BOSCH PKG775FP2E Traditional Electric Cooktop User Manual
- June 6, 2024
- Bosch
Table of Contents
PKG775FP2E Traditional Electric Cooktop
Hob
PKF6..FP.., PKF63..FP.., PKF64.FP.C, PKF65.FP.., PKF6..FP.G, PKF6..FP.R, PKN6..FP.., PKF7..FP.., PKG6..FP..,
[en]
User manual
boMsgecywRnthBefeeo-rwhegslcecoidsohbmetmevneeinocree.wecfyiooaotnsnum:dr /
PKF6..FP.., PKF7..FP..
Ø 18
Ø 14,5
Ø 14,5 Ø 21/12
PKF63..FP.., PKF64.FP.C, PKF65.FP..
Ø 21/12 Ø 14,5
Ø 14,5 Ø 18
PKG6..FP..
Ø 21/12 Ø 14,5
Ø 14,5 Ø 18/8
PKF6..FP.G, PKF6..FP.R
Ø 21
Ø 14,5
Ø 14,5 Ø 18/8
PKN6..FP..
Ø 17/26,5 Ø 14,5
Ø 18
PKG7..FP..
Ø 21/14,5
Ø 18/12 Ø 14,5
Ø 14,5 Ø 21/12
2
Ø = cm
Table of contents
1 Safety ………………………………………………………….. 3 2 Preventing material damage …………………………. 4
3 Environmental protection and saving en-
ergy …………………………………………………………….. 5 4 Familiarising yourself with your appliance
…….. 6 5 Basic operation ……………………………………………. 7 6 PowerBoost function
……………………………………. 8 7 Childproof lock…………………………………………….. 9 8 Time-setting
options…………………………………….. 9 9 Automatic switch-off…………………………………… 10 10 Wipe
protection ………………………………………….. 10 11 Energy consumption display ………………………. 10
12 Basic settings…………………………………………….. 10 13 Cleaning and servicing
……………………………….. 11 14 Troubleshooting…………………………………………. 12 15
Disposal…………………………………………………….. 13 16 Customer Service……………………………………….. 13
1Safety
Observe the following safety instructions. 1.1General information ¡ Read this
instruction manual carefully. ¡ Keep the instructions, the appliance pass
and the product information safe for future reference or for the next owner. ¡
Do not connect the appliance if it has been damaged in transit. 1.2Intended
use Only a licensed professional may connect appliances without plugs. Damage
caused by incorrect connection is not covered under the warranty. Only use
this appliance: ¡ To prepare meals and drinks. ¡ Under supervision. Never
leave the appliance unattended when cooking for short periods. ¡ In private
households and in enclosed spaces in a domestic environment. ¡ Up to an
altitude of max. 2000 m above sea level.
Safetyen
Do not use the appliance: ¡ With an external timer or a separate remote
control. This does not apply if operation with appliances included in EN 50615
is switched off. 1.3Restriction on user group This appliance may be used by
children aged 8 or over and by people who have reduced physical, sensory or
mental abilities or inadequate experience and/or knowledge, provided that they
are supervised or have been instructed on how to use the appliance safely and
have understood the resulting dangers. Children must not play with the
appliance. Children must not perform cleaning or user maintenance unless they
are at least 15 years old and are being supervised. Keep children under the
age of 8 years away from the appliance and power cable. 1.4Safe use
WARNING Risk of fire! Leaving fat or oil cooking on an unattended hob can be
dangerous and may lead to fires. Never leave hot oil or fat unattended. Never
attempt to extinguish a fire using wa-
ter; instead, switch off the appliance and then cover with a lid or a fire
blanket. The cooking surface becomes very hot. Never place flammable objects
on the cooking surface or in its immediate vicinity. Never place objects on
the cooking surface. The appliance will become hot. Do not keep combustible
objects or aerosol cans in drawers directly underneath the hob. Hob covers can
cause accidents, for example due to overheating, catching fire or materials
shattering. Do not use hob covers. Food may catch fire. The cooking process
must be monitored. A short process must be monitored continuously.
3
enPreventing material damage
WARNING Risk of burns! The appliance and its parts that can be touched become
hot during use, particularly the hob surround, if fitted. Caution should be
exercised here in order
to avoid touching heating elements. Young children under 8 years of age must
be kept away from the appliance. Hob protective grilles may cause accidents.
Never use hob protective grilles. The appliance becomes hot during operation.
