Soundcore R100 User Manual: Easy Steps for Charging & Pairing

The Soundcore R100 True Wireless Earbuds User Manual provides easy-to-follow instructions for charging, pairing, and using the earbuds. Before charging, it is important to fully dry off both the earbuds and USB port to prevent any damage. A certified USB-C charging cable and charger should be used to ensure safety. The manual provides detailed instructions on how to wear the earbuds comfortably and securely, including selecting the EarTips that fit best. The earbuds automatically power on when taken out of the charging case and power off when placed back in. Bluetooth pairing is simple and the earbuds will automatically connect to the last successfully connected device within range. The manual also includes a list of controls for both stereo and mono modes, as well as specifications for input, battery capacity, and Bluetooth range. Additionally, the FAQ section provides helpful information on battery life, charging time, and compatibility with Apple devices. Soundcore is a well-known brand that offers quality products at reasonable prices, making it a strong competitor in the market.

**Soundcore R100 True Wireless Earbuds User Manual

**

Soundcore R100 True Wireless Earbuds User Manual

Charging

• Fully dry off the earbuds and the USB port before charging.

• Use a certified USB-C charging cable and charger to prevent any damage.

• Fully charge both the earbuds and the charging case before the first use.
  1. Place the earbuds in the charging case and close it.
  2. Connect the charging case to the power supply by using a USB-C charging cable.

• The LED indicator on the charging case indicates the charging status

Wearing

1. Choose the EarTips that fit your ears best.
2. Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.
   

• Your earbuds come with 3 pairs of EarTips, among which Medium-sized are pre-installed.

Powering On/Off

• The earbuds will automatically power on when taken out of the charging case.

• To power off, place the earbuds into the charging case and close it
  

• The earbuds will automatically power off after 10 minutes if no device is connected.

• To manually power on, press and hold the multi-function button on both earbuds for 3 seconds.

• To manually power off, press and hold the multi-function button on either earbud for 8 second

Bluetooth Pairing

1. Take the earbuds out of the charging case, the earbuds will automatically enter Bluetooth pairing mode.
   The LED indicator on the charging case will flash white.

2. Select “Soundcore R100” on your device’s Bluetooth list to connect.

• When successfully connected, the LED indicator on the charging case will turn of
  

• When earbuds are out of the charging case and powered off, to manually enter Bluetooth pairing mode, press and hold the multi-function button on both earbuds for 3 seconds.

• Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.

• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by placing the other one into the charging case.

• When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.

• When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.

Controls

Stereo Mode

Play/Pause| Press twice (R)
Next track| Press and hold for 2 seconds (R)
Previous track| Press and hold for 2 seconds (L)
Volume up| Press once (R
Volume down| Press once (L
Switch EQ| Press three times
Answer a call| Press once (L/R)
End a call| Press twice (L/R)
Reject a call| Press and hold for 2 seconds (L/R)

Activate Siri or other voice assistant software| Press twice (L)
Mono mode
Play/Pause| Press twice
Answer a call| Press once
End a call| Press twice
Reject a call| Press and hold for 1 second
Activate Siri or other voice assistant software| Press and hold for 1 second

Reset

• You might need to reset the earbuds if you experience any connectivity problems or function issues.

1. Place the earbuds into the charging case and remain the case open.
2. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times. This confirms that the reset was successful and your earbuds can be connected normally.
   

Specifications

• Specifications are subject to change without notice

with the charging case)
Driver size| 10 mm x 2
Frequency response| 20 Hz – 20 kHz
Impedance| 16 Ω
Waterproof level| IPX5（earbuds)
Bluetooth version| V 5.0
Bluetooth range| 10 m / 33 ft

FAQS

does it contain MIC in both earbuds?

Not good to calling

How long does the battery last?

The battery lasts for 3 hours of continuous music playback.

How long does it take to charge the earbuds?

It takes 1 hour to fully charge both the earbuds and the charging case.

What happens if I don’t fully charge the earbuds before using them?

You will get a shorter battery life.

How do I know whether my earbuds are fully charged?

The LED indicator on the charging case will turn green when fully charged.

How do I know whether my earbuds are fully charged?

The LED indicator on each earbud will turn red when fully charged.

Is Anker R100 good?

Anker is a well-known brand that combines the top specifications with great quality and reasonable prices, thus the brand competes strongly with other international brands such as Apple and Anker is seen as the best alternative for a more reasonable price.

Is Soundcore earbuds any good?

The best Soundcore earbuds we’ve tested are the Anker SoundCore Life P3 Truly Wireless. These sleek in-ears have a good build quality that’s certified IPX5 for resistance against direct water contact. Their fit is comfortable and stable, making them a solid choice for tough workouts at the gym

Does Soundcore R100 have an app?

App Description:  The Soundcore app  offers unique features for each of the supported Soundcore devices and allows you to personalize and optimize your listening experience.

Is Soundcore a good brand?

The Anker Soundcore is without a doubt  one of the best speakers you can get if your upper limit is $50. The sound-to-size ratio is great and it has the sound quality of a speaker twice its size.

Are Soundcore TWS good?

4.0 out of 5 stars Excellent customer support along with very good quality product. The quality of the products offered by Anker is excellent and this one is no different. Build quality is good, and sound quality is at par with the likes of Jbl, Harman, etc. Battery backup: so far so good, no issues.

Does Soundcore work with iPhones?

Compatibility: Bluetooth; works with all Macs, iPads, iPhones and iPods that have Bluetooth. This means in practice all Mac’s, iPads and iPhones and all iPod touches.

Can you track Soundcore earbuds?

Go to the soundcore app and activate “Find My Headset”. The lost earbud will emit a loud noise to help you locate it.

Will any earbuds work with iPhones?

You can use any headphones that terminate into a standard 3.5mm connector. The one downside is that you won’t be able to charge your iPhone with a Lightning cable while listening to music.

What if I lost one earbud?

If you have damaged or lost one earbud from your pair and need to  purchase a replacement. Since the true wireless earbuds are paired to the charging case, you will need to purchase both earbuds to recieve a replacement.

Are wireless earbuds safe?

For the moment, here’s what the United States Federal Communications Commission (FCC) says about wireless devices and your health: “Currently no scientific evidence establishes a causal link between wireless device use and cancer or other illnesses.

www.soundcore.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>