xiaomi G10 Vacuum Cleaner User Guide
- June 6, 2024
- Xiaomi
Table of Contents
xiaomi G10 Vacuum Cleaner
Mi vacuum cleaner G10 quick start guide
how to install
charging
how to use
Setting Language
Press and hold the button O for 3 seconds to open the language list, then
press the button Oto scroll through the language to select the desired one.
Press and hold the button O for 2 seconds to use the selected language.
Note: The display screen will go off if there is no operation for more than 10
seconds.
Switching Suction Levels
Press the button O to switch suction levels of eco, standard/auto, and high
power. The corresponding suction level will be highlighted on the display
screen. Only when using the smart high torque brush bar, the auto mode will be
activated and the notification of “Auto” will appear on the display screen.
The vacuum cleaner will then automatically switch the suction level between
the floor/tile and the carpet.
Note: Stop the vacuum cleaner at any time while cleaning, and it will
continue to use the last selected suction level when started again.
Working Modes
-
Non-continuous Mode
Hold down the power button to start the vacuum cleaner, then release to stop it.
-
Continuous Mode
Press the button oto enable Continuous Mode, then press the power button to turn the vacuum cleaner on. To exit Continuous Mode, press the button 6.
notes
In Continuous Mode, the vacuum cleaner will enter into standby mode when
pressing the power button, and resume running if pressing the button again.
When the vacuum cleaner keeps in standby mode for more than 10 seconds, its
display screen will go off and the vacuum cleanerwi!! then exit the Continuous
Mode.
cleaning
Washable Parts
These parts must be separated from the vacuum cleaner or assembly prior to
cleaning. Make sure the washed parts are thoroughly dry for at least 24
hours.
Warning: Only the above parts are washable, the rests and the vacuum cleaner itself are non-washable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>