smaXtec pH PLUS BOLUS SX.2 Animal Care GmbH User Guide
- June 6, 2024
- SmaXtec
Table of Contents
smaXtec pH PLUS BOLUS SX.2 Animal Care GmbH User Guide
ACTIVATION
-
Please ensure that your smaXtec Base Station is activated and ready for use before starting the bolus initialisation process.
-
Pour the buffer solution pH 7.00 into a narrow container (please note minimum filling level) and remove the sponge from the sensor tip.
-
Place the smaXtec pH Plus Bolus into the container sensor head first and gently shake it.
-
Switch on the bolus with the magnet provided
- Assign bolus to an animal
The activation process is only completed when the bolus is assigned to an animal. This step is mandatory: Data will only be generated and displayed for assigned boluses.
ADMINISTRATION
Administer pH Plus Boluses within the next 4 hours using the smaXtec bolus applicator. Keep the bolus in the buffer solution until it is administered.
SYNCHRONISATION
© 2021 smaXtec animal care GmbH. All rights reserved.
smaXtec® is a trademark of smaXtec animal care GmbH.
This trademark may not be used without permission of
smaXtec animal care GmbH.
This user manual may not be copied. Changes regarding
this document will not be announced. Before using the
smaXtec products, please check if there is a new version
of this document available on the website:
http://www.smaxtec.com
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including
interference that may cause undesired operation
of the device.
SMAXTEC SUPPORT
You have questions or need assistance?
We are happy to help!
Support International
T +43 316 46 15 88 – 80
Belgiergasse 3 · 8020 Graz · Austria
E support@smaXtec.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>