Analogue Enterprises AP-D01 Pocket Dock User Guide
- June 4, 2024
- ANALOGUE
Table of Contents
Enterprises AP-D01 Pocket Dock
User Guide
Analogue Dock User Guide
analogue.co
V1.3 July.2022
Play Pocket, on the big screen.
Analogue Dock is an amazing companion for Pocket. With Dock, you can connect Pocket to your HDTV. Sync up any wireless 8BitDo Bluetooth or 2.4g controller directly to Dock for wireless play. Up to 4 player support. You can connect controllers directly via wired USB, too.
What’s in the box
— Analogue Dock
— Fast charging USB-C Power Supply
— HDMI cable
— USB-C cable
Some features coming in OS v1.1 final.
Adding your Dock to your Setup
Analogue Dock is designed to allow you to play your favourite handheld games
with Analogue Pocket on an external display or television with your USB,
Bluetooth or 8BitDo 2.4G controllers. When Pocket is Docked, you can output
video and audio via Dock’s HDMI port.
To use Dock, connect the power supply to the USB-C cable and the cable to
Dock, plug in the power supply and insert Analogue Pocket into the vertical
USB-C port on Dock.
Dock has two USB ports which can connect and charge controllers. The dock may
receive input from up to two Bluetooth controllers. Additionally, Dock may
receive input from up to two 8BitDo 2.4G controllers.
Dock will permit Analogue Pocket to be charged when connected to a power
supply. Use the included USB-C cable and power supply to ensure optimal
operation.
When you first wish to use Dock, Pocket should be turned on. After you pair a
controller, you can activate that controller (typically with the Start button)
to turn on Dock without having to press the power button on Pocket.
Upgrading Dock’s Firmware
In order to Upgrade Dock’s Firmware, first, you must update Pocket’s firmware to Analogue OS v1.1beta or greater. Then plug Dock into its power source, turn on Pocket and place Pocket into Dock’s cradle. Pocket now incorporates Dock’s firmware and will automatically update Dock’s firmware to the version included with Pocket’s firmware. You will see an update bar on Pocket’s screen and any display connected to Dock. If power is lost while the firmware is updating, restart the firmware updating process again after power is restored.
LED Status
| 1 | LED Blinking White | Pairing |
|---|---|---|
| 2 | LED Solid White | Controller Paired |
| 3 | LED Solid Green | Dock Powered |
| 4 | LED Throbbing Green | Pocket Charging |
Ports and Indicators
HDMI Port
Output video and audio from Analogue Pocket to your display or receiver.
USB Ports x 2
Connect and charge your controllers here.
Power Port
Insert the USB-C Cable and connect it to the
Fast charging USB-C Power Supply to power Dock.
Pairing Button
Used primarily for manual pairing
Indicator LEDs
Indicate whether Player 1 – 4 is paired with Dock
Wired Controllers
Plug any hardwired USB controller that Dock supports into a USB port and it
will instantly connect to Dock. You can also use and charge any supported
wireless controller as a wired USB controller by adapting it with a USB cable.
Controllers – Dock 1.1 beta Firmware Supported Controllers
· Switch Pro (and variants)
· Switch Joycon
· Wiiu Pro
· Wiimote
• Xbox One
• PS3| • PS4
• PS5
• 8BitDo Pro 2
• 8BitDo Zero 2
• 8BitDo Lite
• 8BitDo Lite 2
• 8BitDo M30| • 8BitDo SN30
• 8BitDo SN30 Pro
• 8BitDo SN30 Pro+
• 8BitDo N30 Pro
• 8BitDo N30 Pro 2
• 8BitDo Arcade Stick
(BT & Wired USB only)| • 2.4g N30
• 2.4g N30 (Noir)
• 2.4g SN30
• 2.4g SN30 Classic
• 2.4g SF30
• 2.4g M30
• 2.4g M30 Classic
• 2.4g PCE
---|---|---|---
Pairing controllers to Dock
- Press the pairing button on the back of the Dock. P1 LED indicator will start to blink. The dock is now in Pairing mode.
- Put your controller in pairing mode by pressing the pairing button.
- Your controller will pair to Dock. The player indicator will become solid when a controller is paired, or wired controller connected to the USB port.
- Pair additional controllers from the OS menu or by repeating the above steps.
8bitdo Bluetooth Controllers should be put in X-input mode.
