ORBEA M10 Rise 2021 Bicycle User Guide

ORBEA M10 Rise 2021 Bicycle

TURNING RISE ON/OFF

• To turn Rise on, press and hold the seat tube power but-ton for one second.
  

• To switch Rise off, press and hold the seat tube power button for one second.
  

CHANGE BETWEEN ASSIST MODES

Press the buttons X or Y of the handlebar remote switch Shimano SW-EM7000 or SW-EM800. Press X to increase the assist mode up to the maximum available (Boost). Press Y to decrease the assist mode down to the No-Assist mode (Off).

CURRENT ASSIST MODE DISPLAY

When changing the assist mode, the current mode will be visible on the Shimano EW-EN100 junction (assemblies without display), on the SC-EM800 display (option) and/or your compatible Garmin unit with the Orbea RS Toolbox data field installed and connected to Rise.
Read the Orbea RS Toolbox section of this guide and the 2021 Rise Bluepaper to download, unlock and install Orbea RS Toolbox on your compatible Garmin device.

WALK ASISST

To activate Walk Assist, press the EW-EM800 / SW-E7000-L remote lever button Y for 1 second until the word WALK appears on the EM800 display or the LED2 of the EN100 junction shows a blue light.
Release the Y button and press it again to engage Walk Assist. The system will help you push the bike along as long as the Y button is pressed.

CHARGING THE BATTERIES

ORBEA RS INTERNAL BATTERY

To charge the internal battery on Rise, plug the RS charger to the mains outlet. With the charger not being connected to the bicycle the LED on the charger’s body will blink in green.
Open the charging port cover on the bicycle and connect the charger to Rise. The LED on the charger’s body will show a permanent red light while the battery is being charged.

When the battery is fully charged, the charger’s LED will blink in green to let you know that the charge is completed.
Disconnect the charger from the bicycle’s charging port by pressing on the lower tab of the charging port and carefully pulling from the charger’s cable. Make sure the charging port’s cover is correctly closed.
While the charger is connected to Rise, the bicycle cannot be powered on.

ORBEA RS RANGE EXTENDER

To charge the Range Extender, plug the charger to the mains outlet. With the charger not being connected to the bicycle the LED on the charger’s body will blink in green.
Remove the Range Extender connection cable from the Range Extender charging point by pressing on the lower tab of the charging port and connect the charger to the Range Extender.
The LED on the charger’s body will show a permanent red light while the battery is being charged.
When the battery is fully charged, the charger’s LED will blink in green to let you know that the charge is completed.
While the Range Extender is charging, the charge level indicator LEDs will show the current battery level.
When the battery is fully charged, disconnect the charger by pressing on the lower tab of the charging port and carefully pulling from the charger’s cable.

CHECKING THE BATTERY LEVEL

SHIMANO EW-EN100 JUNTION

With the bicycle on, the Shimano EW-EN100 junction will show in the LED1 the remaining battery charge of the battery(ies). The LED1 will display a green light until the battery charge is below 21%, after which the LED1 will show a red light. When the battery is almost depleted, the LED1 will blink in red.

SHIMANO SC-EM800 DISPLAY (OPTION)

In assemblies with the Shimano SC-EM800 display, the battery(ies) charge level will be shown on the screen.

COMPATIBLE GARMIN UNITS. ORBEA RS TOOLBOX

The Orbea RS Toolbox data field for Garmin units allows you to access relevant information of your Rise, like the remaining battery level, which is shown as a percentage of the total capacity of the system.
If during an activity the battery level is not visible on Orbea RS Toolbox, the battery level percentage will be visible again when the battery level drops by 1%. At that moment, the EP8 system will communicate the battery level via ANT Private to the Garmin unit and the battery level will be displayed.
Read how to download and install the Orbea RS Toolbox data field on your compatible Garmin unit in the dedicated section of this manual

ORBEA RS BATTERIES

Press and hold for 1 second the main button of the Orbea RS battery (internal battery or Range Extender) for the remaining battery level to be displayed.
The LED lights will show the remaining charge in 25% increments.