Allow the appliance to cool down before
cleaning. WARNING Risk of electric shock!
Incorrect repairs are dangerous. Repairs to the appliance should only be
carried out by trained specialist staff. Only use genuine spare parts when
repair-
ing the appliance. If the power cord of this appliance is dam-
aged, it must be replaced by trained specialist staff. If the appliance or the
power cord is damaged, this is dangerous. Never operate a damaged appliance.
If the surface is cracked, you must switch off the appliance in order to
prevent a possible electrical shock. To do this, switch off the appliance via
the fuse in the fuse box rather than at the main switch. Call customer
services. Page 13
An ingress of moisture can cause an electric shock. Do not use steam- or high-
pressure clean-
ers to clean the appliance. The insulation on cables of electrical appliances
may melt if it touches hot parts of the appliance. Never bring electrical
appliance cables into
contact with hot parts of the appliance. WARNING Risk of injury!
Saucepans may suddenly jump due to liquid between the saucepan base and the
hotplate. Always keep hotplates and saucepan
bases dry. WARNING Risk of suffocation!
Children may put packaging material over their heads or wrap themselves up in
it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to
suffocate. Keep small parts away from children. Do not let children play with
small parts.
2 Preventing material damage
ATTENTION! Rough pot and pan bases will scratch the ceramic. Check your
cookware. Boiling pans dry may damage cookware or the appliance. Never place
empty pans on a heated hotplate or al-
low to boil dry. Incorrectly positioned cookware can cause the appliance to
overheat. Never place hot pots or pans on the controls or the
hob surround. Damage can occur if hard or pointed objects fall onto the hob.
Do not let hard or pointed objects fall onto the hob. Non heat-resistant
materials will melt on heated hotplates. Do not use oven protective foil. Do
not use aluminium foil or plastic containers.
2.1Overview of the most common damage
Here you can find the most common types of damage and tips on how to avoid them.
Damage Cause Stains Food boiling
over
Stains Scratch es
Unsuitable cleaning products Salt, sugar or sand
Scratch es Discolouration
Rough pot or pan bases Unsuitable cleaning products
Measure Remove boiled-over food immediately with a glass scraper. Only use
cleaning products that are suitable for glass ceramic. Do not use the hob as a
work surface or storage space. Check your cookware.
Only use cleaning products that are suitable for glass ceramic.
4
Environmental protection and saving energyen
Damage Cause Discol- Pan abrasion, ouration e.g. aluminium
Measure Lift pots and pans to move on the hob.
Damage Cause Blisters Sugar or food
with a high sugar content
Measure Remove boiled-over food immediately with a glass scraper.
3 Environmental protection and saving energy
3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
Sort the individual components by type and dispose
of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less energy. Select
the cooking zone to match the size of your pan. Centre the cookware on the
hob. Use cookware whose base diameter is the same diameter as the hotplate.
Tip: Cookware manufacturers often give the upper diameter of the saucepan. It
is often larger than the base diameter. ¡ Unsuitable cookware or incompletely
covered cook-
ing zones consume a lot of energy. Cover saucepans with suitable lids. ¡
Cooking without a lid consumes considerably more
energy. Lift lids as infrequently as possible. ¡ When you lift the lid, a lot
of energy escapes.
Use a glass lid. ¡ You can see into the pan through a glass lid
without having to lift it. Use pots and pans with flat bases. ¡ Uneven bases
increase energy consumption.
Use cookware that is suitable for the quantity of food. ¡ Large items of
cookware containing little food need
more energy to heat up. Cook with only a little water. ¡ The more water that
is contained in the cookware,
the more energy is required to heat it up. Turn down to a lower power level
early on. ¡ If you use an ongoing power level that is too high,
you will waste energy. Take advantage of the hob’s residual heat. With longer
cooking times switch off the hotplate 5-10 minutes before the end of cooking.
¡ Unused residual heat increases energy consump-
tion.
5
enFamiliarising yourself with your appliance
4 Familiarising yourself with your appliance
The instruction manual is the same for various different hobs. You can find
the hob dimensions in the overview of models. Page 2
4.1Control panel
You can use the control panel to configure all functions of your appliance and
to obtain information about the operating status.
4.2Indicators/symbols
The displays show selected values and functions.
Display /
Name Heat settings Residual heat PowerBoost function Timer
4.3Touch fields
Touch fields are touch-sensitive surfaces. To select a function, touch the
relevant field.