Pairing your PS4 controller: press and hold the PS button and Share button to
enter pairing mode.
2.4g controllers will require new firmware to work properly with Dock and will
disable compatibility with original NES, SNES, Genesis and USB controller port
receivers. The firmware update can be reverted by the same method indicated to
update the firmware.
+ If you experience any connectivity issues, please update your controller to
the latest firmware at support.8bitdo.com
+ For most recent 2.4g and Bluetooth firmware
support.8bitdo.com/analogue/Dock + All 8BitDo controllers must be in X INPUT
mode.
Refer to your 8bitdo controller’s manual for instructions on how to do this.
Resetting Dock
Resting will erase all paired controllers from the Dock. Plug the USB-C power into Dock. Wait 4 seconds then press and hold the pairing button until the LEDs begin to flash green. Release the button before the green LEDs turn off. If successful, all four Dock LEDs will flash red.
Controllers
Main system(s) default button mapping across compatible game controllers. All Bluetooth 8BitDo controllers need to be in X-Input mode before pairing.
| Menu| GBA A| B| L| R| ST| SE| GB/GBCA| B| ST| SE| Game1| Gear2| ST
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
8BitDo Controllers| | | | | | | | | | | | | |
Wireless 2.4g| | | | | | | | | | | | | |
N30| Home| A| B| –| –| ST| SE| A| B| ST| SE| B| A| ST
N30 Noir| Home| A| B| –| –| ST| SE| A| B| ST| SE| B| A| ST
SN30| ↓ + SE| A| B| L| R| ST| SE| A| B| ST| SE| B| A| ST
SN30 Classic| ↓ + SE| A| B| L| R| ST| SE| A| B| ST| SE| B| A| ST
SF30| ↓ + SE| A| B| L| R| ST| SE| A| B| ST| SE| B| A| ST
M30| Heart| B| A| L| R| ST| –| B| A| ST| –| A| B| ST
M30 Classic| Heart| B| A| L| R| ST| –| B| A| ST| –| A| B| ST
PCE| Heart| I| II| | | RN| SE| I| II| RN| SE| II| I| SE
Wireless Bluetooth
| Pro 2 | Heart | A | B | L | R | ST | SE | A | B | ST | SE | A | B | ST |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Zero 2 | ↓ + SE | A | B | L | R | ST | SE | A | B | ST | SE | B | A | ST |
| Lite | Heart | A | B | L | R | + | – | A | B | + | – | B | A | + |
| Lite 2 | Heart | A | B | L | R | + | – | A | B | + | – | B | A | + |
| M30 | Heart | B | A | L | R | ST | – | B | A | ST | – | A | B | ST |
| SN30 | ↓ + SE | A | B | L | R | ST | SE | A | B | ST | SE | B | A | ST |
| SN30 Pro | Heart | A | B | L | R | ST | SE | A | B | ST | SE | A | B | ST |
| SN30 Pro+ | Heart | A | B | L | R | ST | SE | A | B | ST | SE | A | B | ST |
| N30 Pro | Home | A | B | L | R | ST | SE | A | B | ST | SE | B | A | ST |
| N30 Pro 2 | Home | A | B | L | R | ST | SE | A | B | ST | SE | B | A | ST |
| Arcade Stick | Heart | A | B | L | R | ST | SE | A | B | ST | SE | B | A | ST |
| Menu | A | B | L | R | ST | SE | A | B | ST | SE | 1 | 2 | ST | |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Non 8BitDo Controllers | ||||||||||||||
| Wireless | ||||||||||||||
| Switch Pro | Home | A | B | L | R | + | – | A | B | + | – | B | A | + |
| Switch Joycon | Home | X | A | L | R | + / – | Joy in | X | A | + / – | Joy in | A | X |
+ / –
Wiiu Pro| Home| A| B| L| R| +| –| A| B| +| –| B| A| +
Wiimote| Home| 2| 1| B| A| +| –| 2| 1| +| –| 1| 2| +
PS3| PS| O| X| L| R| ST| SE| O| X| ST| SE| X| O| ST
PS4| PS| O| X| L| R| Opt.| Share| O| X| Opt.| Share| X| O| Opt.
PS5| PS| O| X| L| R| Opt.| Share| O| X| Opt.| Share| X| O| Opt.
Xbox One| Xbox| B| A| L| R| Menu| View| B| A| Menu| View| A| B| Menu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>