v7world CHGSTA12AC-1N Charging Station User Manual
- June 6, 2024
- v7world
Table of Contents
v7world CHGSTA12AC-1N Charging Station
GETTING STARTED
Package includes
HARDWARE
- M4x8 screws for mounting hooks 3PCS
- M5x10 for IT power supply cover security 2PCS
- M6x12 for stacking 3PCS
- Foam surface protection 4PCS
Diagram
Open Doors
- Lift handle
- Turn handle
Door Locks
Pad lock loop * Pad lock not included
SETUP
Plug into Outlet
Plug in AC Adapters Place adapters into slots
Pass the AC plug behind the adapters slots and down to the device slots Place the adapter wires on the cable holder dividers Place the devices in the dividers Wall Mounting
- Use a level and measure your mounting area precisely.
- With user supplied hardware (5/16” or M8 bolt), attach the mounting plate (mounting hooks that go into the Charging Station should be away from wall outwards) to the wall or surface. Make sure you go into the wall stud.
- Slide the Charging Station’s mounting notches over and onto the mounting hooks of the wall plate attached to the wall.
- Secure the Charging Station to the mounting plate with the supplied M4x8 screws.
Stacking Installation
- The Charging Station can use the included stacking hardware to stack and secure together.
*Max Height: 2 Charging Stations - Casters available for mobile applications (sold separately)
TECHNICAL SPECS
Dimensions
CHGSTA12AC-1N | CHGSTA12AC-1E | CHGSTA12AC-1K | |
---|---|---|---|
IM SKU | 5RU488 | J154580 | J154581 |
EAN / UPC | 0662919104905 | 0662919104912 | 0662919104929 |
Color | Black | Black | Black |
Material | High-grade 18 gauge cold rolled steel | High-grade 18 gauge | |
cold rolled steel | High-grade 18 gauge cold rolled steel | ||
Numbered Device Spaces | 12 | 12 | 12 |
Organization and convenience | Flexible device dividers with cable |
channels and num- bered device slots, numbered power adapter slots with cable
management| Flexible device dividers with cable channels and num- bered device
slots, numbered power adapter slots with cable management| Flexible device
dividers with cable channels and num- bered device slots, numbered power
adapter slots with cable management
Cooling system| Ventilation slots (60% rate)| Ventilation slots (60%
rate)| Ventilation slots (60% rate)
Warranty| 5 Year| 5 Year| 5 Year
Package Contents| Hardware, Power Cord, User manual| Hardware, Power
Cord, User manual| Hardware, Power Cord, User manual
Input Voltage| 125VAC, 15A, 60HZ| 230VAC, 15A, 60HZ| 230VAC, 15A, 60HZ
Output Voltage| 125VAC, 15A, 60HZ| 230VAC, 15A, 60HZ| 230VAC, 15A, 60HZ
Charging System| PDU| PDU| PDU
Product Dimensions| 24.02 x 16.93 x 20.67 in (610 x 430 x 525 mm)| 24.02
x 16.93 x 20.67 in (610 x 430 x 525 mm)| 24.02 x 16.93 x 20.67 in (610 x 430 x
525 mm)
Product Weight| 74.96 lbs (34 kg)| 77.16 lbs (35 kg)| 77.16 lbs (35 kg)
Package Size| 26.38 x 19.29 x 23.03 in (670 x 490 x 585 mm)| 26.38 x
19.29 x 23.03 in (670 x 490 x 585 mm)| 26.38 x 19.29 x 23.03 in (670 x 490 x
585 mm)
Package Weight| 77.16 lbs (35 kg)| 79.37 lbs (36 kg)| 79.37 lbs (36 kg)
Device slot dimensions| 11 x 1.42 x 6.4 in (281 × 36 × 162 mm)| 11 x
1.42 x 6.4 in (281 × 36 × 162 mm)| 11 x 1.42 x 6.4 in (281 × 36 × 162 mm)
Power adapter slot dimensions| 11 x 1.42 x 6.4 in (281 × 36 × 162 mm)|
11 x 1.42 x 6.4 in (281 × 36 × 162 mm)| 11 x 1.42 x 6.4 in (281 × 36 × 162 mm)
Safety & Compliance| UL approved power distribution units| CE/RoHS|
CE/RoHS
**Environment***| “Operating: -10°C to 40°C Humidity: 20% to 80% RH Storage:
-40°C to +60°C Humidity: 20% to 90% RH”| “Operating: -10°C to 40°C Humidity:
20% to 80% RH Storage: -40°C to +60°C Humidity: 20% to 90% RH”| “Operating:
-10°C to 40°C Humidity: 20% to 80% RH Storage: -40°C to +60°C Humidity: 20% to
90% RH”
*Note: For this charge cart only. Check the environment specifications of the devices you are storing.
