COX Technicolor CGM4331 Panoramic WiFi Gateway for Fiber Instructions

**COX Technicolor CGM4331 Panoramic WiFi Gateway for Fiber Instructions

**

Here’s what’s in your kit

Gateway

Power cord

Ethernet cable

If the ONT already has an Ethernet cable connected, then you won’t need the one included in the kit.

Before connecting the Gateway

Cox has already installed an Optical Network Terminal (ONT) at your residence to deliver your internet service. You’ll need to locate the ONT before connecting it to the Gateway. It’s usually mounted to an inside wall or inside a smart panel. If your ONT is on a garage or outside wall, follow the steps listed on the back FAQs panel.

Refer to your ONT to check the following:

• Ensure the POWER light on the ONT is solid green. Next, check that the PON or BROADBAND light is solid green.
• If the lights are not solid green, then we’ll need to help you get set up. Call 1-888-556-1193 for assistance.

Here’s what to do

1. Plug in the Ethernet cable
   Look at the ONT to see if there’s already an Ethernet cable connected.
   If there is a visible Ethernet cable, connect it to the bottom right Ethernet port on the Gateway. Make sure it’s the port with the orange line.
   If there is not a visible Ethernet cable, then remove the ONT’s faceplate and plug the Ethernet cable into the ONT’s Ethernet port  Plug the other end into the Gateway’s bottom right Ethernet port with the orange line. Then attach the faceplate.
   IMPORTANT
   Don’t touch or disturb the PON/WAN cord. There are dangerous lasers in use.

2. Plug in the power cord
   Plug the power cord 2 into the Gateway and
   the wall outlet. Plugging it in powers it on. Then
   wait about 10 minutes for it to fully boot up.

3. Connect to the network
   Open the wifi settings on your smartphone/computer. Connect to the network using the
   network name (SSID) and the password from the label on the bottom of the Gateway. Then surf the web to verify that your internet is working.
   We recommend you personalize your network information because it’ll be easier to remember and more secure. Just download the Cox Panoramic Wifi app and sign in to manage your network.

We’re here to help

Tips

• Place the Gateway at least 3 feet above ground and avoid cramped spaces in order to get the strongest wifi signal.
• If you have Cox phone service and want to use the Gateway for it, insert your phone cord into the top left phone port on the Gateway.

FAQs

What if my ONT is on a garage or outside wall?
Don’t connect it directly to the Gateway. Instead, plug the Ethernet cable into the Gateway’s bottom right Ethernet port with the orange line, and the other end to an active Ethernet wall jack that’s inside. Then continue the install at step 2.

How do I remove the ONT’s faceplate?
Depending on your ONT, you’ll either slide down the faceplate or pinch the sides to lift it off.

Why isn’t my Gateway working?
Try rebooting it—just unplug the power cord from the Gateway, wait about 10 seconds, then plug it back in. Make sure all of the connections are tight and completely plugged in. It’ll take a few minutes to fully reset. It’s important not to unplug or reboot the ONT.

APP: Cox app has 24/7 support & help videos
WEB: Cox.com/installhelp, Cox.com/wifisupport
CHAT: Live chat on Cox.com/chat or text 54512
CALL: 1 -888-556-1193
ACCESSIBILITY: Cox.com/accessibility

**** Help us send zero waste to landfills by recycling the kit once you’re finished. It’s made with 100% recyclable materials.

Documents / Resources

| COX Technicolor CGM4331 Panoramic WiFi Gateway for Fiber [pdf] Instructions
Technicolor CGM4331, Panoramic WiFi Gateway for Fiber, Technicolor CGM4331 Panoramic WiFi Gateway for Fiber
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>