Touch field
…
Name Main switch Wipe protection Childproof lock Automatic zone control Hotplate selection Control panel Timer Powerboost
Notes ¡ Always keep the control panel dry. Moisture impairs
the function. ¡ Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4Hotplates
You can find an overview of the different activations of the hotplates here. If you operate the activations, the relevant displays light up. If you switch on a hotplate, it will switch to the setting last selected.
Hotplate
Name
Activating and deactivating
Single-circuit cooking zone Dual-circuit hotplate Roasting zone
Select a hotplate.
Select a hotplate. Touch . Select a hotplate. Touch .
Notes ¡ Dark areas in the glow pattern of the hotplate are
part of the technical design. They do not affect the functionality of the
hotplate. ¡ The hotplate regulates the temperature by switching the heat on
and off. The heat may also switch on and off when at the highest setting. ¡
With multi-circuit hotplates, the heating of the hotplate and the activated
areas may switch on or off at different times. Reasons: Easily damaged
components are protected
against overheating. The appliance is protected against electrical
overload. This achieves a better cooking result.
6
4.5Residual heat indicator
The hob has a two-stage residual heat indicator for each hotplate. Do not
touch the hotplate while the residual heat indicator is lit up.
5 Basic operation
5.1Switching the hob on or off
The main switch is used to switch the hob on and off. If you switch the
appliance back on again within 4 seconds after switching off, the hob will
start up with the previously stored settings.
5.2Switching on the hob
Touch . a The light bar above lights up brightly. a The displays for the
controls and the heat setting
displays light up. a The hob is ready for use.
5.3Switching off the hob
The hob will switch off automatically when all hotplates have been switched
off for a while (10-60 seconds). Touch . a The indicator lamp above goes out.
a The displays go out. a All hotplates are switched off. a The residual heat
indicator remains on until the hot-
plates have cooled down sufficiently.
5.4Setting the hotplates
To set a hotplate, it has to be selected. Select the required heat setting on
the control panel.
Heat setting
1
Lowest setting
9
Highest setting
.
Every heat setting has an intermediate
setting, e.g. 4. .
5.5Selecting heat settings
Requirement: The hob is switched on. 1. Select the hotplate with . a lights up
in the heat setting indicator.
under the heat setting indicator.
lights up
Display
Basic operationen
Meaning The hotplate is so hot that you can keep small dishes warm or melt
cooking chocolate. The hotplate is hot.
2. Select a heat setting on the control panel.
2 3 4 5 62 3 4 5
5.6Changing heat settings
1. Select the hotplate with . 2. Select a heat setting on the control panel.
5.7Switching off the hotplate
1. Select the hotplate with . 2. Select 0 on the control panel. a If you have
switched off a hotplate, the residual heat
indicator appears after approx. 10 seconds. Note: The hotplate last selected
remains activated. You can adjust the hotplate without selecting it again.
5.8Recommended cooking settings
You can find an overview of different foods with appropriate power levels
here. The cooking time varies depending on the type, weight, thickness and
quality of the food. The ongoing power level depends on the cookware used.
Cooking tips ¡ To bring food to the boil, use heat setting 9. ¡ Stir thick
liquids occasionally. ¡ Food that needs to be seared quickly or that initially
loses a lot of liquid during frying should be fried in small portions. ¡ Tips
for saving energy when cooking. Page 5
Melting
Food
Chocolate, cooking chocolate Butter, honey, gelatine
Ongoing cooking setting
1-1. 12
Ongoing cooking time in minutes –
7
enPowerBoost function
Heating or keeping warm
Stew, e.g. lentil stew
12
–
Milk1
1.-2.
–
Sausages in water1
34
–
1 Prepare the dish without the lid.
Defrosting and heating
Spinach, frozen Goulash, frozen
2.-3.
1020
2.-3.
2030
Poaching or simmering
Dumplings1, 2
4.-5.
2030
Fish1, 2
45
1015
White sauce, e.g. béchamel
12
36
Whisked sauces, e.g. sauce
34
béarnaise or hollandaise
812
1 Bring the water to the boil with the lid on. 2 Continue to cook the dish without a lid.
Boiling, steaming or stewing
Rice with double the volume of 23 water
1530
Rice pudding
1.-2.
3545
Unpeeled boiled potatoes
45
2530
Boiled potatoes
45
1525
Pasta, noodles1, 2
67
610
Stew, soup
3.-4.
1560
Vegetables, fresh
2.-3.
1020
Vegetables, frozen
3.-4.
