SHURE MV7X Pro Quality Podcast Microphone User Guide
- June 6, 2024
- Shure
Table of Contents
MV7X
Podcast Microphone
Online user guide for MV7X.
Version: 1.2 (2021-J)
Shure Incorporated
MV7X Podcast Microphone
General Description
The Shure MV7X is a professional-quality dynamic microphone, ideal for close mic applications that require vocal intelligibility with a balanced tone. The attractive and durable all-metal design features an adjustable yoke that can be mounted onto a variety of microphone stands for flexible placement options.
Features
Voice Isolation Technology
A highly directional cardioid pattern isolates your voice and removes unwanted
background noise
Durable, Versatile Design
Rugged, all-metal construction and excellent cartridge protection for
outstanding reliability
The MV7X Microphone
The MV7X features a dynamic capsule with a cardioid pattern, which uses Voice
Isolation Technology to pick up sound directly in front of the microphone.
MV7X Output Passive XLR output: Connect to XLR mixers and interfaces.
Mounting Instructions
The MV7X microphone comes equipped with a 5/8″-27 threaded mount, the thread
size most commonly found on microphone stands. This mount can be used with a
microphone stand or hung from a boom.
Note: Be very careful not to unloosen the screws all the way.
To easily flip the microphone orientation, loosen the screws and rotate 180
degrees.
Windscreen
The windscreen offers maximum protection from plosives and creates a warmer,
more intimate sound for speech applications, like podcasting and gaming.
Specifications
Transducer Type
Dynamic (moving coil)
Polar Pattern
Unidirectional (Cardioid)
Output Impedance
252
Frequency Response
50 Hz to 16,000 Hz
Sensitivity
(@ 1 kHz, open circuit voltage) -55 dBV/Pa [1] (1.78 mV)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect
to pin 3
Housing
All metal construction
Mounting Type
5/8-27 thread mount
Net Weight
0.55 kg (1.21 lbs)
[1] 1 Pa=94 dB SPL
Typical Frequency Response
Typical Polar Pattern
Overall Dimensions
MV7X Yoke Assembly
The MV7X yoke allows a podcaster to be flexible with mic placement. Loosen the yoke knobs and you can adjust the microphone in a variety of angles. If the microphone becomes detached from the yoke, these are the steps to put it together in the correct order to ensure that your microphone is secure. Each side uses one thin gray spring washer, one shiny silver brass washer, two black plastic washers and the yoke and threaded yoke knob.
-
Start with the threaded knob flat side down on your tabletop.
-
Stack the washers on the threaded knob. Place a black plastic washer on the knob. Place one side of the yoke on next. Then put the second black plastic washer on. Place the flat silver washer and then the thin spring washer on the threaded knob.
-
Using your finger to hold the screw assembly in place, slide the MV7X onto the threaded screw and turn the knob to keep washers in place. Note: Be sure to keep this side on but loose so that you have room to easily move the yoke and assemble the washers on the opposite side.
-
On the opposite yoke arm, place the washers into the side of the MV7X in reverse order. Thinspringwasher > Flatsilverwasher > Blackplasticwasher > Yokearm
-
The yoke arm needs to be placed directly onto the stack of washers. To ensure that the washers are aligned, put a pen through the yoke and washers to make sure that everything is properly centered. Leave pen in place.
-
Place the second black plastic washer onto the remaining threaded knob. 7. Remove the pen. Insert the threaded knob and black plastic washer into the stacked washers and tighten both sides to ensure that your microphone is stable.
Accessories
Furnished Accessories
Brass Adapter…………………. 31B1856
Replacement Parts
Black Windscreen…………… AMV7-K-WS
Certifications
This product meets the Essential Requirements of all relevant European
directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH Global
Compliance Jakob-Dieffenbacher-Str. 12 75031
Eppingen, Germany
Phone: +49-7262-92 49 0
Email: info@shure.de
www.shure.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>