Shenzhen Bason Electronics Technology CL122 LED Strip Lights User Manual

Shenzhen Bason Electronics Technology CL122 LED Strip Lights User Manual

Product Accessories

1. LED Strip Lights *1 ES)
2. Power Supply*1
3. Adhesive Snap* 3
4. Remote Control*1
5. Alcohol Pad*1
6. Screws* 3

Product data

Model: CL122 Length: 5m Lumen: MAX 134LM Input Voltage: DC24V Wattage: MAX 12W
Color: RGB color Remote Control: RM001 Luminous Angle: 120° Remote Control Angle: 180° Remote Control Distance: 58M

Instructions for APP installation

1. Search “Dotint BT” at APP Store or Google Play Store.
2. Please keep your phone’s Bluetooth and Location Services enabled.
3. Open the app and add device, then begin to control your light. Tip, please allow ‘Dotint’ to use your music and microphone.

Why the app fails to play music(as shown in the picture) There are no songs in your local music files, please download the songs to the your phone local files.
10S: Download music from PC iTunes to your phone local files.

Functions

Function Introduction

Colorful LED light bar, the product uses infrared remote controller to switch between different color lights (12 static colors, 6 dynamic modes, 8 brightness levels), with uniquely designed R/G/B mixed dimming, and supports up to 4096 DIY colors, creates diverse atmosphere lighting, suitable for living room, cabinet, computer desk, wardrobe and other places where ambient lighting is required[

Mini Controller:

The integrated LED controller with embedded light strip has small size and is easy to connect. Just plug in the power plug and then you can start to use it. The controller uses a built-in infrared signal receiver. Please pay attention to aligning the remote controller ‘fith the controller when using it. (Note: Please avoid bject blocking that will affect the signal reception of he remote control).

How to Fix the Mounting Clips:

1. Tear off the protective film of the tape, and stick it to a fixed location. (TIPS: Use screws to keep it fixed in place)
2. The hook and loop fasteners are recommended if you install it at room corners or the strip lights are not secured.

RIG/B Mixed Dimming:

Uniquely designed R/G/B mixed dimming, supporting up to 4096 DIY colors. When the light strip is in a static color state, you can manually increase the brightness level of one of the R/G/B colors by single-press or long-press. R/G/B has 16 levels of brightness for each color:

Sleep Patterns: In the well-designed sleep mode, tap Open, the light turns orange (scientific research found that it can promote sleep) ambient light, and automatically shuts down after 30 minutes, which is easy to operate.

Installation Guide

1. Use an alcohol bag to clean the location to be installed and ensure that there is no dust or oil.

2. Peel off the sticker on the back foam and stick the strip to the mounting position.

3. The lamp strip con ects to the power supply DC male. Take care that the Mini controller is not blocked. After the power is turned on, remove the insulating plastic piece under the remote control and start to use.
   

FCC Compliance Statement

Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful Interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Cautions

Before using this product, please read the instructions for safe use of this product. When you give this product to others, please send this manual together.
1.The product is suitable for dry places,keep away from materials of flammable,explosive solid and liquid and gaseous. 2.Any small accessories of this product may cause harm to children, keep away from Children. 3.Do not use this product under extreme high and low temperature,strong vibration and high physical pressure. 4.Please use the original accessories of this product, and we do not bear any personal and property losses caused by the use of non- original accessories. 5.Please follow the installation steps in the manual to install this product. The company does not bear any loss caused by improper installation and use of the user. 6.Make sure the Mini controller is exposed when installing. 7.Working temperature: -20 ° C 45 ° C. 8.Please use the dry,clean and soft cloth to clean the product, and no use of any chemical cleaner.
APlease do not look straight at light, this may cause eye discomfort.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>