LIVALL C20 Smart Commuter Helmet User Guide

Smart Commuter Helmet C20
Quick Start Guide
& Warranty Information

Introduction

Welcome to the User Guide for LIVALL smart commuter helmets. Avoid crowds and ride free with the new C20 commuter helmet. Smart features include built-in SOS fall detection, LED lighting, and a sleek, waterproof design.
This Guide will help you better use this product. With continuous improvements of our products, this Guide will be updated from time to time. You can access the latest version and learn more about the helmet on www.livall.com.

Packing List

Helmet x 1 Quick Start Guide & Warranty Information x 1 Magnetic USB charging cable x 1

Wearing Instructions

| |
---|---|---
Incorrect| Incorrect| Correct
| |
Adjust the length of the chinstrap| Leave a gap as thick as one finger| Correctly position the helmet
Check whether the buckle is properly fastened

Power on

Hold the button at the back of the helmet for 2 seconds, then the LED taillight will blink for 10 seconds after the helmet is powered on, which means the helmet automatically enters adaptive warning light mode.

Remark: When powering on, you could check the remaining battery level of the helmet by the number of tail lights, all the 7 lights on indicate full power.

Power off
Hold the button at the back of the helmet for 2 seconds until all the LED taillight turns off.

Lighting Mode
lighting mode: After the helmet is powered on, press the button for a second to switch the three lighting modes in order. 1. adaptive warning mode A;2.adaptive warning mode B;3.keep warning light always on.

Adaptive Warning Lighting
2 seconds after power on, press the button (less than 1 second), the helmet will enter the adaptive warning lighting mode. In the daytime or in a bright environment, only the central LED will keep flashing, other LED will turn off automatically. While at night or in a dark environment, the whole taillight will keep flashing automatically.

Lighting Always-on Mode
In the daytime or in a bright environment, the whole taillight will keep flashing.

Brake warning light
When the helmet detects a clear deceleration, the whole taillight will light up for 1-2 seconds to warn the vehicles behind.
Comment: When the helmet shakes too heavy, the built-in sensor detects obvious deceleration to trigger the warning light always on, which is normal.

Auto Power-off
When the helmet keeps stationary for 20 minutes, it will automatically power off.

Auto Power-on
When the battery of the helmet is charged, shake the helmet a few times. It will power on automatically. (This function is off in the factory default setting, you can activate the function in the settings of LIVALL Riding App)

Charging

When the soft rubber lid with “image is opened, the Magnetic charging port will be seen. Insert a USB cable into the USB Charging cable interface of the helmet. Charging  starts when the central LED blinks. During charging, when the central LED stops blinking and turn off, charging is completed.

|
---|---
Turn on the helmet.| Swith on the Bluetooth on your phone and click to connect the “Smart Helmet” device.
LIVALL Riding App
http://livall.com/res/appdown/AppDownload.html

Only if the helmet is successfully connected to LIVALL Riding App, SOS alert feature can work.

Technical Specifications

Model:C20
Charging port : Magnetic USB
Battery : 3.7V/455mAh
Waterproof class : IPX4
Electricity parameter : DC 5V/1A
Charging time : 3-4 hours
Battery life : about. 26-36hrs for lighting all the time

Temperature: Storage Temperature: -20°C ~45°C. Temperature for use: 0°C~40°C. Temperature while charging: 0°C~40°C.
Notes: The above data is measured by LIVALL in a controlled environment, with room temperature at 25°C and specific light patterns. The actual data might be different according to the environment.