EW-EN100

ORBEA RS BATTERIES

SC-EM800

ORBEA RS TOOLBOX

SHIMANO ETUBE PROJECT APP. CUSTOMIZE YOUR RISE

Using the Shimano Etube Project app for smartphones, you can customize the EP8 RS system to adjust Rise to your needs.
Every assist mode can be modified to deliver the exact power for your riding style.
The EP8 motor also allows the selection of two different assist profiles. Within each profile, the power output of each assist mode can be modified to achieve the power that you need in every situation.
The assist profile 1 is designed for activities with less steep climbing, slightly reducing the power delivery for a greater available range.
The assist profile 2 is designed for more demanding activities and steeper climbs, delivering more power from the motor.
Consult the complete Etube Project app manual on Shimano’s website. Etube Project also lets you customize the remote levers buttons, view error reports, update the components firmware, amongst other functions.
Read the complete app manual here: https://si.shimano.com/#/en/iUM/7J4MA
Download and install Etube Project on your smartphone from Google Play or the Apple Store.
You can also read on how to change the assist profiles and modify the assist modes on the 2021 Rise Blue Paper technical manual.

ORBEA RS TOOLBOX. DATA FIELD FOR GARMIN COMPATIBLE UNITS

INSTALL AND UNLOCK ORBEA RS TOOLBOX ON GARMIN DEVICES. GARMIN CONNECT

APP

Orbea RS Toolbox is an app for Garmin compatible devices exclusive for Rise owners. It is added to your Garmin device as a data field and allows you to access relevant information of your Rise while riding.

NOTICE
The following method describes how to install and unlock Orbea RS Toolbox on your Garmin device using the smartphone app Garmin Connect through a Bluetooth connection. You use the same procedure on your PC or Mac using Garmin Express, connecting your device to your computer using an USB cable.

NOTICE
To unlock Orbea RS Toolbox on your Garmin device, you must have registered your new Rise’s barcode on Orbea’s website, which also lets you enjoy the Life Warranty on your new frame. Go to Orbea’s website and register your bike’s barcode, creating an account first if you do not have one yet.

www.orbea.com/es-es/access-register

Your bicycle’s barcode is an 11-digit code you will find on the bicycle’s frame:

1. After you have registered your Rise on Orbea’s website, open the Garmin Connect app on your smartphone and connect your device via Bluetooth.
   You can download and install Garmin Connect for Google Play or Apple Store.

2. Select “Activities and App Management”.

3. Select “Data Fields”.

4. Select “Get More Data Fields”.

5. Search “Orbea RS Toolbox” in the Garmin IQ Store. Select Unlock Orbea RS Toolbox.
   NOTICE: If you cannot see the app Orbea RS Toolbox in the IQ Store, your device is not compatible with the app. We are working to include new devices every day, contact Orbea if you need more information.

6. A message will inform you that you are about to leave the IQ Store. Accept to be redirected to Orbea’s activation website.
   

7. Input your login details to your Orbea account.

8. If you had already registered your Rise barcode, a message will inform your Garmin device has been unlocked.

9. Go back to Garmin Connect on your phone. You will notice that the Unlock button is still visible on the Orbea RS Toolbox screen. Type again Orbea RS Toolbox on the search field of Garmin Connect and select Toolbox. Now the Unlock button will have disappeared and only the Download button will be visible.
   Download Orbea RS Toolbox. A message will inform you that the app will be installed the next time you synchronize your device.

10. Go to Garmin Connect on your smartphone and synchronize your Garmin device with the app.

11. Go to “Activities and App Management > Data Fields” You will see Orbea Toolbox installed on your device.
    If Toolbox is visible but it is not installed, synchronize your device.

ENABLING ORBEA RS TOOLBOX IN YOUR DEVICE

After downloading and unlocking Toolbox through Garmin Express (PC or Mac) or Garmin Connect (smartphones) and synchronizing your Garmin unit, activate the visualization of the data fields in your device.
Below is shown the method to see the Toolbox data field on both Garmin Edge and watches compatible units.

NOTICE
Orbea RS Toolbox is not compatible with the use of the Garmin Edge Shimano STEPS native app on Edge 530, 830, 1030, and 1030 Plus devices. Disconnect or delete your bicycle from the sensors list of your Edge unit before trying to connect Orbea RS Toolbox before each use. This limitation does not come from Toolbox, but from Garmin.

