V-TAC VT-888 LED Premium Panel Instruction Manual
- June 6, 2024
- V TAC
Table of Contents
VT-888 LED Premium Panel
Instruction Manual
TECHNICAL DATA:
| Model | Watts | Lumens | BeamAngle | PF | CRI | Input Power | Dimension | Cutting Size |
|---|---|---|---|---|---|---|---|---|
| VT-888 | 8 | 800 | 120 | >0.9 | >80 | AC:85-265V,50/60Hz | ø100x8mm | 90mm |
90x90x8nnm
VT-1515| 15| 1500| 120| >0.9| >80| AC:85-265V,50/60Hz| ø146x8mm| 130mm
146x146x8mm
VT-2222| 22| 2200| 120| >0.9| >80| AC:85-265V,50/60Hz| ø170x8mm| 155mm
170x170x 8mm
VT-2929| 29| 2900| 120| >0.9| >80| AC:85-265V,50/60Hz| ø220x8mm| 195mm
220x220x 8mm
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Install only by certified Electrician.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INSTALLATION DIAGRAM:
Step 1: Decide where you want to place the panel and cut a hole as per the cutout size provided.
Step 2: Connect the Live and Neutral wires
Step 3: Hold the two clips back against the panel light and push it into the hole. Allow the springs to pull the light up to the ceiling
Step 4: Switch ON the power and test
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC LED product. V-TAC will serve you
the best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
other queries, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at your best.
The warranty is valid for 2 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours of Daily operation. Usage of product for 24 hours a day would
void the warranty. This product is warranted for manufacturing defects only.
! WARNING
- Install only by a certified electrician.
- Proper grounding should be ensured throughout the installation
INSTALLATION INSTRUCTION:
Step 1: Decide where you want to place the panel and cut a hole as per the
cutout size provided.
Step 2: Connect the Live and Neutral wires
Step 3: Hold the two clips back against the panel light and push it into the
hole. Allow the springs to pull the light up to the ceiling
Step 4: Switch ON the power and test
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B