britax One4life Click Tight Anti Rebound Bar Convertible Car Seat Instruction Manual

britax One4life Click Tight Anti Rebound Bar Convertible Car Seat

Anti-Rebound Bar

• Anti-Rebound Bar
• Anti-Rebound Bar Cover
• No Tools Required

IMPORTANT: The anti-rebound bar MUST be used rear-facing. DO NOT use forward-facing.

Installing the Anti-Rebound Bar

1. Open the CLICKTIGHT door. Squeeze the CLICKTIGHT release buttons underneath the front cover flap and lift to open (Fig. 1).
2. Insert the anti-rebound bar into the two openings at the front of the seat (Fig. 2).
3. Attach elastic bands from the cover to the hooks on the shell (Fig. 3).
4. Pull the anti-rebound bar to ensure it is properly set.

Removing the Anti-Rebound Bar

1. Open the CLICKTIGHT door.
2. Unhook elastic bands from the front of the seat (Fig. 4).
3. Push the inner red button. Pull the anti-rebound bar away on one side. Repeat on the other side (Fig. 5).

Cleaning

Sponge clean using warm water and mild soap. Towel dry.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>