KINGJOY C86M Professional Carbon Fiber Tripod for Digital Camera User Manual
- June 6, 2024
- KINGJOY
Table of Contents
KINGJOY C86M
User Manual
The product user guide contains product features, how to use them, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Cautions:
| Do not exceed the tripod’s maximum load capacity.
---|---
Ensure the center column is locked.
Do not operate this tripod when the temperature is below -20⁰C or above 70⁰C.
It is not commended to operate in saltwater.
Do not put this tripod in sunlight or leaned it against the glass of the car
for a long time.
Do not leave this tripod unattended in public places; please be careful when
use in dangerous places.
Remove the camera from the ballhead during setup or transport.
It is not necessary to equip lubricant. Please use standard lubricant or
grease when necessary.
For your safety, keep it out of power supply.
Product Illustration
-
Tripod Introduction. (Illustration 1)
-
Tripod Set-up
Pull out the release buckle and turn over the leg outward for different tripod angle adjustments. (Illustration 2,3) -
Leg Section Extension and Fold
Loosen the twist lock to extend/fold the flag, tighten the twist lock to lock the leg. (Illustration 4) -
Take Out the Head Mount Plate
Loosen the plate locking knob to take out the head mount plate. -
Accessories Connection
3/8” 1/4” screw holes can be connected with the accessories with the same interface, such as magic arm, flashing light and external stand, etc. -
Tripod loading plate disassembly and video head assembly.
Anticlockwise rotate the handlebar to release and take out the loading plate, put the video head in the bowl, clockwise rotate the handlebar, vide head can be locked. (Illustration 5)
KINGJOY-VT3530M
-
(Illustration 1) VT-3530M head
-
Quick release plate taking out
(Illustration 2) Loosen the quick-release plate by twisting the knob. (Illustration 3) A quick release plate can be taken out by pressing the button knob. A wide quick release plate can ensure the complete touch with the equipment, which enhances the stability. (There is a security device with a quick release plate. The plate will not drop off even though the knob is unlocked. In the condition of unlocking, you can front- back slide the quick release plate to adjust the equipment balance, which length is about 7cm.) -
Mounting head on a tripod
(Illustration 4) Mount the head thread hole onto the tripod screw, rotate it till the head completely touches with the tripod loading plate. -
Tilting and rotating
(Illustration 5) Loose the knob, the head can be tilted. On the contrary, lock the head. Speedy shooting and super locking force, it can make sure the equipment’s safe and stable. -
Dynamic Balance
As the pic shows, rotate the balance knob, the head tilts back to the balance position automatically. On the contrary, rotate the balance knob, the balance gear function disappears. -
Horizontal rotating
(Illustration 6) Loose the lock, the head can be 360° horizontal rotated. On the contrary, lock the head. -
Handle installing and position changing
(Illustration 7) Install the handle on one side of the head, lock it until it is fixed. If you want to change the handle position, negative direction unscrew the knob, adjust the handle direction, then install it on the other side of the head, screw it as the direction shown.
Warnings:
| Do not exceed the head’s maximum load capacity. (Please refer to the specs
of stickers which is on the color box.)
---|---
Ensure that the head base is locked when necessary.
Do not operate this tripod when the temperature is below -20⁰C or above 70⁰C.
It is not commended to operate in saltwater.
Do not put this head in sunlight or leaned it against the glass of the car for
a long time.
Do not leave this head unattended in a public place; please be careful when
using it in a dangerous place.
Remove the camera from the head during setup or transport.
It is not necessary to equip lubricant. Please use standard lubricant or
grease when necessary.
For your safety, keep it out of power supply.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person, or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage, and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>