Shenzhen Elenose Technology BH628 Bone Conduction Wireless Headphones Instruction Manual
- June 6, 2024
- Shenzhen Elenose Technology
Table of Contents
Manual Instruction for Bone Conduction
Wireless Headphones
Summary of button functions
- Power On/ Power Off/ Volume up/Next song
- Volume down/ Previous song
- Magnetic charging port
- LED indicator
- Multifunctional buttons: Pause/ Play/ Answer Phone Call/ End Phone Call/Voice Assistant
- Microphone
Controls
On: When the headphone is in a power-off state, press and hold the power
button for 3 seconds with blue LED flickering, reminding tone: power on.
Off: When the headphone is in power-on state, press and hold the power
button for 5 seconds with red LED flickering once, reminding tone: power off.
Connect BT: When the headphone is in a power-off state, press and hold it
for 3 seconds to enter a pairing state with red and blue LEDs flickering and
reminding tone: pairing. After the device (smartphone, tablet computer, etc.)
discovers 61-1628, press it to connect. Connected successfully: When the
headphone is successfully linked to the device, blue LED will flicker every 5
seconds with a reminding tone:
Connected Pause/play: In the BT connection music playback state, click
the multi-function button to pause, and then click the multi-function button
to play;
Answer/hang-up: In the incoming call state: click the multi-function
button to answer, long-press the multi-function button for 2 seconds to reject
the call. In the call state, click the multi-function button to hang up
VoI+: Press the Vol+ once to turn up the volume. Vol-: Press the Vol-
once to turn down the volume.
The next song: Long press “V+” for 2 seconds when music is playing
In a song: Long press -V-” for 2 seconds when music is playing
Voice assistant: Keep the BT link, double-click the multi-function button
to turn on the voice assistant, then double-click it again to exit.
Reset: After plugging the charging line, the headphone will be reset and
powered off for charging. Clear pairing information: Press the power button
and the volume off button for 5 seconds to clear the pairing information in
shutdown mode, Red and Blue light blinks 1 second spontaneously
Charging: In case of using the charging line for charging, connect the
headphone with the USB power. During the charging, the LED turns red. After
charging, the LED turns blue.
Principles of bone conduction
Most of the sound we hear is the result of sound waves passing through our eardrum to make it vibrate so that the sound waves can be conducted to the internal auditory canal. The other way is that the sound waves are directly conducted to the internal auditory canal through the vibration of the bone instead of the eardrum. This is another way of people hearing their own sound and this sound con-duction is called bone conduction.
How to wear
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
Specifications
Music playtime——- 6 hours(70% volume)
Standby time ———20 days
Charging time ——–2 hours
BT version——– —5.3
Speaker impedance ——-80±15%
Microphone sensitivity——– 38±3db
Product weight————- 38g±2g
Connection distance———– 15 meters
Charging voltage/current——— 5V/0.5A
Attentions
- Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
- Listening to music for an excessively long time makes you feel uncomfortable, please try to use a medium volume instead of a big one.
- No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.
- Do not throw, press the headphone or put it in the water.
- The headphone should keep away from fire, water, and high voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station. If there is any injury or property loss due to a violation of the above contents, we will not bear any responsibility.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RFexposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>