Analogue Dock Pocket Charger User Guide
- June 6, 2024
- ANALOGUE
Table of Contents
Analogue Dock Pocket Charger
Analogue Dock is an amazing companion for Pocket. With Dock you can connect Pocket to your HDTV. Sync up any wireless 8BitDo Bluetooth or 2.4g controller directly to Dock for wireless play. Up to 4 player support. You can connect controllers directly via wired USB, too. Some features coming in OS v1.1
What’s in the box
- Analogue Dock
- Fast charging USB-C Power Supply HDMI cable
- USB-C cable
Adding your Dock to your Setup
Analogue Dock is designed to allow you to play your favorite handheld games
with Analogue Pocket on an external display or television with your USB,
Bluetooth or 8BitDo 2.4G controllers.
When Pocket is Docked, you can output video and audio via Dock’s HDMI port. To
use Dock, connect the power supply to the USB-C cable and the cable to Dock,
plug in the power supply and insert Analogue Pocket into the vertical USB-C
port on Dock. Dock has two USB ports which may be used for many USB
controllers. Dock may receive input from up to two Bluetooth controllers.
Additionally, Dock may receive input from up to two 8BitDo 2.4G controllers.
Dock will permit Analogue Pocket to be charged when connected to a power
supply. When you first wish to use Dock, Pocket should be turned on. After you
pair a controller, you can activate that controller (typically with the Start
button) to turn on Dock without having to press the power button on Pocket.
Upgrading Dock’s Firmware
In order to Upgrade Dock’s Firmware, you will need to copy the firmware update
file to a USB stick formatted with FAT32. Then insert the USB stick into one
of Dock’s two USB ports, power on Dock and a Firmware Upgrading bar will
display. If power is lost while firmware is updating, restart the firmware
updating process again after power is restored.
LED Status
- LED Blinking White Pairing
- LED Solid White Controller Paired
- LED Green Pocket Charging
Ports and Indicators
HDMI Port
Output video and audio from Analogue Pocket to your display or receiver.
USB Ports x 2
Plugin your USB controllers here
Power Port
Insert the USB-C Cable and connect it to the Fast charging USB-C Power Supply
to power Dock.
Pairing Button
Used primarily for manual pairing
Indicator LEDs
Indicate whether Player 1 – 4 is paired with Dock Pairing your Wireless
Controllers
- Dock will enter auto-pairing mode for P1, indicated on dock with blinking LED.
- Follow the instructions for your controller to enter its pairing mode*.
- Player indicator will become solid when a controller is paired, or wired controller connected to USB port.
- Enter Controllers menu to pair more, or change controller order.
- To manually pair a controller to Dock, press the pair button on the back of Dock until the indicator LEDs blink to enter pairing mode.
*8bitdo Bluetooth Controllers should be put in X-input pairing modes
Wired Controllers
Plug any hardwired USB controller that Dock supports into a USB port and it
will instantly connect to Dock. You can also use any supported wireless
controller as a wired USB controller by adapting it with a USB cable.
Controllers – Dock 1.0 Firmware Supported Controllers
- Pro 2 Bluetooth
- M30 Bluetooth
- 8BitDo Arcade Stick (Bluetooth, USB & 2.4 dongle)
- PS4
- Switch Pro
Pairing controllers to Dock
- Press the pairing button on the back of Dock .P1 LED indicator will start to blink. Dock is now in Pairing mode.
- Put your controller in pairing mode by pressing the pairing button.
- Your controller will pair to Dock.
*Pairing your PS4 controller: press and hold the PS button and Share button to enter pairing mode.
- If you experience any connectivity issues, please update your controller to the latest firmware at support.8bitdo.com
- All 8BitDo controllers must be in X INPUT mode.