1020
Food in a pressure cooker
45
–
1 Bring the water to the boil with the lid on. 2 Continue to cook the dish without a lid.
Braising
Roulades Pot roast Goulash
45
5060
45
60100
2.-3.
5060
6 PowerBoost function
PowerBoost lets you heat up large volumes of water even faster than on heat
setting 9. The PowerBoost function is only available on hotplates marked with
.
6.1Switching on PowerBoost
WARNING Risk of fire! Oil and fat heat up quickly with the PowerBoost
function. Oil and fat ignite quickly if overheated. When cooking, never leave
the hob unattended.
8
Frying with little oil Fry food without a lid.
Escalope, plain or breaded Escalope, frozen Chops, plain or breaded1 Steak, 3
cm thick Patties, 3 cm thick1 Hamburgers, 2 cm thick1 Poultry breast, 2 cm
thick1 Poultry breast, frozen1 Fish or fish fillet, plain Fish or fish fillet,
breaded Fish or fish fillet, breaded and frozen, e.g. fish fingers Scampi,
prawns Vegetables or mushrooms, fresh, sautéing Vegetables or meat in strips
cooked Asian-style Stir fry, frozen Pancakes
67 67 67 78 4.-5. 67 56 56 56 67 67
78 78
7.-8.
67 67
Omelette
3.-4.
Fried eggs
56
1 Turn the dish several times.
610 812 812 812 3040 1020 1020 1030 820 820 812
410 1020
1520
610 one by one one by one 36
Deep-frying Deep-fry food in 12 l oil in batches, 150200 g per batch. Cook food without a lid.
Frozen products, e.g. chips or 89
–
chicken nuggets
Croquettes, frozen
78
–
Meat, e.g. chicken
67
–
Fish, breaded or battered
56
–
Vegetables or mushrooms,
56
–
breaded or battered
Tempura
Small pastries, e.g. doughnuts, 45
–
fruit in batter
Requirement: With dual-circuit hotplates, the second filament circuit has to
be activated for use with the PowerBoost function. 1. Select the cooking zone.
2. Touch in the settings area. a The display lights up.
6.2Switching off PowerBoost
If you do not switch off the PowerBoost function, it will switch off
automatically after a certain period of time. The hotplate switches back to
heat setting 9. 1. Select the hotplate.
2. Select any ongoing cooking setting.
7 Childproof lock
You can use the childproof lock to prevent children from switching on the hob.
7.1Activating the childproof lock
Requirement: The hob is switched off.
Press and hold
for approx. 4 seconds.
a The indicator lamp above
lights up for
10 seconds.
a The hob is now locked.
8 Time-setting options
Your appliance has different time-setting options which can be used to set a
cooking time or a kitchen timer.
8.1Cooking time
Enter a cooking time for the relevant hotplate. When the cooking time has
elapsed, the hotplate switches off automatically. You can set a cooking time
of up to 99 minutes. Setting the cooking time Requirement: The hotplate is
selected and set. 1. Touch . a The display for the hotplate lights up. lights
up on the timer display. 2. Within the next 10 seconds set the required
cooking
time on the control panel.
a The cooking time counts down. If you have set a cooking time for more than
one hotplate, the cooking time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate switches off. A signal
sounds and flashes on the display for 10 seconds. The display lights up
brightly.
Changing or cancelling the cooking time 1. Select the hotplate. 2. Touch . a
The display lights up brightly. 3. On the control panel change the cooking
time or set
it to .
a The display goes out.
Childproof locken
7.2Deactivating the childproof lock
Press and hold
for approx. 4 seconds.
a The lock is now released.
7.3Automatic childproof lock
This function automatically activates the childproof lock when you switch off
the hob. The automatic childproof lock can be activated in the basic settings.
Page 10
Switching off the continuous signal You can switch the signal off manually.
Touch any symbol. a The displays will go out and the audible signal will
stop.
Automatic timer You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected cooking time
counts down. When the cooking time has elapsed, the hotplate switches off
automatically. Switch on the automatic timer in the basic settings. Page 10
Tip: The automatic timer is valid for all hotplates. You can reduce or delete
the cooking time for individual hotplates. Page 9
8.2Kitchen timer
You can set a time of up to 99 minutes after which a signal will then sound.
The kitchen timer runs independently of all other settings.
Setting the kitchen timer 1. Switch on the kitchen timer.
There are 2 different ways of switching the kitchen timer on.
If a hotplate has been selected. If a hotplate has not been selected.
