niceboy Hive Air Sport Bluetooth Earphones User Manual
- June 6, 2024
- niceboy
Table of Contents
HIVE AIRSPORT
User Manual /Bluetooth Earphones
PRODUCT DESCRIPTION
- LED
- Multifunction button
- Port for charging
- LED charging indicators
- USB-C charging port
FIRST START-UP AND PAIRING
- Remove both earphones from the charging box and remove the stickers protecting the charging pins (3) on the earphones.
- Switch the earphones on by pressing and holding the multifunction button (2) on both earphones.
- The earphones will switch on and pair with each other. Once the LED (1) on one of the earphones starts flashing white and orange, the earphones are ready to connect to a Bluetooth device.
- Open the Bluetooth settings on your device and search for “Nice boy HIVE Airsport” on the list of available devices.
- Successful pairing is announced by an acoustic prompt.
When reconnecting to a device that has already been paired, simply remove the earphones from the box. They will switch on and connect to the device automatically.
SWITCHING ON AND OFF:
To switch the earphones on, simply remove them from the charging box, or
manually switch them on by pressing and holding both multifunction buttons.
To switch them off, simply place the earphones in the charging box. They will
turn themselves off and disconnect from your device. Correct storing of the
earphones in the box is indicated by the LED (1) turning red. When the
earphones are fully charged, the LED goes out. To switch the earphones off,
press and hold both multifunction buttons (2) for approx. 5 seconds.
MULTI FUNCTIONAL BUTTON – BASIC CONTROLS
| Double pressing any button: | play/pause |
|---|---|
| A single press of the right button: | increase the volume by one level, accept |
call/hang up
A single press of the left button:| reduce the volume by one level, accept
call/hang up
Long-press of the right button:| next song, reject the call
Long-press of the left button:| the previous song, reject the call
Triple press of the left button:| activate Siri / Google Assistant
CHARGING:
Before using the earphones for the first time, it is recommended to fully
charge the battery. Charge the earphones using the enclosed USB-C cable and a
5V/2A power adapter, or a USB port on a PC, power bank, etc. To charge the box
itself, connect the charging cable to the USB-C port (5). The LEDs (5) flash
during charging and remain lit when the battery is fully charged.
FACTORY SETTINGS:
In case of technical issues, reset the earphones to factory settings as
follows
- Disconnect and remove the earphones from all paired devices.
- Place both earphones in the charging box for at least 5 seconds.
- Remove both earphones from the charging box and press both multifunction buttons five times in quick succession.
- A successful factory reset is announced by a sound.
- You can now turn on Bluetooth mode on your device and connect to the earphones.
SPECIFICATIONS
| Bluetooth: | 5 |
|---|---|
| Supported Bluetooth profiles: | HFP, HSP, A2DP, AVRCP |
| Supported codecs: | AAC, SBC |
| Protection rating: | IPX6 |
| Transmission range: | 10 m |
| Frequency: | 20 Hz-20 kHz |
| Sensitivity: | 98 dB ± 3 dB |
| Speaker: | 8 mm |
| Impedance: | 32 Ω |
| Earphones battery capacity: | 40 mAh |
| Charging box battery capacity: | 400 mAh |
PACKAGE CONTENTS:
Niceboy HIVE Airsport earphones
Charging box
Spare earbuds
USB-C cable
Manual
This product complies with all the basic requirements of relevant EU directives.
USER INFORMATION FOR DISPOSING OF ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)
This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed of together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly. User information for disposing of electrical and electronic devices.
(Business and corporate use)
In order to correctly dispose of electrical and electronic devices for
business and corporate use, refer to the product’s manufacturer or importer.
They will provide you with information regarding all disposal methods and,
according to the date stated on the electrical or electronic device on the
market, they will tell you who is responsible for financing the disposal of
this electrical or electronic device. Information regarding disposal processes
in other countries outside the EU. The symbol displayed above is only valid
for countries within the European Union. For the correct disposal of
electrical and electronic devices, request the relevant information from your
local authorities or the device seller.
Importer to EU: RTB media s.r.o., Pretlucka 16,
Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>