britax P14764600_A Poplartm Car Seat Instruction Manual
- June 4, 2024
- Britax
Table of Contents
britax P14764600_A Poplartm Car Seat
Product Information
Specifications:
- Product Name: POPLARTM CAR SEAT
- Feature: ReboundReduceTM Stability Bar
- Manufacturer: Britax Child Safety, Inc.
- Country of Origin: China
Product Usage Instructions
Removing the ReboundReduceTM Stability Bar:
- Open the ClickTight.
- Lift the front cover flap.
- Squeeze the ClickTight release buttons.
- Push the stability bar release button and pull the stability bar away on one side. Repeat on the other side.
- Close the ClickTight.
Installing the ReboundReduceTM Stability Bar:
- Open the ClickTight.
- Lift the front cover flap.
- Squeeze the ClickTight release buttons.
- Insert the stability bar into the two openings at the front of the seat.
- Ensure the stability bar release buttons are completely engaged.
- Pull the stability bar away from the child restraint on both sides to confirm connections.
FAQ:
-
Q: How do I know if the ReboundReduceTM Stability Bar is properly installed?
A: To ensure proper installation, make sure the stability bar release buttons are fully engaged and confirm the connections by pulling the stability bar away from the child restraint on both sides. -
Q: What should I do if I encounter difficulties while removing or installing the stability bar?
A: If you face any challenges during the removal or installation process, refer to the user manual for detailed instructions or contact Consumer Services at 888.427.4829 or 704.409.1699.
Tools required:
- No tools needed
Kit Includes
ReboundReduceTM Stability Bar
Removing the Rebound Reduce Stability Bar
- Open the ClickTight.
- a. Lift the front cover flap (Fig 1).
- b. Squeeze the ClickTight release buttons (Fig 1).
- Push the stability bar release button and pull the stability bar away on one side. Repeat on the other side (Fig 2).
- Close the ClickTight.
Installing the Rebound Reduce Stability Bar
- Open the ClickTight.
- a. Lift the front cover flap (Fig 3).
- b. Squeeze the ClickTight release buttons (Fig 3).
- Insert the stability bar into the two openings at the front of the seat (Fig 4).
- Ensure the stability bar release buttons are completely engaged (Fig 5).
- Pull the stability bar away from the child restraint on both sides to confirm connections (Fig 6).
PoplarTM, ReboundReduceTM and Britax® are trademarks owned by Britax Child Safety, Inc. All rights reserved. ©2024 Britax Child Safety, Inc. This product and its components are subject to change without notice. Printed in China. Britax Child Safety, Inc., 4140 Pleasant Road, Fort Mill, SC 29708, U.S.A. Consumer Services: 888.427.4829 or 704.409.1699 www.Britax.com.