McIntosh MPBC500 Power Bank User Manual
- May 15, 2024
- McIntosh
Table of Contents
McIntosh MPBC500 Power Bank
Specifications:
- Capacity: 5000mAh/3.7V
- Input(USB-C): 5V/3A, 9V/2A, 12V/1.5A
- Output: total 22.5W Max
- Output(USB-C): 5V/3A, 9V/2.22A, 12V/1.67A
- Type-C cable : 5V/3A, 9V/2A, 12V/1.5A
- Lightning cable: 5V/2A
- Wireless: 5W/7.5W/10W/15W Max
- USB-C+ cable+wireless: 5V/3A
Product Usage Instructions
Charging Your Device
- Before using the power bank for the first time, fully charge it until all 4 status LEDs are illuminated.
- Connect the supplied USB-C cable or your device’s cable to the power bank’s USB port and your device.
- Begin charging your device.
Checking Power Bank Battery Status:
Momentarily press the button on the power bank to check the charge level:
- 1 LED : < 25%
- 2 LEDs : < 50%
- 3 LEDs : < 75%
- 4 LEDs : < 100%
Recharging Your Power Bank:
- Use the supplied USB cable to connect the USB-C port of the power bank to a USB wall charging adapter.
- While recharging, all LEDs will be ON. If any LEDs are flashing, charging is not complete.
- Once fully charged, all LEDs will be illuminated.
Wireless Charging:
This wireless charger can charge smartphones with non-metal protective cases or silicone covers up to 6mm thick.
FAQ
- Q: What should I do if the power bank is not charging my device?
- A : Make sure the power bank is fully charged and try using a different charging cable or port on the power bank.
- Q: How can I know if my power bank is low on power?
- A : The first LED indicator bar will flash when the power bank is low on power.
- Q: Can I charge multiple devices simultaneously with this power bank?
- A : Yes, you can charge multiple devices using the appropriate cables connected to the power bank’s ports.
- Q: Is it safe to leave the power bank charging overnight?
- A : It is generally safe to leave the power bank charging overnight, but it is recommended to unplug it once fully charged to avoid overcharging.
- Q: Can I use any USB wall charger to recharge the power bank?
- A : Yes, you can use any USB wall charger with appropriate output specifications to recharge the power bank.
Please read the following carefully before using the device to ensure safe and proper usage.
Package Content
- 1x Power bank
- 1x USB-C to USB-C cable
- 1x User Manual
Specifications
Capacity: 5000mAh/3.7V
Input(USB-C): 5V/3A，9V/2A，12V/1.5A
Output: total 22.5W Max
Output(USB-C): 5V/3A，9V/2.22A，12V/1.67A
Type-C cable: 5V/3A，9V/2A，12V/1.5A
Lightning cable: 5V/2A
Wireless: 5W/7.5W/10W/15W
Max wireless: 5V/3A
Charging your device using your power bank:
IMPORTANT: Before using your power bank for the first time, fully charge
it (when powered on, all 4 status LEDs are illuminated). Connect the supplied
USB-C cable (or the cable that came with your device) to the power bank’s USB
port and to your device. Then begin charging.
Use a built-in Type-C cable or Lightning cable to your device. Then begin
charging. During charging of your device, the four indicators will shut off
one by one as your device receives power, when the power bank is low in power,
the first LED indicator bar will flash and go out automatically until all the
power is used up. Checking your power bank battery’s charging status
Momentarily press the button on your power bank and the status LEDs will indicate its charge level. Four LEDs mean that the power bank battery is fully charged, while one LED means that it’s almost empty. Know before you go!
- 1 LED < 25%
- 2 LEDs < 50%
- 3 LEDS < 75%
- 4 LEDs < 100%
If you see no LEDS or 1 flashing LED, the battery status is less than 10%. Please recharge the power bank.
Recharging your power bank
To recharge your power bank, use the supplied USB cable to connect its USB-C port to a USB wall charging adapter. While recharging the power bank, all LEDs are ON. If there are one or more LEDs flashing, the charging is not completed. Once the power bank is fully charged, all LEDs are illuminated.
The green LED indicator will light up once the unit enters fast charging mode.
NOTE : For best results, do not connect the power bank to a computer’s
USB port.
We recommend using a wall charging adapter that supports fast charging
protocols such as QC or PD.|
Wireless charging
- Press and release the button, place your smartphone that supports wireless charging on the magnetic charger surface, and the unit enters wireless charging mode.
- The green LED indicator will light up once the unit enters fast charging mode.
- To stop the wireless charging function, press the button twice quickly or simply remove the smartphone.
It will automatically turn off if no load is detected within 30 seconds.
This wireless charger can charge smartphones with non-metal protective cases
or silicone covers that are no thicker than 6mm. Security advice:
Attention
- Incorrect usage can cause explosions/danger of chemical burns.
- Damaged batteries can cause chemical burns when they come in contact with human skin.
- Do not disassemble the item.
- Never throw the item or parts of it into fire.
- Never expose the item to high temperature changes Hot/Cold, humidity, or liquids.
- Do not use if the items or parts of it are damaged.
- Store in a clean and dry space.
- To maintain battery good health, the item should be recharged every 6 months. The battery will lose capacity when stored without charging.
- If the product gets very hot, please disconnect the item and do not use it.
- Do not put any bare metal objects on the surface of the wireless charger when it is operating.
FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>