Oypla 3338 Carpet Knee Kicker User Manual
- June 6, 2024
- Oypla
Table of Contents
User Manual
*COLOUR MAY VARY
Carpet Knee Kicker
USER MANUAL Model No: 3337, 3338
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all
equipment, we cannot guarantee freedom from injury. The user assumes all risk
of injury due to use. All merchandise is sold on this condition, which no
representative of the company can waive or change.
- This product is not a toy and is only to be used for its designated purpose.
- Never carry out any alterations or modifications to this product.
- This product is intended for indoor use only.
- Only use this product on stable, level, and dry ground.
- Do not wear loose clothing or jewelry whilst using the product as they could be caught whilst the product is in use.
- Before using the product, inspect it to make sure that no parts are damaged or broken. If any part of the product is damaged it should be repaired or replaced by a qualified technician, replaced or returned.
- Always wear PPE when working with this product.
- Do not use this product in damp or wet locations.
- This product is not intended for use by persons (including children) with reduced physical, sensory, and mental capacities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the product by persons responsible for their safety.
- Clean only with a damp cloth. Do not use strong industrial cleaning substances or abrasive materials as these will damage the product.
- If the product is damaged or has any defects, please contact cservice@oypla.com
Operating Instructions
Operation
- Squeeze both of the adjustment buttons on the side of the handlebar and adjust the handle to the desired length. Release the adjustment buttons and the handle should hold itself into the released position.
- Remove the protective cover found on the pins.
- Turn the pin adjustment knob (found on the front of the carpet knee kicker) to the proper length for the carpet you are working with. The pin adjustment knob has seven settings, with the lower numbers standing for shorter pin lengths whilst the higher numbers are for the longer pin lengths. Turn the adjustment knob clockwise to decrease the pin length and counter-clockwise to increase the pin length.
NOTE: The pin length must be substantial enough to go through the top of
the carpet and into the clothlike backing, but not go through the back and
into the pad as this will damage the under a layer of the carpet.
4. Position the carpet knee kicker next to the tack strips with the pins
properly inserted into the carpet and carpet backing. Push your knee against
the knee pad to move the carpet onto the tack strips. Press the carpet down
onto the tack strips to secure it. Continue along the perimeter, repeating
this step as you go along. When you are finished, use the pin adjustment knob
to fully retract the pins and place the protective cover back over them. Make
sure the protective cover is secure. The nicks on the protective cover should
be facing the handle.
Care and Maintenance
-
Be sure to clean the carpet knee kicker regularly, removing any dirt or debris from the pins and grip pad.
-
Once the grip pads have worn down and need replacing, remove the two cross-head screws that hold the grip pad into place and install a new grip pad.
NOTE: Always ensure that the grip pads have been and are secured correctly before using. -
Never use oil on the pins or grip pads as this may cause discoloration or stain the carpet.
HAVE A QUESTION ABOUT YOUR PURCHASE?
OUR DEDICATED CUSTOMER SERVICES TEAM ARE HAPPY TO HELP
CONTACT THEM VIA:
TELEPHONE : 020 3600 2255
EMAIL : cservice@oypla.com
LIVE CHAT : www.oypla.com
PLEASE RETAIN A COPY OF THESE INSTRUCTIONS FOR FUTURE CONSULTATION
OYPLa.COM
An Official OYPLA Branded Product
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 3337, 3338