OZBOUN TV-XM-Q20-4MP Smart Bird Feeder User Manual
- June 15, 2024
- OZBOUN
Table of Contents
OZBOUN TV-XM-Q20-4MP Smart Bird Feeder User Manual
Step 3 Confirm configuration result
After configuration is successful, jump to device list page , click the device
to open real-time view live or device setting. If you have any other questions
can check in app- online services shown in Figure 7.
Step 4 Cloud Storage I Bird Recognition
Click on the “Bird” icon to enter the Cloud Service store in Figure 8,Purchase
the cloud storage services. that can identify more than 1 OK species of birds
and save more than 3-day Loop Alarm record. Now you can experience one month
for free. If the bird comes, the camera will automatically recognize and save
the video to the cloud. and you will receive a message. Click on the “Cloud
Event” icon to see the bird’s video and Wikipedia’s introduction to the bird.
FAQ
Q: How to save camera recordings?
A: I. Local TF card storage, maximum to 128G. when TF card is full, auto
delete older videos, loop record video.
2.Recommend cloud storage, Alarm video storage to cloud server, real-time push
alarm small video, safe and reliable, you can learn more on APP cloud service
page.
Q: What should I do if forget device password?
A: restore factory setting, reconnect and set new password
Note: The access password involves privacy and security, please treat it with
caution
Q: What should I do if can’t connect to camera or abnormal offline in use?
A: 1.check if camera battery is charged and if the router network is normal
2. Press and hold the power button to power off and restart the camera
3. restore factory setting(Press and hold the reset button for 6 seconds
until you hear “Restoring to factory settings, do not power off and release
it), follow instructions to re-add device
Q: Does it support SG band routers?
A: If SG band and 2.4G band of your router are the same SSID, you can connect
directly. If SG band and 2.4G band are not the same SSID(2SSIDs, SG band is
XXXXX-SG,2.4G band is XXXXX-2.4G), Please connect WIFI of phone to 2.4G
SSID(XXXXX-2.4G) of router, then configure camera
⚠ Notice
- Please modify the username and password when the product start up in order to protect the privacy.
- Please do not install device in places which is humid, full of dust or accessible to children.
- Please make sure the application or storage environment is in suitable humidity and temperature range. Please do not disassemble it randomly.
Special explanation:
- The actual products shall govern. Manual is for reference.
- APP and device firmware will be updated irregularly. Please update online as needed
- If there is any inaccurate item or function explanation mistake or typographical error, please refer to our company explanation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’ s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.