Tomstar TS18 Bluetooth call Smart Watch User Manual
- June 6, 2024
- Tomstar
Table of Contents
User Manual
SMART BRACELET
Downloading the App
Scan the following QR code, download, and install the App.
Scan QR Code and Download
Button function:
up button: long press to turn on/off function; short press to return to the
previous menu function Down button: Button on the lower side, short press to
enter the music playback function; long press to quickly enter the call-
related functions
Charging and Active
Charging the device to act before the first time using; To charge your device, plug the charging cable into the adapter or USB port on your computer.
Pairing
Open the App and set up your profile
Go to the device, Click rAdd a Device] Choose your device on the scanning list
The MAC address on the “Setting”-“About” page could help you identify your
device on the scanning list.
Use the Touch Screen
Phone Call
After connecting the SmartWatch to the phone, you can use the watch to dial to control the phone for making calls and answering the phone calls. You can also view the call history of the watch. You need to keep the connection between the watch and the phone stable when using the Phone Call function.
SmartWatch Features
Sleep
If you keep wearing Smart Watch in your sleep, it can provide the hours slept
and quality of sleep stats on both the screen and the APR
NOTE: Sleep stats reset to zero at 8:00 pm.
Heart Rate Test
The SmartWatch could record your heart rate all day. You also could tap on the
page to start measuring heart rate.
Sports
Smart Watch automatically tracks Steps taken on the screen.
NOTE: Your movement stats reset to zero at midnight.
Training
Tap the training icon on the menu to start a new training measure recording,
there are 8 sport modes to be chosen. The last training recording will be
shown on the training page.
Blood Pressure Test
Tap on the blood pressure page to start measuring your blood pressure. On the
blood pressure page, It can show the blood pressure measurement data of the
last times.
Sp02 Test
Tap the Sp02 page to start measuring your SpO2. On the SpO2 page, It can show
the Sp02 measured data of the last times.
Weather
It could show the weather info of current and tomorrow on the weather page.
Weather info is synced after connecting with the APP, it will not be updated
after a long disconnection.
Messages Reminder
The device can sync incoming notifications from Twitter, Facebook, Whatsapp,
Instagram, etc. Recently 5 messages can be stored.
Note: You can switch off/off the incoming notification in the APP
Remote Shutter
After connecting the device, you can remote control the camera on your phone.
Player Shutter
After connecting the device, you can remote control the music player on your
phone.
Other Features
Other features include a stopwatch, alarm, timer, brightness, mute on/off,
theater mode, factory reset, power off, and about.
StopWatch Tap the start button on the stopwatch page to start timing and tap the stop button to stop timing.
Silent Alarms
Set up the alarm on the APP, the device will vibrate to remind on time.
Theater Mode
The device will turn off the vibration and turn down the brightness when the
theater mode is turned on.
Note: You can turn on/off the theater mode in the control center.
Remind to Move The device will vibrate to remind you to make a relax
after 1-hour sitting.
Note: You can switch on/oft the feature in the APR
Remind to Drink
The smartwatch will remind you of “Time to Drink Some Water” at the planned
drinking time.
Note: You can set the feature in the APR
Getting to Know Your Device
-
Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout. NOTE: Do not swim with your Smart Bracelet. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using Quick View
With Quick View, you can check the time or the message from your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.
General Info & Specifications
-
Environmental Conditions
Operating temperature: 14°F to 122°F (-10°C to 50°C)
Non-operating temperature: -4°F to 140°F (-20°C to 60°C) -
Size
Fits a wrist between 5.5 and 7.7 inches in circumference. -
01sposal and Recycling
Please kindly be aware that it is the consumer’s responsibility to properly dispose and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility. For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>