Cobra RX100 Two-Way Radio User Guide
- June 6, 2024
- Cobra
Table of Contents
- Making Life Easier And Safer
- Overview
- Icons
- Installing batteries
- The NOAA NWR Frequency Table
- Features
- IMPORTANT NOTICE:
- Safety Information for micro talk Radios
- Important
- Limited One-Year Warranty
- General Warranty Information
- Customer Assistance
- For Assistance In The U.S.A.
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Cobra RX100 Two-Way Radio
Making Life Easier And Safer
Staying in touch with your family and friends is convenient and easy when using your microTALK® radio. Some of the many uses you will discover include: Communicating with others while hiking, biking, and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall.
Overview
Icons
Installing batteries
The NOAA NWR Frequency Table
Channel No. | NWR Frequency | Channel No. | NWR Frequency |
---|---|---|---|
1 | 162.550MHz | 6 | 162.500MHz |
2 | 162.400MHz | 7 | 162.525MHz |
3 | 162.475MHz | 8 | 161.650MHz |
4 | 162.425MHz | 9 | 161.775MHz |
5 | 162.450MHz | 10 | 163.275MHz |
Features
- 22 Channels
- 10 Channels Weather Radio
- 121 Privacy Codes (38 CTCSS codes / 83 DCS codes)
- Hands-Free Operation (VOX)
- Scan Channels
- LCD Display
- Call Alert
- Button Lock
- Roger Beep Selectable On/Off
- Battery/Power Saver
- Keystroke Tones
- Battery Level Indicator
- Low Battery Audible Alert
- Auto Squelch
- Belt Clip
Maximum range may vary and is based on unobstructed line-of-sight communication under ideal conditions.
IMPORTANT NOTICE:
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1) This device may not
cause harmful interference, and 2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Safety Information for micro talk Radios
Your wireless handheld portable transceiver contains a low-power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices.
Important
FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Cobra accessories supplied or designated for this product. The use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized antennas, modifications or attachments could damage the transmitter and may violate FCC regulations.
Normal Position:
Hold the transmitter approximately two (2) inches from your face and speak in
a normal voice, with the antenna pointed up and away.
FCC Part 15.21 Warning Statement-
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
IC RSS-GEN
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device
Radiation Exposure Statement:
Under ISEDC regulations, this radio transmitter may only operate using the
antenna that is affixed to the radio transmitter. Use only the supplied
antenna. Unauthorized antennas, modifications, or attachments could damage the
transmitter and may void the user’s authority to operate the radio. Any
changes of modifications not expressly approved by the party responsible for
compliance could void the user’s ability to operate the equipment. SAR tests
are conducted using standard operating positions accepted by the FCC/ISEDC
with the device transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the device while operating can
be well below the maximum value. This device has been tested and certified to
not exceed the exposure limit established by the FCC/ISEDC. Tests for each
device are performed in positions and locations (e.g. at the ear and worn on
the body) as required by the FCC/ISEDC. For body worn operation, this device
has been tested and meets the FCC/ISEDC RF exposure guidelines when used with
an accessory designated for this product or when used with an accessory that
contains no metal and that positions the handset a minimum of 10mm from the
body. Non-compliance with the above restrictions may result in a violation of
RF exposure guidelines.
Limited One-Year Warranty
Cobra warrants your product against all defects in materials and workmanship
for a period of one (1) year from the date of original purchase. Cobra, at our
sole discretion, will repair or replace your product (with the same or
comparable product) free of charge. Cobra will not pay shipping charges that
you incur for sending your product to us. Products received COD will be
refused.
To make a warranty claim, we will require proof or purchase in the form of an
invoice or receipt. No proof of purchase is required for factory direct
purchases.
Warranty Exclusions: Warranty does not apply to your product under any of the following conditions: 1. The serial number has been removed or modified. 2. Your product has been subjected to misuse or damage (including water damage, physical abuse, and/or improper installation). 3. Your product has been modified in any way. 4. Your receipt or proof-of-purchase is from a non- authorized dealer or internet auction site including E-bay, U-bid, or other non-authorized resellers.
LIMITATION OF WARRANTY: EXCEPT AS EXPRESSLY PROVIDED HEREIN, YOU ARE ACQUIRING THE PRODUCT “AS IS” AND “WHERE IS”, WITHOUT REPRESENTATION OR WARRANTY. COBRA SPECIFICALLY DISCLAIMS ANY REPRESENTATION OR WARRANTY INCLUDING, BUT NOT LIMITED TO THOSE CONCERNING THE MERCHANTABILITY AND SUITABILITY OF THE PRODUCT FOR A PARTICULAR PURPOSE. COBRA SHALL NOT BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR MOUNTING OF THE PRODUCT.
The above limitations or exclusions shall be limited to the extent they violate the laws of any particular state. Cobra is not responsible for products lost in shipment between the owner and our service center.
General Warranty Information
Each product we manufacture is covered by our factory warranty. While each
product may have unique components and policy, the general guideline below
will apply to most Cobra products.
All Cobra products purchased factory-direct or from our Authorized Resellers
will come with a full one to three (1-3) year warranty from the date of the
original retail purchase (see policy statement above for full warranty details
and exclusions). Standard accessories packaged with each model will have a
one-year factory warranty. Accessory items have a one-year factory warranty.
Shipping to our facility is not covered in our warranty. Return shipping is
included within the US. This warranty is non- transferrable. For the sake of
clarity, ‘repair or replace the Product or its defective part’ does not
include removal or installation work, costs or expenses which include but are
not limited to labor costs or expenses. Cobra will not be responsible for lost
packages.
Customer Assistance
In this user’s guide, you should find all the information you need to operate your microTALK® radio. If you require further assistance after reading this guide, Cobra offers the following customer assistance services:
For Assistance In The U.S.A.
Product Service:
For any questions about operating or installing this new Cobra product, PLEASE
CONTACT COBRA FIRST… do not return this product to the retail store. The
contact information for Cobra will vary depending on the country in which you
purchased and uses the product. For the latest contact information, please go
to www.cobra.com/support or call
1-800-543-1608. If your product should
require factory service, please go to
www.cobra.com/support and follow the
instructions.
For Products Purchased Outside the U.S.A.
Please contact your authorized local reseller or agent for warranty information.
Trademark Acknowledgment
©2022 Cobra Electronics Corporation. Cobra and the snake design are proprietary trademarks of Cobra Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>