SAFETY + WARNINGS
CAUTION
- To reduce risk of electric shock only use this product indoors.
- This product is heavy. Use caution handling and keep upright. Do not attempt to unpack or move it unassisted.
- Use caution when unpacking and save the packing material for later use. Scratches and other damage caused by mishandling is not covered by the warranty.
- Do not allow anyone to sit, stand, or climb on this product.
- Do not block the ventilation holes used for air circulation.
- Do not overload heavy objects on or inside this product.
- Before moving this product, disconnect the power from the wall outlet.
- While moving this product, make sure the power cord is secured.
- This product should always be used by adults or with adult supervision.
- Never unplug this product from the outlet when hands are wet or by pulling the power cord.
- Do not use an extension cord in conjunction with this product.
- Connection to any other type of receptacle other than a two-pole, three-wire grounded receptacle may result in shock hazard as well as violate local electrical codes.
- In the event of an emergency, disconnect the power cord from the AC power outlet.
- Do not plug the input of this product into its own output.
- Do not attach an additional extension cord, power strip, or surge protector to this product.
- Do not attach non-computer-related items, such as medical equipment, life-support equipment, microwave ovens, or vacuum cleaners to this product.
- Place cables in such a way that they won’t be pulled or snagged, and no one can step on or trip over them.
- Do not attempt to disassemble this product. This product contains no user replaceable parts. Only factory service personnel may perform repairs.
- If this product is misused, incorrectly operated or repaired, the warranty will be void.
- Do not remove plugs from outlets in use labeled “Do not remove” with a red sticker. These are required for the charging system and auxiliary outlets of the cart to function.
5 Year Warranty
English: 5 Year Limited Warranty
V7 Limited Manufacturer’s Warranty covers this Product against defects in
materials or workmanship from the date of purchase for a period of 60 months
for parts and labor. Liability under this limited warranty shall in no event
exceed the cost of replacement or the original cost of the product at the time
of purchase. In the event of product discontinuance or unavailability wherein
failure has occurred the product shall, at the sole discretion of
Manufacturer, be replaced to the first purchaser with a substantially similar
product of equal or lesser value or the first purchaser shall be provided with
a refund equal to the original i.e. first purchaser purchase price.
This limited warranty does not cover the repair of cracked, scratched, broken or modified plastic or other cosmetic damage; or parts that have been altered, defaced or removed. Also, it does not apply to repairs or replacement necessitated by any cause beyond the control of the Manufacturer or a servant or agent of the Manufacturer including, but not limited to, any malfunction, defects or failures which in the opinion of Manufacturer were caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, fire, flood, or other acts of God, incorrect line voltage or normal wear and tear, or which did not exist at the time when the Product was purchased.
This limited warranty does not apply to damage that occurs during unpacking, setup, or installation; removal of the product for repair; reinstallation of the product after repair, or shipping cost of the product for any purpose. There are no other expressed warranties, whether written or oral, other than this printed limited warranty. All implied warranties, including without limitation the implied warranties or merchantability or fitness for a particular purpose, are limited to the durations of this limited warranty.
In no event shall V7 be liable for incidental or consequential damages of any nature whatsoever, including but not limited to lost profit or commercial loss, to the full extent those damages can be disclaimed by law. Some countries do not allow the exclusion or limitation of liability arising from implied warranties, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to all purchasers. This limited warranty is subject to the laws of the relevant jurisdiction, being the country where the product is originally purchased.
This limited warranty shall only apply to the extent permitted by applicable national legislation governing the sale of consumer goods. The rights and remedies that consumers enjoy under such consumer protection laws shall not be limited. This warranty is valid only in the country where the product is originally purchased. Additional information can be found at www.V7-world.com.
You may execute this warranty where you purchased in accordance with the exchange policy of the establishment. At any time thereafter during the term of this warranty, please refer to the authorized distributor of your jurisdiction.
V7 LIMITED PRODUCT WARRANTY FOR AUSTRALIA ONLY
English: 5 Year Limited Warranty
Warranty provider. This warranty is provided by V7/Ingram Micro Pty Ltd, 61
Dunning Ave, Rosebery, NSW 2018, Australia.