Touch twice within 10 seconds. Touch .
a The indicator lights up.
2. Within the next 10 seconds set the required time on the control panel.
a The time counts down. a When the time has elapsed, a signal sounds.
lights up on the timer display. The indicator for the kitchen timer lights up
brightly. It switches off after 10 seconds.
9
enAutomatic switch-off
Displaying the time Select the kitchen timer with . a The time is displayed
for 10 seconds.
Setting the correct time 1. Select the kitchen timer with .
2. Set the required time on the control panel.
Switching off the timer signal You can switch the signal off manually. Touch
any touch field. a The display goes out and the audible signal ceases.
9 Automatic switch-off
If you do not change the settings of a hotplate for a long time, automatic
switch-off will be activated. When the hotplate switches off depends on the
heat setting selected (1 to 10 hours). The heat to the hotplate is switched
off. and the residual heat indicator / flash alternately on the hotplate
display.
9.1Continuing cooking after automatic switch-off
1. Touch any touch field. a The display goes out. 2. Reset.
10 Wipe protection
Wiping over the control panel while the hob is switched on may alter settings.
Your hob has a wipe protection function to prevent this. The main switch is
excluded from the wipe protection function. You can switch the hob off at any
time.
10.1Activating wipe protection
Touch .
a A signal sounds.
a The indicator lamp above
lights up.
a The control panel is locked for 30 seconds.
11 Energy consumption display
This function indicates the total amount of energy consumed between switching the hob on and switching it off again. Once switched off, the energy consumption is displayed in kilowatt hours, e.g. 1.08 kWh, for 10 seconds.
The accuracy of the display depends on various factors such as the voltage quality of the power supply. The display can be activated in the basic settings. Page 10
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1Overview of the basic settings
You can find an overview of the basic settings and the default factory
settings here.
Dis- Selection play
Automatic childproof lock Switched off1 Switched on Manual and automatic
childproof lock are
switched off. 1 Factory setting
Dis- Selection play
Signal tone Confirmation signal and operating error
signal are switched off. The main switch signal remains switched on.
Only the operating error signal is switched on.
Only the confirmation signal is switched on.
Confirmation signal and operating error signal are switched on.1 1 Factory
setting
10
Dis- Selection play
Energy consumption display
Ask your electricity supplier what the mains
voltage is.
Consumption display is switched off.1
Consumption display at mains voltage of
230 V.
Consumption display at mains voltage of
400 V.
Consumption display at mains voltage of
220 V.
Consumption display at mains voltage of
240 V.
Automatic timer – Switched off.1
– – Cooking time after which the hotplates switch off.
Duration of the timer end signal 10 seconds.1 30 seconds. 1 minute.
Activation of the heating elements
Switched off
Switched on
The last setting before switching off the
hotplate.1
Time for selecting hotplates Unlimited: The last hotplate selected can
always be adjusted without having to select it again.1
You can adjust the last hotplate selected within 10 seconds after selecting
it. After this time you have to select the hotplate again before adjusting it.
Resetting to the factory settings Switched off.1 Switched on.
1 Factory setting
13 Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to
clean and maintain it carefully.
13.1Cleaning products
You can obtain suitable cleaning products and glass scrapers from customer
service, the online shop or a retailer. ATTENTION! Unsuitable cleaning
products may damage the surfaces of the appliance. Never use unsuitable
cleaning products.
Unsuitable cleaning products ¡ Undiluted detergent ¡ Detergent intended for
dishwashers ¡ Abrasive cleaners ¡ Aggressive cleaning products such as oven
spray
or stain remover ¡ Abrasive sponges
Cleaning and servicingen
12.2Changing basic settings
Requirement: The hob is switched off. 1. Switch on the hob. 2. Within the next
10 seconds press and hold for
4 seconds.
3 45 67 8 9
a and flash alternately on the left-hand display. a lights up on the right-
hand display. 3. Touch repeatedly until the required indicator ap-
pears on the left-hand display. 4. Set the desired value on the control panel.
3 45 67 8 9
5. Press and hold for 4 seconds. a The setting is activated. Tip: To exit the
basic settings without saving, switch off the hob using . Switch the hob on
again and reset.
¡ High-pressure or steam jet cleaners
13.2Cleaning the glass ceramic
Clean the hob after every use to stop cooking residues from getting burnt on.
