McIntosh AS901 Amplifier Stands Owner’s Manual
- June 4, 2024
- McIntosh
Table of Contents
AS901 Amplifier Stands
Owner’s Manual
Thank you from all of us at McIntosh
With the AS901/AS125 Amplifier Stand, you have invested in a premium accessory
that will provide you with many years of enjoyment. Please take a few moments
to familiarize yourself with the features and instructions to get the most
from your equipment.
If you need further technical assistance, please contact your dealer who may
be more familiar with your particular setup including other brands. You can
also contact McIntosh with additional questions or in the unlikely event of
needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Technical Assistance: 607-723-3512
Customer Service:
607-723-3515
Fax: (607)
724-0549
Email: [email protected]
Website: mcintoshlabs.com
Make a Note
For future reference, you can jot down your serial number and purchase
information here. We can identify your purchase from this information if the
occasion should arise.
Serial Number:—————-
Purchase Date:—————-
Dealer Name—————-
Introduction
The AS901 and AS125 Premium Amplifier Stands were designed from the ground up to be worthy of housing your high-end, premier McIntosh Power Amplifiers. These Amplifier Stands — with their beautiful grain structures, sleek black finishes, and acrylic face plates with backlit McIntosh logos — will not only visually complement your audio equipment, but paired with McIntosh Power Amplifiers such as the MC901 or MC1.25KW, they will provide you with a viewing experience that lives up to the high expectations you have for your McIntosh listening experience. The AS901 and AS125 Amplifier Stands were built from the strongest, finest Solid Ash Wood, so you can rest assured that you can enjoy this visual and audio splendor for years and years to come.
Dimensions
Power Control (Logo Backlight)
Note: Your Amplifier Stand logo backlight can illuminate when your audio equipment powers on. To do this, connect a cable to the Power Control port in the rear of the stand using the cable and connector described here.
Power Control and Trigger Connectors
The Power Control Trigger Output Jacks send and receive Power On/Off Signals
(+12 volt/0 volt) when connected to other McIntosh Components. An additional
connection is for controlling the illumination of the Power Output Meters on
McIntosh Power Amplifiers. A 3.5mmstereo mini phone plug is used for
connection to the Power Control, Trigger, and Passthru Outputs.
Specifications
Stand Material
Ash Wood
Overall Dimensions
Width is 17.813 inches (45.2cm)
Height is 4.051 inches (10.3cm)
Depth is 29.813 inches (75.7cm)
Weight
41.6 pounds (18.9Kg) net, 51.1 pounds (23.2Kg) in shipping carton
Shipping Carton Dimensions
Width is 23.812 inches (60.5cm)
Depth is 38.312 inches (97.3cm)
Height is 9.5 inches (24.1cm)
Stand Material
Ash Wood
Overall Dimensions
Width is 17.813 inches (45.2cm)
Height is 4.051 inches (10.3cm)
Depth is 18.013 inches (45.7cm)
Weight
27.1 pounds (12.3Kg) net, 35.1 pounds (15.9Kg) in the shipping carton
Shipping Carton Dimensions
Width is 23.812 inches (60.5cm)
Depth is 28.188 inches (71.6cm)
Height is 9.5 inches (24.1cm)
Packing Your Amplifier Stands
In the event it is necessary to repack the equipment for shipment, the
equipment must be packed exactly as shown. Failure to do so will result in
shipping damage.
Use the original shipping carton and interior parts only if they are all in
good, serviceable condition.
If a shipping carton or any of the interior part(s) are needed, please call or
write to Customer Service.
Department of McIntosh Laboratories. Please see the Part List for the correct
part numbers.
Part List
| Quantity | Part Number | Description |
|---|---|---|
| 1 | 33739 | Poly Bag |
20″ W X 10″ D X 36″ L
2| 34673| Foam End Cap
1| 752682| Manual/Assembly Pack
1| 34674| Shipping Carton (AS901)
1| 34672| Shipping Carton (AS125)
*Note: Your amplifier stand contents will include only one shipping carton for your corresponding model number (AS901 or AS125).