V7 Limited Manufacturer’s Warranty. V7 warrants that this Product shall be
free from defects in material and workmanship from the date of purchase for a
period of twenty-four (24) months for parts and labor. This Product warranty
is non-transferable and is limited to the original purchaser. This warranty is
in addition to the guarantees that cannot be excluded under the Australian
Consumer Law and besides such Australian Consumer Law guarantees, there are no
other expressed warranties given by V7, whether written or oral, other than
this printed Product warranty.
How to Obtain Warranty Support. Before submitting a warranty claim, we
recommend you visit the support section at
www.V7-world.com for technical assistance. Valid
warranty claims are generally processed through the point of purchase during
the first thirty (30) days after purchase; however, this period
of time may vary depending on where you purchased your product – please check
with V7 or the retailer where you purchased your product for details. Warranty
claims that cannot be processed through the point of purchase and any other
product related questions should be addressed directly to V7, as follows:
V7/ Ingram Micro Pty Ltd
61 Dunning Ave, Rosebery, NSW 2018, Australia
Email: customerservice@v7-world.com
Telephone: +61 2 9381 6000
URL: www.v7-world.com
To make a claim under this warranty you should return the Product to the place
of purchase or to V7 with proof of original purchase such as a copy of the
sales receipt or dated itemized receipt. Any expense of claiming under this
warranty will be borne by you.
Your consumer rights. The benefits V7 gives you in this Product warranty are in addition to and do not detract from any rights and remedies that you may have under Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
This Product warranty is not intended to: (1) change or exclude any statutory consumer rights that cannot be lawfully changed or excluded; or (2) limit or exclude any right you have against the person who sold the V7 product to you if that person has breached their sale contract with you. V7 provides no warranty against defects beyond the rights given to you under this Product warranty and which are available to you under the Australian Consumer Law.
Remedies. If you make a valid claim under this warranty during the
warranty period, V7 will at its option: (1) repair or replace the product; or
(2) refund the price paid. Goods presented for repair may be replaced by
refurbished goods of the same type rather than being repaired. Refurbished
parts may be used to repair the goods. Repair of the goods may result in loss
of data contained in the goods and V7 takes no responsibility for the loss of
such data. If V7 replaces your hardware product, this warranty will be
extended to cover the replacement product for the remainder of the original
warranty period or thirty
(30) days from the date of replacement, whichever is longer.
Exclusions. This warranty does not cover any defects, problems, damage or failures, which in the opinion of V7 resulted from:
- (1) accident, abuse, misuse, neglect, misapplication, fire, flood or other acts of God or any unauthorized repair, service, modification or disassembly;
- (2) improper operation or maintenance, usage not in accordance with product instructions or connection to improper voltage supply;
- (3) use of consumables, such as replacement batteries, not supplied by V7;
- (4) operation contrary to furnished instructions,
- (5) shipping or transit accidents,
- (6) normal wear and tear;
- (7) which did not exist at the time when the Product was purchased; or
- (8) scratched or modified plastic, or other cosmetic damage; or
- (9) parts that have been altered, defaced or removed. This Product warranty does not apply to:
(1) damage that occurs during unpacking, setup, or installation;
(2) removal of the product for repair;
(3) reinstallation of the product after repair, or
(4) shipping cost of the product for any purpose.
USA
Ingram Micro Inc.
3351 Michelson Dr. Suite 100
Irvine, CA 92612, USA
Canada
Ingram Micro, LP Canada
55 Standish Court
Mississauga, ON, L5R 4A1, Canada
Mexico
Ingram Micro Mexico, S.A. de C.V.
Av. 16 de Septiembre No. 225
Col. San Martín Xochináuhatl
Del. Azcapotzalco, C.P. 02140 México, DF
www.V7world.com
Europe
Ingram Micro Pan Europe GmbH Heisenbergbogen 3,
D-85609 Dornach / Munich, Germany
New Zealand
Ingram Micro NZ Ltd
78 Apollo Drive, Albany
Auckland 0642, New Zealand
India
Ingram Micro India Limited
Godrej IT Park, B-Block, 5th Floor Pirojsahanagar, L.B.S. Road,
Vikhroli (West), Mumbai-400 079, India
Hereby, Ingram Micro Pan Europe GmbH, Munich, Germany declare under our sole responsibility that the Information Technology Equipment products are fully compliant with the essential requirements and other relative provisions set out in the Council Directive on the Approximation of the Laws of the Member States relating to EMC (2014/30/EU) and RoHS (2011/65/EU).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>