Note: Note the information on unsuitable cleaning products. Page 11
Requirement: The hob has cooled down. 1. Remove heavy soiling using a glass
scraper. 2. Clean the hob with a cleaning product for glass
ceramic. Follow the cleaning instructions on the product packaging. Tip: You
can achieve good cleaning results using a special sponge for glass ceramic.
11
enTroubleshooting
13.3Cleaning the hob surround
Clean the hob frame after use if dirty or stained. Notes ¡ Note the
information on unsuitable cleaning
products. Page 11
¡ Do not use the glass scraper. 1. Clean the hob frame with hot soapy water
and a soft
cloth. Wash new sponge cloths thoroughly before use. 2. Dry with a soft cloth.
14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting aftersales service. This will avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the
appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer
Service.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to
the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
WARNING Risk of burns! The hotplate heats up but the display does not work.
Switch off the fuse in the fuse box. Call the customer service.
WARNING Risk of fire! The hob switches off automatically and can no longer be
operated. It may switch on unintentionally at a later point. Switch off the
fuse in the fuse box. Call the customer service.
14.1Information on display panel
Fault None All displays flash
and the heat setting flash alternately. A signal sounds.
and audible signal
Cause and troubleshooting There has been a power cut. 1. Check the household
fuse for the appliance. 2. Check whether there has been a power failure by
trying other electrical appliances.
The control panel is wet or objects are lying on it. Dry the control panel or
remove the object.
Several hotplates have been used over a prolonged period at high power
settings. The hotplate has been switched off to protect the electronics. 1.
Wait a while. 2. Touch any touch field. a When the message no longer appears,
the electronics have cooled down sufficiently.
You can continue to cook.
Despite being switched off by , the electronics have become hot again. All
hotplates have therefore been switched off. 1. Wait a while. 2. Touch any
touch field. a When the message no longer appears, the electronics have cooled
down sufficiently.
You can continue to cook.
Hot pot near the control panel. There is a risk that the electronics will
overheat. Remove the pan. a The display goes out shortly afterwards.
Hot pot near the control panel. The hotplate has been switched off to protect
the electronics. 1. Remove the pot. 2. Wait a while. 3. Touch any touch field.
a When the message no longer appears, the electronics have cooled down
sufficiently.
You can continue to cook.
The hotplate was on for too long and has switched off automatically. You can
switch the hotplate back on again immediately.
12
Disposalen
Fault and hotplates do
not heat up
A message with “E” appears on the display, e.g. E0111.
Cause and troubleshooting
Demo mode is activated. 1. Disconnect the appliance from the power supply for
30 seconds by briefly switching off
the circuit breaker in the fuse box. 2. Touch any touch field within the next
three minutes.
The electronics have detected a fault. 1. Switch the appliance off and on
again. a If the fault was a one-off, the message disappears. 2. If the message
appears again, call the after-sales service. Please specify the exact error
message when calling. “Customer Service”, Page 13
15 Disposal
Find out here how to dispose of old appliances correctly.
15.1Disposing of old appliance
Valuable raw materials can be reused by recycling. Dispose of the appliance in
an environmentally
friendly manner. Information about current disposal methods are available from
your specialist dealer or local authority.
16 Customer Service
If you have any queries on use, are unable to rectify faults on the appliance
yourself or if your appliance needs to be repaired, contact Customer Service.
Function-relevant genuine spare parts according to the corresponding Ecodesign
Order can be obtained from Customer Service for a period of at least 10 years
from the date on which your appliance was placed on the market within the
European Economic Area. Note: Under the terms of the manufacturer’s warranty
the use of Customer Service is free of charge. Detailed information on the
warranty period and terms of warranty in your country is available from our
aftersales service, your retailer or on our website. If you contact Customer
Service, you will require the product number (E-Nr.) and the production number
(FD) of your appliance. The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our website.
16.1Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the
appliance’s rating plate. The rating plate can be found: ¡ on the appliance
certificate. ¡ on the lower section of the hob. Make a note of your
appliance’s details and the Customer Service telephone number to find them
again quickly.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
13
Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from: · Expert
tips & tricks for your appliance · Warranty extension options · Discounts for
accessories & spare-parts · Digital manual and all appliance data at hand ·
Easy access to Bosch Home Appliances Service Free and easy registration also
on mobile phones: www.bosch-home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair
from Bosch experts. Find out everything about the many ways Bosch can support
you: www.bosch-home.com/service Contact data of all countries are listed in
the attached service directory.
Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www
.bosch-home.com
9001599705
9001599705(011019) en
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom