aiwa AT-X80Z True Wireless Earphones User Manual
- June 6, 2024
- Aiwa
Table of Contents
Aiwa AT-X80Z True Wireless Earphones
Product Overview
Unboxing
- AT-X80Z Earbuds
- Portable Charging Case
- USB Type-C Charging Cable
- Silicone Ear-tips (L & S Size)
- Cotton – Linen Blend Fabric Pouch
- User’s Manual
Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.
Product Specifications
Model Number: AT-X80Z
BT Version: V5.1
IP Rating: IPX4
Rated Power: 4mW
Frequency Response: 20~20kHz
Impedance: 32Ω ± 15%
Sensitivity: 110dB ± 3dB
Supported Profiles: a2dp\avctp\avdtp\avrcp\hfp\
spp\smp\att\gap\gatt\rfcomm\sdp\l2cap profile Transmission Distance
(Estimated): 10 Meters (No Obstacles)
Battery (Earbuds): 3.7V/40mAh
Battery (Charging Case): 3.7V/400mAh
Earbuds Playback/ Call Time: 5.5-6 Hours
Earbuds with Case Playback/ Call Time: 22-24 Hours Earbuds Standby Time:
80 Hours
Charging Case Standby Time: 260 Days
Charging Time (Portable Case): 2 Hours
Charging Time (Earbuds): 1.5 Hours
Charging Time (Portable Case with Earbuds): 3.5 Hours Earbuds Weight:
3.5g each
Charging Case Weight: 38.5g
The above are estimated values tested in a practical environment and may vary
upon individual usage habits. The charging case holds approximately 2-3
charges of the earbud’s full battery capacity depending on playback volume.
Product Usage Guide
Manual ON/OFF:
Manual ON: Long press touch sensor for two (2) seconds Alternate flashing green & white indicator light. *Make sure earphones are fully charged before using them for the first time.
Manual OFF: Long press touch sensor for four (4) seconds White indicator light lights up and extinguishes. *AT-X80Z automatically powers off after 5 minutes of disconnection.
Music Control:
Play/Pause: Click touch sensor once (1)
Next Song: Click touch sensor twice (2)
Previous Song: Click touch sensor thrice (3)
Call Control:
Answer/Hang Up: Click touch sensor once (1)
Reject Call: Long press touch sensor for one and a half (1.5) seconds
Voice Assistant:
Activate Voice Assistant: Long press touch sensor for one and a half (1.5) seconds
Connecting the Product
- Turn on Bluetooth (BT) on your mobile device
- Turn on Earbuds (Flipping open charging case will power up earbuds)
- Search and connect to “AIWA AT-X80Z” from your mobile device
Troubleshooting
L side earbud cannot be linked with R side earbud
Solution: Place earbuds back into the charging case and close the case.
Re-open the lid after a few seconds. The earbuds would now be linked to each
other & ready to be connected to your mobile device.
Only one (1) side earbud can be linked to your device
Solution: Ensure both earbuds are ON and disconnected from any devices.
Click both touch sensors four (4) times, then place earbuds back into the
charging case. AT-X80Z will be ready to connect once you remove them from the
charging case.
Battery & Charging
Charging Earbuds (Place them back into charging case):
Charging: White Indicator Light
Full Charge: Extinguished Indicator Light Approximate charging time:
1.5 Hours
Charging the Portable Charging Case (Plugin USB – C Charging Cable):
Charging: Digital Display flashes
Full Charge: Digital Display remains lit up Approximate charging time:
2 Hours
Show Battery Level: Click Once
Turn Off Battery Level Display: Click Twice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>