Performance standards:
USA: CPSC1203:1998, FCC Part 15 Rules
Europe: EN 1078: 2012+A1:2012

Considerations

1. The helmet contains electronic parts inside. Please do not take a long ride in the rain although the helmet can prevent the rain from splashing.
2.  After the helmet gets wet in the rain, the water droplets might occur in the chimney of tail LED lights. The water droplets will disappear when you put the helmet under  the ventilation environment for 1-2 days.
3. The helmet contains the battery of 3.7V/455mAh. The battery capacity varies with temperature change. The battery life can decay when the helmet is used at low  temperatures or below Zero degrees Celsius.
4. Trying to clean the golden colour contacts of the charging plug sheet with metal or hard tools such as blades or tweezers is strictly forbidden. Please use cotton swabs with  clean water or alcohol in case of cleaning. Please make sure the charging plug is clean and try while charging the helmet.
5. If the electronic functions do not work, please charge the helmet for 3 hours and then check if it works normally.
6. The built-in battery is forbidden to be disassembled, squeezed, heated or burned. It is also forbidden to use screwdrivers and other sharp devices breaking down or prying  apart the battery. The above operations may make the battery caught fire.
7. Please do not place the helmet with sharp objects, avoiding to damage the helmet.
8. The helmet contains impact detection devices. Only if you connect your helmet with LIVALL Riding App, start ride mode on the App and your helmet suffers from the  heavy impact, SOS alert feature can be triggered. Your emergency contacts set on LIVALL Riding App can accordingly receive your SOS messages.

Note:

1. Problems such as network anomalies, may result in the failure to successfully send or receive SOS messages.
2. To maintain efficient battery life, it is recommended that the helmet be fully charged before any long-term storage (six months to one year).

Instructions for Use and Care

1. That the helmet can only protect if it fits well and that the buyer should try different sizes and choose the size which feels secure and comfortable on the head.
2. That the helmet should be adjusted to fit the user e.g. the straps positioned so that they do not cover the ears, the buckle positioned away from the jawbone and the straps  and buckle adjusted to be both comfortable and firm.
3. How the helmet should be position on the head to ensure the intended protection is provided (e.g. that it should be placed so as to protect the forehead and not be pushed  too far over the back of the head.
4. That a helmet cannot always protect against injury.
5. That a helmet subjected to a severe impact should be discarded and destroyed.
6. A statement of the danger of modifying or removing any of the original component parts of the helmet other than as recommended by the manufacturer, and that helmets  should not be adapted for the purpose of fitting accessories in a way not recommended by the manufacturer.
7. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.
8. Take good care of the product, do not wash the surface of the helmet with corrosive solvent, do not strike the helmet;
9. Validity: Valid for 3 years without impact and under normal use.

Electronic functions troubleshooting

During the usage, if the following troubles occur, please charge the product according to quick guide of the model(the helmet can be reset during the charging). If the problems still can not be solved, please contact the aftersales service center.
(After-sales email: riding@livall.com)

Faults:

1. Can not be charged or turn-off normally;
2. The helmet is turn on, but the lights, micphone, speakers etc can not work normally;
3. After power on, it turns off automatically in a short time.
   Note: Please refer to the quick guide of the specific model for function details.

This helmet is in conformity with the regulation (EU) 2016/425; This helmet is in conformity with the Personal Protective Equipment (Enforcement) Regulations 2018;
LIVALL Tech Co., Ltd. declare that the full EU Declaration of conformity and UK Declaration of conformity are available on the Internet at http://www.smart4u.ai/serverdetailen

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

www.livall.com

Designed and manufactured in Shenzhen, China

Approved body:
ITS Testing Services(UK) Ltd., Centre Court, Meridian Business Park, Leicester LE19 1WD. UKCA AB0362
Notified Body:
Telefication B.V. with its office located at Wilmersdorf 50, 7327 AC Apeldoorn, The Netherlands. Notified Body No.
0560

Original Design Manufacturer: SSD Tech Co., Ltd.
Address: 904, R&D Building Tsinghua Hi-Tech Park, NanShan, Shenzhen, China
Postal Code: 518057
Website: www.livall.com
Support & Service E-mail: support@livall.com

CX-QO-V1.5

Documents / Resources

| LIVALL C20 Smart Commuter Helmet [pdf] User Guide
C20, 2AEKF-C20, 2AEKFC20, C20 Smart Commuter Helmet, C20, Smart Commuter Helmet
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>