1. Turn on your Rise and the unit you have installed Orbea RS Toolbox on, they will pair automatically.

2. Access Activity Profiles from the Settings menu in your device and choose the profile you want to use Rise with.
   

3. Select “Data Fields” and the page of the activity profile on which you want to see the data from your Rise. Enable the data page and choose to see one data field on the page.
   

4. Scroll through the data to be seen on the screen. Select Connect IQ and choose Orbea RS Toolbox.
   If you had not connected your Rise before setting up Toolbox on your device, the unit will show the message “Searching…” after selecting the Orbea RS Toolbox data field. When you turn on your bicycle and access the page where you chose to see Toolbox, the data from your Rise will be visible.
   

5. With Rise turned on, access the activity profile on which you selected to see the data from Toolbox or start re-cording an activity on this profile with your Garmin unit. Navigate to the page you selected to see Toolbox on to access the real-time data from your Rise.
   

EXTERNAL BATTERY RS RANGE EXTENDER

The Orbea RS Range Extender connects to Rise to add 252 Wh of extra capacity to the system, bringing the total capacity, together with the internal battery, to 612 Wh.
Thus, the Range Extender will extend the range of Rise by 70% when compared to the range achieved with the internal battery only.

RANGE EXTENDER TECHNICAL SPECIFICATIONS

• VOLTAGE: 36V
• CAPACITY: 252 Wh
• WEIGHT: 1.4 Kg
• CELLS: LITHIUM-ION. 18650
• CHARGING TIME (2A): 3.5 HOURS
• ASSEMBLY: DEDICATED BOTTLE HOLDER MOUNT ON DOWNTUBE
• CONNECTION: RANGE EXTENDER CONNECTION CABLE TO RISE CHARGING POINT

RANGE EXTENDER ASSEMBLY

Install the Range Extender dedicated mount onto the downtube and fix it in place with the original bolts and washers with the recommended torque setting of 5 Nm.
Install the Range Extender into the mount and secure it with the side o-ring.
The Range Extender bottle holder is compatible with standard bottles when the Range Extender is not installed.

CONNECTING THE RANGE EXTENDER TO RISE

Connect the Range Extender cable to the Range Extender charging point. Open the charging point cover on Rise and connect the free end of the Range Extender cable.

NOTICE
If Rise was On when connecting the Range Extender to the bicycle, the system will turn itself Off and you will need to turn Rise On again pressing the power button.
This happens so the system can reboot and recognize the Range Extender as part of the power system when Rise is turned On again. If you were recording an activity with your Garmin unit using Orbea RS Toolbox, this will have no effect on the data recorded in the activity. The Rise data will keep registering when you start using Rise again.
Once you turn Rise on, the Range Extender will be operative. It is not necessary to turn the Range Extender On.

OPERATION OF THE RANGE EXTENDER

The Range Extender power the EP8 RS motor directly. When using Rise with a Range Extender connected to the system, the motor will only draw power from the Range Extender until the Range Extender is depleted. When there is no charge left in the Range Extender, the internal battery will start powering the motor if it had any charge left.

BATTERY LEVEL

Combined battery level (Internal battery and Range Extender):
When a Range Extender is connected to Rise, the system calculates the total capacity of both the Range Extender and the internal battery (612 Wh) and the remaining battery level information for the system will take into account the charge left on both batteries out of the total 612 Wh capacity.
Examples:

306 WH DE 612 WH)
RANGE EXTENDER (252 WH)| 50% (126 WH)

486 WH DE 612 WH)
RANGE EXTENDER (252 WH)| 50% (126 WH)

The combined battery charge level will be visible on the EW-EN100 junction, the SC-EN800 display or the Orbea RS data field on compatible Garmin units.
Read the Checking the Battery Level section on this guide or the Rise Blue Paper to learn more about the different ways of checking the battery level on Rise.

Range Extender standalone battery level:
Read the Checking the Battery Level section on this guide or the Rise Blue Paper to learn more about the different ways of checking the battery level on Rise.

CHARGING THE RANGE EXTENDER

Read the Charging the Batteries section on this guide or the Rise Blue Paper to learn about the charging procedure of the Range Extender and the internal battery.

WWW.ORBEA.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>