MODENA Compatto Series VC 0800 L Vacuum Cleaner User Manual
- June 6, 2024
- MODENA
Table of Contents
MODENA Compatto Series VC 0800 L Vacuum Cleaner
Name of Parts
- Body
- 2-in-1 Brush
- Nozzle Cover
- USB Type C Charging Cable
How to Use
- Pull the handle and remove the nozzle cover
- You may insert the 2-in-1 brush into the nozzle
- Press the power button to turn on the product and press it again to turn off the product
- Press the flashlight button to turn on the flashlight. The flashlight has 3 modes (high beam, night light, and SOS flash), it will switch between the modes in this cycle when you press the button again.
- Press and hold the flashlight button for 3 seconds to turn off the flashlight
How to Charge
If the red light is flashing slowly, it means that the power is low and needs to be charged.
- Place the product horizontally when it has stopped working.
- Insert the USB end of the Type C charging USB cable into the 5V 2A adapter (adapter not included) and connect to the power socket.
- Insert the Type C end of Type C charging USB cable into the Type C socket on the product.
- If the green light is flashing slowly, the product is charging normally. 5. If all the green light is on, the battery is fully charged.
- Remove charging cable from the product.
Attention!
- Please note that the charging port of the machine should not be exposed to water. Otherwise, it will cause product failure.
- Do not charge or store the product in a place below 0°C or above 40°C, otherwise the product performance will be reduced.
- It is a normal phenomenon that temperature of the charger rises during charging.
Maintenance
- When you need to clean and maintain this product, be sure to disconnect the power supply.
- Please do not immerse the main unit in water.
- Wipe gently with a clean soft cloth dampened with water or a mild detergent.
- Do not use corrosive liquid such as gasoline, alcohol or rubber water.
Removing and Cleaning the Dust Cup and Filter
- Turn the dust cup counterclockwise and pull to remove the dust cup.
- Remove the filter housing from the dust cup and clean the dust cup
- Rotate the filter housing clockwise and pull out the filter housing. Take out the inner filter for cleaning or replacement
- Wash the filters under flowing water and let them dry completely
- After each part is completely dried, reassemble it in reverse order when disassembling
Points of Attention
- This unit is suitable for indoor usage and read this manual before usage.
- Suitable for cleaning particles or dust less than 10 mm.
- Not suitable for cleaning liquids, organic solvents, and construction waste and industrial metal waste.
- When the power is turned on for a long time until the battery completely runs out, turn off and rest it for 30 minutes before recharging it to protect the motor and prolong its service life.
- Please keep the machine clean and store all accessories in a dry and cool place.
- After 6 months long of storage, the appliance must be turned on until it runs out of battery, and then recharge it.
- Use and charge the product for three times to achieve best motor and battery condition
Troubleshooting
Please review the chart below before contacting customer service:
Problem | Possible Causes | Solution |
---|---|---|
Running time is shorter after full charging | Battery life problem | Please |
contact dealer for processing
Red light flashing slowly during operation| Low power| Recharge
Red light flashing quickly during operation| Battery is broken| Please contact
dealer for processing
Specification
Model | VC 0800 L |
---|---|
Type | Vacuum cleaner |
Color | Black (L) |
Power type | Rechargeable |
Power supply | 5V 2A |
Battery capacity | Li-Ion 7.2V, 2 cells, 2.0 AH |
Rated Power Input (Watt) | 85 |
Charging time (hours) | 2±0.5 |
Suction Power (kPa) | 5.8±0.8 |
Dust cup capacity (mL) | 100 |
Cleaning efficiency | 99% |
Product dimension W x D x H (mm) | 87.5x70x316.5 |
Product weight (kg) | 0.8 |
S = Stainless, R = Red, C = Cream, O = Orange, N = Green, U = Blue, W = White, V = Silver, G = Grey, L = Black
Design and specification can change without prior notice to improve the
quality of the product. The pictures in this manual are schematic and can be
different with your actual product.
The values on label or in other documents are according to laboratory test and
relevant standards. Values can vary depending on the actual operational and
environmental condition of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>