SIGNWAY DM1071-T Dynamic Detection Display User Manual
- June 5, 2024
- SIGNWAY
Table of Contents
SIGNWAY DM1071-T Dynamic Detection Display
Product Overview
Introduction
This dynamic detection display uses professional dynamic detection algorithms,
with strong dynamic detection performance, fast recognition speed, long
distance, non-contact, Supports the advantages of wearing mask recognition,
supports 1: 1 and 1: N face comparison and search, supports reminders without
wearing masks , supports ID card readers, fingerprint readers, IC card
readers, QR code readers. The expansion of various peripheral devices such as
card readers, gate heads, and door magnets.It can truly realize efficient and
fully automatic non-inductive recognition and passage in crowded places, and
can be widely used in office buildings, communities, schools, factories, etc.
related scenarios. 
Application scenario
Multi-mode selection
Mode 1: Dynamic Detection and permission verification
Enter personnel information in the management platform (access control point)
dynamic detection to verify the identity judge access control authority.
If the dynamic detection authentication fails, there is no access control; the
management platform records access control data corresponding to the
personnel.
Mode 2: Mask reminder mode
In mode one , click on the “mask detection attribute” in the management
platform, you can realize the voice reminder for the person without the mask,
without affecting dynamic detection and check in.
It is suitable for the entry and exit of designated personnel , such as
factories, schools, office buildings, residential areas, etc., Satisfy the
internal personnel dynamic detection requirements for entry ban.
Features
Strong dynamic detection performance
This dynamic detection display is built with dynamic detection algorithms,
with high accuracy and fast speed. It also supports accurate recognition in
the case of side faces, semi-occlusion, and blur. Especially in epidemic
situations, it can detect whether to wear a mask first, send out a voice
reminder for not wearing a mask, and then perform dynamic detection for the
person who has worn a mask.
The relevant parameters are as follows:
Dynamic detection:
- Dynamic detection accuracy: 99.99% (1: 1, FRR 1%)
- Living body detection accuracy: 0.01% (false recognition rate)
- Living detection distance: 0.5-1.2 meters
- Recognition speed: <300ms (20000 face database)
- Intelligent recognition: support 1: 1 face comparison, support 1: N face search
Mask recognition:
- Dynamic detection rate:> 92% (20000 human database)
- Reminder: Without mask reminder
Maximum 50000 face database
Based on the 20000 face database, the recognition speed of this dynamic
detection display is less than 300 MS, and supports expansion to 50000 face
database, which fully meets the needs of dynamic detection passage scenarios.
120DB ultra wide dynamic
This dynamic detection display adopts 2 million pixels living body recognition
binocular camera, built-in fill light, 120DB ultra-wide dynamic, no fear of
backlight and dark light environment.
Online / offline mode can be switched
The device terminal supports both online and offline modes, and the device
administrator can switch the identification mode according to the actual
situation. In offline mode, dynamic detection can be achieved without internet
connection.
Support multiple peripheral expansion
Support various peripheral expansion such as ID card reader, fingerprint
reader, IC card reader, QR code reader, gate, door sensor, etc.
Built-in high-performance ISP
The built-in high-performance ISP can restore the scene details under different optical conditions and ensure the image quality.
Rich interface, worry-free installation
It has a full specification tail wire to meet the needs of most scenarios. It
has a relay to control the door opening, including power supply, USB, RJ45,
lock control and RS232 /UART (multiple interfaces, optional)
Exquisite appearance, three bases are optional
7-inch aluminum alloy shell, exquisite atmosphere, wear-resistant and anti-
corrosion, provides three types of bases, wall-mounted, upright and desktop,
and the device supports an adjustable angle of 60 degrees to meet the
installation needs of different scenarios. 
Network background management system
Equipped with a powerful network management system Ezface, real-time recording whether to wear a mask,identification time and other information, built-in real-time monitoring, personnel management, equipment management, attendance management, data statistics and access rules and other functional modules to help managers quickly master data for unified remote management.
Technical Parameters
Technical parameters
Other parameters
Physical Dimension
Product size chart
Upright
Wall-mounted
Desktop
Installation method
Installation Method| ****
Picture Display
| ****
Remarks
---|---|---
Wall-mounted
| ****
| ****
Wall-mounted installation, can be fixed on the wall by installing the back plate
Upright
| |
Upright installation, suitable for fixed equipment such as channel gate
Desktop
| |
Desktop placement, can be moved at will, the scope of application is wider
Device installation
Note: The power controller needs to be connected to 220V, and other
accessories can be connected with a network cable. 
Interface Definition
The full-spec tail cable meets the needs of most scenarios,with relay control to open the door, including power supply, USB, RJ45, lock control,RS232 / UART (*)
- RS232 / UART multiplex an interface, optional
Electrical Performance
Project Definition
| ****
Minimal
| ****
Typical
| ****
Maximum
---|---|---|---
Power Parameters
| Voltage| —| 12V| —
Electric Current| —| —| 2000mA
Total Power| —| —| 15W
Electrical Parameters| Lock Control Signal Current| —| —| ****
500mA
Environment
| ****
Relative Humidity
| ****
—
| ****
—
| ****
80%
Operating Temperature
| ****
+20℃
| ****
—
| ****
+35℃
Storage temperature
| ****
-25℃
| ****
—
| ****
+60℃
Precautions
- After the machine is turned on, it takes about 15 minutes to heat up the machine to reach the thermal equilibrium state before use;
- Do not use the machine outdoors, the machine does not have waterproof function;
- During the installation and use of the machine, please strictly abide by the electrical safety regulations in the area of use;
- Do not disassemble and repair the machine by yourself, otherwise it will affect the equipment warranty;
- Avoid extreme environments such as extreme high temperature (or low temperature), high humidity, vibration, radiation, chemical corrosion, etc. during installation and use.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.