TomStar SB001 Smart BP HR Bracelet User Manual
- June 8, 2024
- Tomstar
Table of Contents
TomStar SB001 Smart BP HR Bracelet User Manual
Requirement of phones
Before Use
Please make sure that the electricity of the wristband is sufficient before your first use. If the electricity is too low to boot up, please charge for it first.
Download “LEFUN HEALTH” APP
Method 1: Scan the QR code (For Android users)
Method 2: Search “LEFUN HEALTH” from Apple Store or Android Market
Bind APP
Long touch the key to boot up, please make sure the BT of your phone is open Open “LEFUN HEALTH” APP in your phone Click the menu bar on the top left corner Click “Device name / connection status” Choose MAC IMEI which matches with your band.
Smart Band Operation
After the wrist band is connected successfully, it will sync the time and date from your phone.
APP can sync the motion state, such as Pedometer, Sleep monitor, Heart rate monitor, Blood pressure, etc.
Functions
- Home page: Display time, date and power, etc
- Smart alarm clock: Set clock in APP, it will shake to remind in time.
- Pedometer: Count your steps in a day, clear in 24 hours automatically, you can check the history steps in APP.
- Calories: Count the consumption of calories, clear in 24 hours automatically, you can check the history in APP.
- Temperature measurement: when the function reaches the temperature interface, the measurement results will be automatically jammed and transmitted to the APP for saving.
- Mileage: Count the mileage, clear in 24 hours automatically, you can check the history in APP.
- Heart rate monitor: Switch to the interface of Heart Rate Monitor, it will test automatically, and save the dates in APP.
- Blood Pressure Monitor: Switch to the interface of Blood Pressure monitor, it will test automotionly, and save the dates in APP.
- Sleep Monitor: Open the function of sleep detection in Band, detect your sleeping status in 24 hours. Save the dates in APP.
- Sedentary reminder: In “Band function setting”, Turn on the function of Sedentary reminder and setting the time, it will shake in time.
- Drinking remind; In “Band function setting” Turn on the function of drinking reminder and setting the time, it will shake in time.
- Smart anti-lost: In “Band function setting”, Turn on the function of smart anti-lost, band will shake when the phone is over the distance of bluetooth
- Message notification: After match successfully, when the phone receive the message of QQ, wechat, SMS, the band will bright and shake.
- Incoming call remind: After match successfully, when there is incoming call, band will show the contact message to remind.
- Shake for selfies: In “Band function setting”, open this function, then click “Shake for selfie” in menu bar, shake the band to take photo.
- Search device: Click “Search device” in the menu bar, band will shake to remind.
The company reserves the right to make changes to the specification without notice.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>