study from receiver once again to restart.) -
About receiver’s Working Mode
-
Momentary mode
Press the Remote control button, the receiver’s relay is ON, release button, the receiver’s relay is off. -
Toggle mode
Press Remote control button for 1 time, the receiver’s relay is on; Press button again, the receiver’s relay is OFF. -
Latched mode
Press Remote control button A, the receiver’s relay is ON, Press the transmitter’s button B,the receiver’s relay is OFF
-
-
Receiver operating mode settings
-
Setting momentary Mode
Press the receiver’s Learning button 2 times, The receiver’s RF LED will be lights up red, it comes into Setting state, Press the remote’s button, the receiver’s LED will be flash red twice then come off, Setting successfully. -
Setting Toggle Mode
Press the receiver’s Learning button 3 times, The receiver’s RF LED will be lights up red, it comes into Setting state, Press the remote’s button, the receiver’s LED will be flash red twice then come off, Setting successfully. -
Setting Latched Mode
( Note: When you choose＂Latched Mode＂,you need to setting two different buttons on the Remote Control, the first time learn is for “ON”, the second time learn for “OFF”. For Example: Button A=ON, Button B=OFF)
Press the receiver’s Learning button 4 times, The receiver’s RF LED will be lights up red, it comes into Setting state. Press the remote’s button A, the receiver’s RF LED will be flash red twice and lights up; Then press the remote’s button B, the receiver’s RF LED will be flash red twice and come off. Setting successfully.
-
-
Note: every receiver just can learn Ten remote’s buttons. If you will delete the remote’s buttons, you can push the receiver’s learning button 8 times, the receiver Clear all the remote control data in it’s memory, and learn the again.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However,there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with minimum distance between 20cm the radiator your body.