MASTECH MS8910 SMD Tester User Guide
- June 6, 2024
- MASTECH
Table of Contents
700019335 Nov 2021 Rev.2
Specifications are subject to change without notification.
**Quick Start Guide
**
MS8910
SMD Tester **
1 YEAR
LIMITED WARRANTY
**
The special attention should be paid when using the test and measurement
instrument because improper usage may cause electric shock and damage the
equipment.
– Use proper measurement category (CAT), voltage, and amperage rated probes,
test leads, and adapters for the measurement.
– Do not use or store the device around explosive gas, vapor, or under high
temperature and humidity.
– When handling the test probes and crocodile clips, keep your fingers behind
the physical guard.
– Examine the measuring test leads (if present) before use. Any element of
which the insulation deteriorates (even partially), replace them with proper
functional test leads.
– Connect the common test lead before the live test lead and remove the live
test lead before the common test lead.
– Before measuring current, make sure the instrument fuses available and
disconnect the power supply to the circuit test
– Remove the batteries if the device is not used for an extended period of
time, or if stored in temperatures above 45 °C. If the batteries are not
removed, battery leakage can damage the device.
**Contents
**
Specifications
| Range| Resolution| Accuracy
| 300Ω| 0.1Ω| ±(1.0%+2)
| 3nF| 1pF| ±(2.0%+3)
±(3.0%+3)
EMMA
MGL HUMAN S.L.
C/ Picu Castiellu, Parcelas i1-i4 33163Argame Morcín, Asturias, Spain
Tel: +34 985-08-18-70
Email: [email protected]
http://www
.mastech-group.com/support.php?n=0
SKU Number: MS8910CBGLO
Documents / Resources
|
MASTECH MS8910 SMD
Tester
[pdf] User Guide
MS8910, SMD Tester, MS8910 SMD Tester, Tester
---|---