SOLTECH FOCUS 10W Sign Lights Installation Guide

SOLTECH FOCUS 10W Sign Lights

SOLTECH Provides Advanced LED
Technology Powered With Eco-friendly,
Clean, Solar Energy.

Introduction

Thank you for purchasing FOCUS Urban Lighting Products.

Important
Please read these instructions before installation to ensure optimum results and longevity of your lights. The solar panel should be charged in full sunlight for 8 to 9 hours before initial first use to provide optimum results.

Features

• Easy installation— no electrical wiring required with integrated design.
• Turns on automatically at night and off during the day.
• The lights include an On/Off switch and built in battery.
• The battery can support 5–6 nights with cloudy days.
• When fully charged, lights will operate up to 5 nights.
• Intelligent power saving mode increases light duration x 1.5 times.
• IP65 water and dust resistant.

How the Solar Panel Works
During the day, the solar panel converts sunlight into electricity to charge the battery. At night, the lights turn ON automatically using the electricity stored in the battery. The performance of the solar lights is dependent on the location of the solar panel and/or weather conditions. Install the solar panel in a sunny position ensuring it receives 6–8 hours sunlight each day.
Reduced sunlight will reduce continuous working hours at night. Please note: during continuous wet & overcast days, lighting time may be reduced as the battery will not be fully charged.
The lights may stop working during longer rainy periods of more than 5 days & will return to normal function when the sun returns. After an extended period of poor weather restore the battery power by turning the unit off and, fully charge the battery for 8 hours in full sunlight. To test the light during daylight hours, fully cover the solar panel and press the main power button.

Please Note
During continuous rainy or cloudy days, run time may be reduced as the battery will not be fully charged.

Specification

brightness till dawn

| First 4 hours 100% brightness, 25%

brightness till dawn

Operating Temperature| -4 °F to 149 °F| -4 °F to 149 °F
Charging Temperature| 32 °F to 113°F| 32 °F to 113°F

Ordering Information Chart

SERIES

| ****

WATTAGE

| COLOR

TEMPERATURE

| MOUNTING OPTIONS| ****

SIZE

---|---|---|---|---

STL-JUP =FOCUS

| ****

10 =10W 1000 Lumens

20 =20W 2000 Lumens

| ****

4 =4000K

5 =5000K

| ****

ST =GROUND MOUNT

| ****

13 =13 INCHES

26 =26 INCHES

Installation

GROUND MOUNT

GROUND MOUNT—For Grassland & Soil

If you want to install the FOCUS on grassland and soil, you need a SPIKE accessory.

1. Attach the SPIKE to the Mounting Stand and secure with four screws.
2. Press it into the grassland or soil.

The FOCUS packaging does not include the spike, please place the order separately.

TIP
Use one bolt to set height, then tighten rest of the screws.

NOTES

1. All screws and bolts must be tightened firmly.
2. Only press the main power button once. The light will operate automatically at night.
3. Please charge the product for 6–8 hours before use.

Luminous Distribution

Warranty

FOCUS is covered by a 3 year limited warranty. SOLTECH urban light warrants to the original purchaser that this product is free from defects in materials and workmanship
for the period of 3 years from date of purchase. To obtain warranty service please contact your local distributor or sales rep for further instruction.

SOLTECH Provides Advanced LED Technology Powered With Eco-friendly, Clean, Solar Energy.

1460 Park Avenue.
Emeryville, CA 94608 USA
www.soltechlighting.com

SOLTECH LLC reserves the right to update all
product data sheets at any time. Consult SOL TECH
marketing specialists for publication updates at hello@soltechlighting.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>