FrSky FAS40 ADV Smart Port and FBUS 40A Capable Current Sensor Instruction Manual
- June 6, 2024
- Frsky
Table of Contents
Instruction Manual for FrSky
Current Sensor — FAS40 ADV
Introduction
Note: All instructions, warranties, and other collateral documents are subject to change at the sole discretion of FrSky Electronic Co., Ltd. For further information, please visit www.frsky-rc.com and click the support tab for this product.
Thank you for purchasing FrSky Current Sensor – FAS40 ADV. It is designed for FrSky Smart Port enabled system, and can measure Current (A) and Battery Voltage (V) when connected between a Battery and ESC. In order to fully enjoy the benefit of it, please read the instruction manual carefully and set up the device as described below.
Specifications
- Dimension: 65.24×15.7×16.6mm (L×W×H)
- Weight: 16g
- Measurement range: 0~40A
- Current consumption:16mA@5V
- Maximum safe current: 40A
- Maximum battery voltage: 6S
- Compatible: Receivers with Frsky Smart Port or FBUS function
- Connector: XT60 Anti spark
Protocol switching
Connect the output port of the sensor to the receiver, select Smart Port or FBUS on the receiver setup screen, the sensor will automatically recognize.
Set-Up
FrSky Current Sensor – FAS40 ADV is compatible with FrSky Smart Port or FBUS enabled receivers. For more details, please refer to the corresponding receiver instruction manual.
Warning: Install FrSky Current Sensor – FAS40 ADV on any appropriate
surface of the airframe that stays away from water, vibration, or fuel.
Other FrSky S.Port or FBUS enabled sensors to include new Smart Port or FBUS
enabled Variometer Sensor, GPS Sensor, RPM Sensor, Airspeed Sensor, and so on.
ID Set-Up
Each type of FrSky sensor has its unique physical ID. The default physical ID for this sensor is 02. The ID number could be changed by Free Link (Windows/android/ios)
Note: All sensors could daisy chain with each other through their Smart Port or FBUS.
LED Status
The Battery and ESC should be connected to the BAT port and ESC port correspondingly and make sure the polarity is correct. FrSky is not responsible for any damage caused by the wrong polarity connection.
| LED Status | S.Port | FBOs |
|---|---|---|
| Flash slowly | YES | NO |
| Flash quickly | NO | YES |
FrSky is continuously adding features and improvements to our products. To get the most from your product, please check the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals
FrSky Electronic Co., Ltd. www.frsky-rc.com
Contact us: frsky@frsky-rc.com
Add: F-4, Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi,
214125, Jiangsu, China Technical Support:
sales4tech@gmail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>