The SOURCE HRB 5035 Bluetooth True Wireless Stereo Earbuds User Manual

Bluetooth True Wireless Stereo Earbuds

HRB 5035

USER MANUAL READ BEFORE USING
FCC ID：2AOEC-T31
IC: 255A-8093128

PACKAGE CONTENTS

• HRB 5035 Wireless Earbuds
• On-The-Go Charging Case
• 6 x Silicone Eartips (big/middle/small three pairs, 2 small are attached)
• 1 x Charging Cord
• Operation Manual

PRODUCT DIAGRAM

1. Multi-Function Button
2. LED indicator
3. Charging Contact
4. Micro TYPE-C Port (Input)
5. Charging Case LED Indicator

PRODUCT SPECIFICATIONS

HOW TO CHARGE

Charging The Earbuds

1. When the battery of earbuds is low, the white indicator flashes 2 times every three minutes. At the same time, the voice prompts “low battery, please charge” And it will remains three times then goes off.
2. To recharge the Earbuds, simply place them into the charging case correctly and close the lid. The earbuds indicators keep white and then shut off when fully charged.

Charging The Charging case

1. When the battery of charging case is low, all lights go off.
2. To recharge the charging case, simply plug it with TYPE-C cable. The leds of 4 colors flash once according to red, yellow, green and blue, and then flash the corresponding lights according to the detected battery power. Long bright blue light after full charge

(Please check the battery level and charge status while charging the charge case as show below)

HOW TO PAIR

First Time to Pair with Devices:

Note: Before first time using.
put the earbuds into the charging case to fully charged. The two earbuds are no distinguish for master and slave earbuds, each one can be master and the other should be slave random during link between two earphones.

1. Open the charging Case and take the earbuds out. Earbuds will turn on automatically. Then entering paring mode after the Right & Left earbuds connected with each other (One of the earbuds indicator flashes red and blue)
2. Enable the Bluetooth on your device, search for earbuds pairing name “HRB 5035” and click to connect. (There will be a voice prompt “connected” after connected, and the earbuds indicators turn off)

(1) (2) (3)

Second Time to Pair with Devices:

Take two earbuds out of the charging case, they will re-connect with last paired device automatically.

• The earbuds turn off automatically when you put them beck to the charging case and close the lid.
  To manually power off, press and hold the earbud button for 4 seconds;
  To Manually power on, press and hold the earbud button for 2 seconds;

HOW TO WEAR

(1) Select the proper sized eartips

(2) Put earbuds into your ear canal.

(3) To get the best sound, the top of the carrying pouch should fit tight into the ringe of the ear.

HOW TO RESET PAIRING

When the headset is off, long press the multi-function button for 8 seconds respectively in the left and right ears. The white light of the headset flashes twice, There is a beep of 5 in the headset, indicating that the headset has cleared pairing record

HOW TO CARE FOR YOUR EARBUDS

Always store the earbuds in the charging case and safely protected.
Avoid storage at extreme temperatures (Above 65°C/149°F or below -10°C/14°F). Otherwise, it would shorten the battery life and may affect the earbuds.

CONTROLS

Listening to Music

Making and Answering Calls

FAQS

Questions

|

Answers

---|---
Q1. Can not turn on the earbuds.| The battery level is low. Charge the earbuds.
Q2. Can not find the earbuds Bluetooth name on device.|

1. The earbuds may be connected to a previously paired device. Turn off the connected device or move it out of range
2. Pairing may have been reset. Pair the earbuds with the Bluetooth device again as described in the user manual. (see “HOW TO PAIR”)

Q3. Pairing does not work.|

1. Put both earbuds into charging case.
2. Make sure you have disabled the Bluetooth function of any Previous connected Bluetooth devices.
3. On your Bluetooth device, delete “HRB 5035” from the Bluetooth list.
4. Pair your earbuds (see “HOW TO PAIR”)

Q4. How to reset pairing.|

1. When the headset is off, long press the multi-function button for 8 seconds respectively in the left and right ears.
2. The WHITE lights of the earbud will flash twice, indicating that the earbud has cleared the pairing record.

Q5. The earbuds cuts out and in.| Wear the earbuds with its ear tips facing down.
(Refer to the instruction “HOW TO PAIR”)
Q6. Other issues?| No bother to return back, feel free to contact us at www .cross-brain.co.jp
We promise you with a satisfied solution.

CORRECT DISPOSAL OF THIS PRODUCT

(Waste Electrical & Electrical Equipment)
This symbol shown on the package or its literature indicates that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human healthy from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

WARRANTY

HRB 5035 comes with an industry-leading 12 Months warranty that begins from date of purchase.

The warranty applies to the MS-TW11 Bluetooth Earbuds and necessary parts. The warranty does not apply to damage resulting from failure to follow the instructions, accidents, abuse, alterations, or disassembly by unauthorized individuals.

ARE YOU 100% SATISFIED?

If you have questions or concern of our product, don’t hesitate to contact us directly at:

Manufacture: Shenzhen Yanhuizhongchuang Electronics co., Ltd
Address: 3 Floor, Building A, Huidong Industrial, JiuWei Rd, Xixiang Street, Bao’an District, Shenzhen

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>