HAYLOU GT2S True Wireless Earbuds User Manual

Haylie GT2S Wiress Earbuds User Manual

Overview

Package list

Eartips * 3 pairs(medium size ear tips have been put on), earbuds, charging case, charging cable, user manual.
Basic Parameters(earbuds)
Operation range: 10m( open space with no obstacle)
Battery capacity: 43mAh(single earbud)
Charging time: approx. 2hr
Talk time: approx. 4hr
Standby time: approx. 100hr
Input parameter: 5V — 100mA
Battery type: li-ion
Bluetooth version: v5.0
Basic Parameters(charging case)
Input parameter:5V — 500mA
Output parameter:5V = 150mA
Charging time: approx. 2hr
Standby time: approx. 4 months
Battery capacity: 310mAh Battery type: li-ion

How to Wear

Please adjust Mic towards your mouth to gain a better calling experience.
How to Charge
For first-time use, please take off stickers and top-up earbuds prior to power-on.

Power-on

Pick up earbuds from the case to power them on. If earbuds are out of the case, hold MFB for 1.5s to power them on(LED glows white for 1s).

Power-off
Pop earbuds into the case to power them off. Hold MFB for 4.5s to power them off. (LED glows red for 2s).

Stereo Mode

Auto connection: take up two earbuds from the case, they will auto power on and pair with each other in 3s. When LED on the right earbud blinks white slowly, search for Haylou GT2S on your cellphone and tap to connect both earbuds to the cellphone. If earbuds fail to connect to cellphones, please pop them back into the case and repeat the above steps. Once power on, earbuds will auto-reconnect to the last device in connectivity records, if any. (Bluetooth faculty needs to be activated).
Note: GT2S has been set to factory before shipping out.

Manual pairing : power off earbuds then manually power on them. Earbuds will auto pair with each other in 3s. When LED on the right earbud blinks white slowly, search for Haylou GT2S on your cellphone and tap to connect.

Mono Mode

Auto-connect: Pick up either earbud from the case. The earbud will auto power on. LED will then blink white slowly, search Haylou GT2S on the phone, and tap to connect. Once power on, the earbud will auto-reconnect to the last device in connectivity records, if any. ( Bluetooth faculty needs to be activated ). Manual pairing: power off earbuds then manually power on either earbud. When LED on the earbud blinks white slowly, search for the earbud and tap on phone to connect.
Charge the Case
Charge the case via USB cable.
Charging: LED glows solid red
Top-up: LED turns off

Functions

Factory Setting

If earphones do not function well, please refer to the following steps to reset the factory: take earbuds out from the case. Power off the earbuds then holds MFBs on both earbuds for about 15s ( LED will blink red and white three times twice). After that, put them back to the case to set earbuds to the factory ( TWS pairing and connecting records will all be deleted ).
Audio only outputs from a single earbud It’s a rare case. Please reset the earphones, remove the connectivity record on your cellphone, and re-connect the earphones to your cellphone.
Other problems in charging
Red will turn off once earbuds are topped up. Carry case will not charge earbuds if its battery drains. LEDs on the carrying case will turn off once the case is topped up. If you charge it once again, LEDs will not give any notice, which does not mean the case is not charged.

Caveats

Warning

1. Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
2. Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
3. Keep the indicators away from the eyes of children and animals while using the earphones.
4. Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
5. Do not wipe and clean the earphones or their case with alcohol or other volatile liquids.
6. Avoid any contact with liquids.

Note

1. Please read this instruction manual carefully before using the product and please properly store it.
2. When using it for the first time, please fully charge this product.
3. Please charge the product, in case it has not been used for over two weeks.
4. Please use a certificated charger.
5. Do not wear earphones for the long term to protect your hearing.

Do not wear earphones in any situations with
Daily maintenance
Please do not shower with earbuds. Do not wear them on rainy days. Do not leave them in the washing machines or other extreme situations. Clean them with dry cloth.

Warranty Card

Warranty Period
12 months after you purchase this item. ( or you may inquire your local shopper for more details.) Free Service Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service.

Model Number|
---|---
Date of Purchasing|
User’s Name|
User’s Phone|
User’s Address|
Shop’s Name|
Shop’s Address|
Comments|

Free exchange service will not be accessed under the following circumstances:

1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

Manufacturer: Dongguan Liesheng Electronic Co., Ltd.
Address• Suite 1303, 1305 and 1306, 13/F,
Project Phrase 2 of Gaosheng Tech
District, Dongguan City, Guangdong, China.

Documents / Resources

| HAYLOU GT2S True Wireless Earbuds [pdf] User Manual
GT2S, True Wireless Earbuds, GT2S True Wireless Earbuds
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>